The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-17-2020, 09:54 PM   #1
Driver_WT
Registered User
 
Driver_WT's Avatar
 
Join Date: Dec 2017
Location: River John, NS
Posts: 448
Fuel Gauge Does Not Work

The fuel gauge does not work in my 53 Chevy Truck. Are there any easy fixes or replacements available? Thanks.

Wade
__________________
53 Chevy 3100, SBC 355, 700R4, S10 frame, Ford 8.8 rear with 4.11 gears, front disc & rear drum brakes
Driver_WT is offline   Reply With Quote
Old 11-18-2020, 12:01 AM   #2
jweb
Registered User
 
jweb's Avatar
 
Join Date: Apr 2010
Location: Oregon
Posts: 1,168
Re: Fuel Gauge Does Not Work

Are you sure the gauge is the problem? The original gauge would be 6v, you may need a 12v gauge. Here an example.

https://www.classicparts.com/1949-53...nfo/24%2D700D/
__________________
1951 Truck, LS1/4L60
1964 Suburban, current project
2014 Silverado daily driver
1953 Westerner "canned ham" trailer, rebuilt
1974 Prowler trailer, rebuilt
jweb is offline   Reply With Quote
Old 11-18-2020, 12:11 AM   #3
nvrdone
Registered User
 
Join Date: Dec 2011
Location: Moxee WA
Posts: 1,419
Re: Fuel Gauge Does Not Work

or you may need a voltage drop. can you be more specific about what the problem is?
__________________
49 chevy 3100 3 window. 327 / m21 4 spd, 12 bolt w/ 3:55's
Bought in 1973 for $235.00. Had it longer than my wife & Kids!!
nvrdone is offline   Reply With Quote
Old 11-18-2020, 02:13 AM   #4
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,243
Re: Fuel Gauge Does Not Work

If you have the S010 tank or another late model tank the resistance in the sending unit is wrong. Stock senders have 30 ohms, late model senders have 90 Ohms. The gauge does need to be a 12 volt gauge or have the correct voltage reducer on it.

Still it is near impossible to come up with other suggestions without all of the specifics. The more information you give on gauge, wiring, tank unit, the better someone is able to come up with a viable suggestion.
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.
mr48chev is offline   Reply With Quote
Old 11-18-2020, 07:31 AM   #5
Driver_WT
Registered User
 
Driver_WT's Avatar
 
Join Date: Dec 2017
Location: River John, NS
Posts: 448
Re: Fuel Gauge Does Not Work

Sorry guys, you are right. I need to provide more info. Gas tank and sending unit are from S10 so 0 to 90 ohm (I was using a 47 ohm resistor in parallel with the gas gauge which should have made the gauge read close). I totally forgot that the gas gauge would be 6 volt. So looks like the best option would be a new 12 volt gas gauge.

Thanks for the help.
__________________
53 Chevy 3100, SBC 355, 700R4, S10 frame, Ford 8.8 rear with 4.11 gears, front disc & rear drum brakes
Driver_WT is offline   Reply With Quote
Old 11-18-2020, 10:23 AM   #6
nvrdone
Registered User
 
Join Date: Dec 2011
Location: Moxee WA
Posts: 1,419
Re: Fuel Gauge Does Not Work

easy way is to put a 12 v to 6 v resistor on the stock gas gauge if you are using the stock gauge. i think Brothers and other vendors have them
__________________
49 chevy 3100 3 window. 327 / m21 4 spd, 12 bolt w/ 3:55's
Bought in 1973 for $235.00. Had it longer than my wife & Kids!!

Last edited by nvrdone; 11-18-2020 at 10:23 AM. Reason: spelling
nvrdone is offline   Reply With Quote
Old 11-18-2020, 11:15 AM   #7
jweb
Registered User
 
jweb's Avatar
 
Join Date: Apr 2010
Location: Oregon
Posts: 1,168
Re: Fuel Gauge Does Not Work

Quote:
Originally Posted by nvrdone View Post
easy way is to put a 12 v to 6 v resistor on the stock gas gauge if you are using the stock gauge. i think Brothers and other vendors have them
I forgot about the voltage reducers. Here's one that should work:
https://www.speedwaymotors.com/Speed...aign=CSEGOOGLE
__________________
1951 Truck, LS1/4L60
1964 Suburban, current project
2014 Silverado daily driver
1953 Westerner "canned ham" trailer, rebuilt
1974 Prowler trailer, rebuilt
jweb is offline   Reply With Quote
Old 11-18-2020, 09:49 PM   #8
Driver_WT
Registered User
 
