She is back. - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Heavy Evy · 02-25-2013, 01:55 PM

Quote:

Originally Posted by BB72CHEVKT

Good idea. I took it to Discount Tire today and they would not do it because the front tires do not meet the load capacity of the sub. I will take it some where else.

This is crap! You're burb is a halfton and doesn't "require" higher load tires. I bet they didn't want to balance the tires because they knew it would be a pain to get them right. I've balanced alot of those wheels and they can be a headache to balance but all it takes is a little extra effort and your good to go. When is the vibration happening? Usually tires won't vibrate under 60 mph unless there seperated.

**richard2717** · 02-20-2013, 05:35 PM

Quote:

Originally Posted by BB72CHEVKT

Yes. The vibration was there befor the tranny shop. It has a new driveshaft since I changed to a 700r4 that is supposed to be balanced with new ujoints. There is also a new billet carrier bearing from CPP.

When the driveshaft was installed were all of the Ujoints put in the correct position from each other? In other words all the ujoint caps should line up with each other down the length of the shafts or it will throw the shaft out of balance. It would happen when the two sections are slid together at the carrier bearing. Just a thought.

Richard

Splash4195 · 02-19-2013, 05:08 PM

Nice Burb!

**lolife99** · 02-23-2013, 08:58 PM

Get your issues fixed???

BB72CHEVKT · 02-23-2013, 09:35 PM

Quote:

Originally Posted by lolife99

Get your issues fixed???

Still have a vibration in the driveline and possibly still need a higher amp alternator. I also have some 1" spacers being made for the rear wheels. I am going to take it to have the rear gears changed to 3.73 as I currently have a 2.8??? something and that is not good with the 700r4 I just had rebuilt. She does drive really good otherwise. I have put 200 miles on her this week but need to get the driveline fixed ASAP.

**Dieselwrencher** · 02-24-2013, 02:10 AM

At least you are getting through some of the issues and can drive it right now.

Crappy roads kill that here for us.

**Ol Blue K20** · 02-25-2013, 01:01 PM

definatly helps to use a shop you trust, but I still wanta beer LOL

BB72CHEVKT · 02-25-2013, 01:20 PM

Quote:

Originally Posted by Ol Blue K20

definatly helps to use a shop you trust, but I still wanta beer LOL

I had a few while we were fishing Saturday. My daughter caught her a nice bass so I had to get the camera and thought the beer pic was cool.

**Ol Blue K20** · 02-25-2013, 01:24 PM

Quote:

Originally Posted by BB72CHEVKT

I had a few while we were fishing Saturday. My daughter caught her a nice bass so I had to get the camera and thought the beer pic was cool.

Man, thats a nice catch, thats real pretty spot also.

shawno72 · 03-15-2013, 10:36 AM

And looks a 1000 times better than the 2 stangs you parked in between

Number98 · 03-15-2013, 04:42 PM

Quote:

Originally Posted by shawno72

And looks a 1000 times better than the 2 stangs you parked in between

Hey... watch it on the Shelby...

**Ol Blue K20** · 03-15-2013, 10:37 AM

Great, that means you've got most the bugs worked out. Congradulations and nice pics.

BB72CHEVKT · 03-15-2013, 10:46 AM

Quote:

Originally Posted by shawno72

And looks a 1000 times better than the 2 stangs you parked in between

The guy in the red stang was killing himself cleaning his rig. My clean up took 15 minutes.

Quote:

Originally Posted by Ol Blue K20

Great, that means you've got most the bugs worked out. Congradulations and nice pics.

I have some pinion shims ordered which I hope will solve the vibration issue and I still need to swap to 3.73's so the 700r4 will operate better. I also have some wheel spacers for the rear on the way. This town has some major dips coming off the roadways into parking lots.

Bigblueburban · 03-15-2013, 07:38 PM

Love the burb. Nice catch. I have the same mirrors as well. And I like your wheel.... Nice build. Glad it's on the road
Posted via Mobile Device

**Dieselwrencher** · 03-15-2013, 09:13 PM

Your burb sure does look sweet man!

BB72CHEVKT · 05-13-2013, 03:37 PM

I entered Trixie in her first car show this weekend and she got a little love.

**Ol Blue K20** · 05-13-2013, 05:54 PM

Well, it looks great! Congrats! She deserves a little love

shawno72 · 05-13-2013, 06:37 PM

Did you laugh when you told them it WAS finished

5150 · 05-13-2013, 06:43 PM

^ I was thinking the same thing.
Posted via Mobile Device

BB72CHEVKT · 05-14-2013, 03:00 PM

I probably should have chose a different category but it seemed to fit best since I still have some work to be done.

**70cst** · 05-14-2013, 10:30 PM

That is one

BB72CHEVKT · 06-13-2013, 10:34 PM

Got a few goodies for the burb. I picked up a set of 5" drop springs for the rear and a old skool Kenwood KRC 5001 shaft style stereo 50 watts x4. I hope these spring with the 2" block bring the rear a little closer to the ground. The springs that are on there were bought new but second hand I am still not convinced they were a 4" spring. I should be good since we notched the rear. Since it is my daily I got to find time to get them swapped when we aren't at the lake.

