spindle lock washer- 14 bolt - The 1947 - Present Chevrolet & GMC Truck Message Board Network

DBear · 03-08-2015, 02:03 AM

Is it necessary to replace the spindle lock washer on a GM 14 bolt axle? I am referring to the on that has multiple tabs on it that bend down over the lock nut...thanks

DBear · 03-08-2015, 02:12 AM

This one....some website says it's not re-useable???

DWilbur · 03-09-2015, 08:46 PM

I have reused them and only replaced if the tabs were broken off.

DirtyLarry · 03-10-2015, 12:08 PM

I'll reuse them about twice then replace them.

They're pricy tho....about $50 a side from Napa. PN 6301660

DWilbur · 03-10-2015, 06:37 PM

I paid $22.00 for my D60 front per side from ORD. they might have them for less.

BLAZERMAN · 03-10-2015, 07:41 PM

I reuse them if they are in good shape, I have bought them from my local truck repair shop. Any Dorman dealer should have them just make sure and take your old one in with you.
I prefer to use the later style lock that uses a wire retainer ring and a key.

RedRoad · 03-10-2015, 09:13 PM

is this the one you need?

DORMAN Part # 618049

03-08-2015, 02:03 AM	#1
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 861	spindle lock washer- 14 bolt Is it necessary to replace the spindle lock washer on a GM 14 bolt axle? I am referring to the on that has multiple tabs on it that bend down over the lock nut...thanks

03-08-2015, 02:12 AM	#2
DBear Registered User Join Date: Nov 2008 Location: Rowlett, TX Posts: 861	Re: spindle lock washer- 14 bolt This one....some website says it's not re-useable??? Attached Images

03-09-2015, 08:46 PM	#3
DWilbur Registered User Join Date: Aug 2013 Location: San Jose Ca Posts: 965	Re: spindle lock washer- 14 bolt I have reused them and only replaced if the tabs were broken off.

03-10-2015, 12:08 PM	#4
DirtyLarry Windy Corner of a Dirty Street Join Date: Jun 2003 Location: Pueblo West, Colorado Posts: 2,926	Re: spindle lock washer- 14 bolt I'll reuse them about twice then replace them. They're pricy tho....about $50 a side from Napa. PN 6301660 __________________ Current vehicle collection: 1978 Chevrolet K10, 8.1L, NV4500, NP205 1989 Chevrolet Suburban, 8.1L, NV4500, NP241 1993 Chevrolet C1500 Sportside, TBI 7.4L, 4L60E 2001 Chevrolet K2500HD, Ext Cab, SWB, 8.1L, ZF 6 speed 2014 Chevrolet Impala LTZ 3.6L Vortec 8.1L because life is too short to tolerate underpowered vehicles Instagram

03-10-2015, 06:37 PM	#5
DWilbur Registered User Join Date: Aug 2013 Location: San Jose Ca Posts: 965	Re: spindle lock washer- 14 bolt I paid $22.00 for my D60 front per side from ORD. they might have them for less.

03-10-2015, 07:41 PM	#6
BLAZERMAN Currently Blazerless Join Date: Apr 2000 Location: St. Joseph Mo. Posts: 4,826	Re: spindle lock washer- 14 bolt I reuse them if they are in good shape, I have bought them from my local truck repair shop. Any Dorman dealer should have them just make sure and take your old one in with you. I prefer to use the later style lock that uses a wire retainer ring and a key. __________________ 1972 C/30 133" W.B. C&C 1970 GMC 3500 157" W.B. single wheel C&C

03-10-2015, 09:13 PM	#7
RedRoad Registered User Join Date: Jan 2015 Location: Los Angeles California Posts: 927	Re: spindle lock washer- 14 bolt is this the one you need? DORMAN Part # 618049



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.