Alan Grove low mount a/c bracket for ls motor - The 1947 - Present Chevrolet & GMC Truck Message Board Network

j-dogg · 08-25-2013, 05:26 PM

Has anyone used the Alan Grove low mount ls truck motor low mount ac compressor bracket? I'll be doing the ls swap soon and am trying to keep the ac compressor in the low position without trimming the frame or fabbing my own motor mounts. I can't tell from the pictures on their website, but it looks like there might be enough clearance with this setup to use most aftermarket motor mounts without needing to modify them.

http://www.alangrovecomponents.com/LS.htm

j-dogg · 08-26-2013, 10:34 PM

Bump. Anyone have an opinion on if it looks like it'd work??

69sinker · 08-26-2013, 10:52 PM

Ill take a look at my truck tomorrow night, but I don't think it will work without trimming frame. Stay tuned.
Posted via Mobile Device
Posted via Mobile Device

STOCKISH · 08-27-2013, 07:50 AM

Just a FYI, I get a Malicious URL warning everytime I open this particular thread. I wouldnt click on anything.

67 chevelle · 08-27-2013, 08:26 AM

sanden 7176 compresor
gm 38194 tensioner
a couple spacers and simple brackets you fab , the spacers I made from 3/8s ridged

I have camaro power stearing , and alternator on the drivers side of engine but the truck drive works just as well , truck water pump

67 chevelle · 08-27-2013, 09:18 AM

not ridged , galvanized

08-25-2013, 05:26 PM	#1
j-dogg Registered User Join Date: Sep 2000 Location: Texas Posts: 189	Alan Grove low mount a/c bracket for ls motor Has anyone used the Alan Grove low mount ls truck motor low mount ac compressor bracket? I'll be doing the ls swap soon and am trying to keep the ac compressor in the low position without trimming the frame or fabbing my own motor mounts. I can't tell from the pictures on their website, but it looks like there might be enough clearance with this setup to use most aftermarket motor mounts without needing to modify them. http://www.alangrovecomponents.com/LS.htm

08-26-2013, 10:34 PM	#2
j-dogg Registered User Join Date: Sep 2000 Location: Texas Posts: 189	Re: Alan Grove low mount a/c bracket for ls motor Bump. Anyone have an opinion on if it looks like it'd work??

08-26-2013, 10:52 PM	#3
69sinker Registered User Join Date: Nov 2012 Location: eldred,il Posts: 503	Re: Alan Grove low mount a/c bracket for ls motor Ill take a look at my truck tomorrow night, but I don't think it will work without trimming frame. Stay tuned. Posted via Mobile Device Posted via Mobile Device __________________ My 69 cst lwb 2wd LS1 swap 5.7/4L60e build http://67-72chevytrucks.com/vboard/s...d.php?t=589869

08-27-2013, 07:50 AM	#4
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: Alan Grove low mount a/c bracket for ls motor Just a FYI, I get a Malicious URL warning everytime I open this particular thread. I wouldnt click on anything. __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

08-27-2013, 08:26 AM	#5
67 chevelle Registered User Join Date: May 2013 Location: WEST PALM FLORIDA Posts: 1,174	Re: Alan Grove low mount a/c bracket for ls motor sanden 7176 compresor gm 38194 tensioner a couple spacers and simple brackets you fab , the spacers I made from 3/8s ridged I have camaro power stearing , and alternator on the drivers side of engine but the truck drive works just as well , truck water pump

08-27-2013, 09:18 AM	#6
67 chevelle Registered User Join Date: May 2013 Location: WEST PALM FLORIDA Posts: 1,174	Re: Alan Grove low mount a/c bracket for ls motor not ridged , galvanized



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.