BB72CHEVKT · 06-28-2013, 01:36 PM

The burb has been in the shop the last few days and we have solved the vibration in the drive line. The shop that installed the 700r4 and had the driveshaft cut down shortened it too much. We lengthened the front drive shaft an inch and also installed 4 degree shims to correct pinion angle. They changed the spider and axel gears and the right side axel and bearing. I also determined I already have 3.73's. The place that did the initial work told me I had 2.8??? some thing and I thought that is why sometime the 700r4 is hunting for a gear from 3rd to 4th sometimes. So I will get with the guy who rebuilt the tranny and see what he can do about that. I still haven't installed the new rear spings or radio but am super happy that my vibration is gone. I took it to my old driveline shop in Dallas and drove it about a hundred miles to get back to work with no problems.

**lolife99** · 06-28-2013, 01:51 PM

Isn't installing the new rear springs (and 2" lowering blocks),... going to affect the 4 degree pinion shim you just put in?
And possibly the driveshaft total length?

BB72CHEVKT · 06-28-2013, 03:47 PM

Quote:

Originally Posted by lolife99

Isn't installing the new rear springs (and 2" lowering blocks),... going to affect the 4 degree pinion shim you just put in?
And possibly the driveshaft total length?

I have thought about and I am not smart enough to know if it will mess things up. If they mess things up I will change it back.

02-19-2013, 05:08 PM	#3
Splash4195 Registered User Join Date: Jan 2010 Location: Minnesota Posts: 341	Re: She is back. Nice Burb!

02-23-2013, 08:58 PM	#4
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,683	Re: She is back. Get your issues fixed??? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-24-2013, 02:10 AM	#6
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,138	Re: She is back. At least you are getting through some of the issues and can drive it right now. Crappy roads kill that here for us. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

02-25-2013, 01:01 PM	#7
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: She is back. definatly helps to use a shop you trust, but I still wanta beer LOL __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

03-15-2013, 10:36 AM	#10
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: She is back. And looks a 1000 times better than the 2 stangs you parked in between __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

03-15-2013, 10:37 AM	#12
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: She is back. Great, that means you've got most the bugs worked out. Congradulations and nice pics. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

03-15-2013, 07:38 PM	#14
Bigblueburban Registered User Join Date: May 2010 Location: Tampa Florida Posts: 53	Re: She is back. Love the burb. Nice catch. I have the same mirrors as well. And I like your wheel.... Nice build. Glad it's on the road Posted via Mobile Device

03-15-2013, 09:13 PM	#15
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,138	Re: She is back. Your burb sure does look sweet man! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

05-13-2013, 03:37 PM	#16
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,948	Re: She is back. I entered Trixie in her first car show this weekend and she got a little love. Attached Images __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

05-13-2013, 05:54 PM	#17
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: She is back. Well, it looks great! Congrats! She deserves a little love __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

05-13-2013, 06:37 PM	#18
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: She is back. Did you laugh when you told them it WAS finished __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

05-13-2013, 06:43 PM	#19
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	Re: She is back. ^ I was thinking the same thing. Posted via Mobile Device __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

05-14-2013, 03:00 PM	#20
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,948	Re: She is back. I probably should have chose a different category but it seemed to fit best since I still have some work to be done. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

05-14-2013, 10:30 PM	#21
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,339	Re: She is back. That is one __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

06-13-2013, 10:34 PM	#22
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,948	Re: She is back. Got a few goodies for the burb. I picked up a set of 5" drop springs for the rear and a old skool Kenwood KRC 5001 shaft style stereo 50 watts x4. I hope these spring with the 2" block bring the rear a little closer to the ground. The springs that are on there were bought new but second hand I am still not convinced they were a 4" spring. I should be good since we notched the rear. Since it is my daily I got to find time to get them swapped when we aren't at the lake. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400



Register or Log In To remove these advertisements.

06-28-2013, 01:36 PM	#23
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,948	Re: She is back. The burb has been in the shop the last few days and we have solved the vibration in the drive line. The shop that installed the 700r4 and had the driveshaft cut down shortened it too much. We lengthened the front drive shaft an inch and also installed 4 degree shims to correct pinion angle. They changed the spider and axel gears and the right side axel and bearing. I also determined I already have 3.73's. The place that did the initial work told me I had 2.8??? some thing and I thought that is why sometime the 700r4 is hunting for a gear from 3rd to 4th sometimes. So I will get with the guy who rebuilt the tranny and see what he can do about that. I still haven't installed the new rear spings or radio but am super happy that my vibration is gone. I took it to my old driveline shop in Dallas and drove it about a hundred miles to get back to work with no problems. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400 Last edited by BB72CHEVKT; 06-28-2013 at 01:39 PM. Reason: correct info

06-28-2013, 01:51 PM	#24
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,683	Re: She is back. Isn't installing the new rear springs (and 2" lowering blocks),... going to affect the 4 degree pinion shim you just put in? And possibly the driveshaft total length? __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

Register or Log In To remove these advertisements.