Driver_WT's Avatar
 
Join Date: Dec 2017
Location: River John, NS
Posts: 448
Re: Fuel Gauge Does Not Work

Thanks for the info on voltage reducers. I also have a 1935 Graham that I need to get started on, so this info on getting down to 6 volts will come in handy for the Graham project as well.
__________________
53 Chevy 3100, SBC 355, 700R4, S10 frame, Ford 8.8 rear with 4.11 gears, front disc & rear drum brakes
Driver_WT is offline   Reply With Quote
Old 11-18-2020, 09:51 PM   #9
Driver_WT
Registered User
 
Driver_WT's Avatar
 
Join Date: Dec 2017
Location: River John, NS
Posts: 448
Re: Fuel Gauge Does Not Work

1935 Graham, not a Chevy truck, but a pretty cool project with a great body and frame.
Attached Images
 
__________________
53 Chevy 3100, SBC 355, 700R4, S10 frame, Ford 8.8 rear with 4.11 gears, front disc & rear drum brakes
Driver_WT is offline   Reply With Quote
Old 11-18-2020, 11:12 PM   #10
mr48chev
Registered User
 
mr48chev's Avatar
 
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,243
Re: Fuel Gauge Does Not Work

Reading this post on stove bolt I see where you got the 47 ohm resistor thing https://www.stovebolt.com/ubbthreads...&Number=100898 It looks like the OP there had the same problem November 7, 2006 and the resistor wasn't a real solution. There the solution was swapping the resistor in the sender in the tank out for a 30 ohm resistor. That still may be the best solution.

Searching around on the net I found this unit from Speedway.

Some serious homework and question asking would be needed but this unit may be a solution. https://www.speedwaymotors.com/Speed...ule,66534.html
__________________
Founding member of the too many projects, too little time and money club.

My ongoing truck projects:
48 Chev 3100 that will run a 292 Six.
71 GMC 2500 that is getting a Cad 500 transplant.
77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.

Last edited by mr48chev; 11-18-2020 at 11:23 PM.
mr48chev is offline   Reply With Quote
Old 11-19-2020, 07:28 AM   #11
Driver_WT
Registered User
 
Driver_WT's Avatar
 
Join Date: Dec 2017
Location: River John, NS
Posts: 448
Re: Fuel Gauge Does Not Work

Quote:
Originally Posted by mr48chev View Post
Reading this post on stove bolt I see where you got the 47 ohm resistor thing https://www.stovebolt.com/ubbthreads...&Number=100898 It looks like the OP there had the same problem November 7, 2006 and the resistor wasn't a real solution. There the solution was swapping the resistor in the sender in the tank out for a 30 ohm resistor. That still may be the best solution.

Searching around on the net I found this unit from Speedway.

Some serious homework and question asking would be needed but this unit may be a solution. https://www.speedwaymotors.com/Speed...ule,66534.html
Interesting. I had never seen these before. Thank you.
__________________
53 Chevy 3100, SBC 355, 700R4, S10 frame, Ford 8.8 rear with 4.11 gears, front disc & rear drum brakes
Driver_WT is offline   Reply With Quote
Old 11-19-2020, 12:16 PM   #12
1project2many
Registered User
 
Join Date: Mar 2012
Location: Lakes Region NH
Posts: 3,149
Re: Fuel Gauge Does Not Work

Changing the tank sender is a better idea than using a parallel resistor. The parallel resistor solution is very inaccurate when the tank is not full or empty.

Also, with the quality of today's modern electronics I would consider getting a voltage regulator rather than a resistor to convert 12V to 6V. Today's 12V systems typically run at 14.5V. It would take a very interesting resistor to maintain a constant voltage with a 2.5V range on the supply.
DC - DC Voltage Regulator.
1project2many is offline   Reply With Quote
Old 11-20-2020, 10:58 PM   #13
mick53
Registered User
 
Join Date: Oct 2018
Location: Warsaw IN
Posts: 881
Re: Fuel Gauge Does Not Work

I never had a gauge but I always had a tape measure to use as a dipstick. I got about 10 miles to the inch on my 235.
mick53 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:56 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com