MO Financially friendly pre-owned truck parts... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Already Gone** · 11-19-2016, 10:27 AM

Fred, just wanted to say thank you and that you are a great guy and I'm sure the board members appreciate you taking the time to remove form the trucks, post on here and ship a lot of small parts for $5/$10/$15 where you aren't making anything for your time but helping out the other board members.

**gmc 2500 4x4** · 11-19-2016, 11:53 AM

i was gona say the same thing, cheers fred!
i need the hi beam

**specialtyretail** · 11-19-2016, 02:10 PM

Quote:

Originally Posted by Already Gone

Fred, just wanted to say thank you and that you are a great guy and I'm sure the board members appreciate you taking the time to remove form the trucks, post on here and ship a lot of small parts for $5/$10/$15 where you aren't making anything for your time but helping out the other board members.

Awwww shucks,, I appreciate the kind words but it ain't nothing. It gives me something to do, hopefully helps our fellow truck guys out and gives me some pocket change for BBQ. Hope it helps a few people out. Thanks for the complements. Now,, let's sell some parts, the smoker is empty.

**specialtyretail** · 11-19-2016, 02:11 PM

Quote:

Originally Posted by gmc 2500 4x4

i was gona say the same thing, cheers fred!
i need the hi beam

Thank you as well. Consider the bulb yours... Thanks, Fred.

54Caddy · 11-20-2016, 02:00 PM

I'll take the clutch block off

**chevypoint** · 11-20-2016, 07:09 PM

I'll take the tailgate trim, if it's still available?

**specialtyretail** · 11-20-2016, 08:41 PM

Quote:

Originally Posted by chevypoint

I'll take the tailgate trim, if it's still available?

It is yours. Thanks, Fred.

**specialtyretail** · 11-20-2016, 08:43 PM

Quote:

Originally Posted by 54Caddy

I'll take the clutch block off

Consider it yours. Thanks, Fred.

**chevypoint** · 11-20-2016, 09:37 PM

Originally Posted by chevypoint View Post
I'll take the tailgate trim, if it's still available?

Quote:

Originally Posted by specialtyretail

It is yours. Thanks, Fred.

Payment sent

Thank you

b.sharp · 11-21-2016, 12:56 PM

Do you have the linkage rod that goes from the pedal assembly you have listed to the carb for a V8 truck? I am searching for one to put on a project truck.

Thank you,

**specialtyretail** · 11-21-2016, 01:27 PM

Quote:

Originally Posted by b.sharp

Do you have the linkage rod that goes from the pedal assembly you have listed to the carb for a V8 truck? I am searching for one to put on a project truck.

Thank you,

I just may have. I will check this evening and see. Thanks, Fred.

**specialtyretail** · 11-21-2016, 07:59 PM

Quote:

Originally Posted by b.sharp

Do you have the linkage rod that goes from the pedal assembly you have listed to the carb for a V8 truck? I am searching for one to put on a project truck.

Thank you,

I have this. $12.00 shipped if you can use it. Thanks, Fred.

Harris57 · 11-21-2016, 10:13 PM

Quote:

Originally Posted by specialtyretail

SOLD,,,, THANKS.... Glove box button. Works as it should. $7.00 shipped.

Hey Fred, I got my glove box button today.....Thanks

Happy Thanksgiving my friend !!!!!!

**specialtyretail** · 11-22-2016, 10:21 AM

Quote:

Originally Posted by Harris57

Hey Fred, I got my glove box button today.....Thanks

Happy Thanksgiving my friend !!!!!!

Good to hear. Thanks, Fred.

Deer_hunter_088 · 11-22-2016, 10:46 AM

Do you have a financally friendly used grill for a 69?

b.sharp · 11-22-2016, 11:32 AM

Quote:

Originally Posted by specialtyretail

I have this. $12.00 shipped if you can use it. Thanks, Fred.

Fred,

That is the part I am looking for. Do you have a paypal account? I may have to add washers to make it fit the edlebrock carb but at least it's better than the spring the po tried to make work.

**specialtyretail** · 11-23-2016, 02:49 PM

Quote:

Originally Posted by b.sharp

Fred,

That is the part I am looking for. Do you have a paypal account? I may have to add washers to make it fit the edlebrock carb but at least it's better than the spring the po tried to make work.

Did your one of your other truck work for you? Thanks, Fred.

Lowenuf · 11-23-2016, 05:48 PM

The spring cups arrived today... Thank you very much !!!!

**specialtyretail** · 11-23-2016, 06:34 PM

Quote:

Originally Posted by Lowenuf

The spring cups arrived today... Thank you very much !!!!

Good to hear. Thanks, Fred.

b.sharp · 11-27-2016, 07:58 PM

Fred, I have no clue what will work on this 67 truck. Mine from my 70 was twice as long as needed. I don't think the one you have will work either. It has a newer motor in it and an edelbrock carb. I am going to have to make one I think. I appreciate the extra effort but can't use the one you have.

Quote:

Originally Posted by specialtyretail

Did your one of your other truck work for you? Thanks, Fred.

Primer69 · 11-29-2016, 12:16 PM

Would you have front Sway-bar frame brackets

**specialtyretail** · 11-29-2016, 01:32 PM

Quote:

Originally Posted by Primer69

Would you have front Sway-bar frame brackets

Right now, I do not. Thanks, Fred.

11-19-2016, 10:27 AM	#26
Already Gone 70+ ( Old Skool Club ) Join Date: Nov 2003 Location: Saskatoon, Saskatchewan ,Canada Posts: 9,068	Re: Financially friendly pre-owned truck parts... Fred, just wanted to say thank you and that you are a great guy and I'm sure the board members appreciate you taking the time to remove form the trucks, post on here and ship a lot of small parts for $5/$10/$15 where you aren't making anything for your time but helping out the other board members. __________________ 1972 C10 Custom/Deluxe 613 Highlander 406/700R4 1999 White Tahoe LS 4x2 with Z56 Police Package 1992 K1500 GMC Suburban Members I have personally met: MusicMan70 - HeavyD - ChewyChevy67 - StingRay -71SWB4x4 - 67 Burb - DeadheadNM - too much stuff - bc65 - das601 " Circumsatances Do Not Change Responsibility " " The Sky is not the Limit, Your Mind is." Marilyn Monroe .. RIP Charlie Watts 1941 - 2021

11-19-2016, 11:53 AM	#27
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: Financially friendly pre-owned truck parts... i was gona say the same thing, cheers fred! i need the hi beam

11-20-2016, 02:00 PM	#30
54Caddy GM Addicted Join Date: Jan 2009 Location: Visalia, Ca Posts: 2,291	Re: Financially friendly pre-owned truck parts... I'll take the clutch block off __________________ ..Mac’s Garage.. 73 GMC, 54 Caddy, 2010 Silverado, 68 C10 RIP DAd My 73 GMC Truck Build Pic 2010 Silverado 4/6 on 24s IG:MacsGarage

11-20-2016, 07:09 PM	#31
chevypoint Registered User Join Date: May 2011 Location: Hendersonville, nc Posts: 85	Re: Financially friendly pre-owned truck parts... I'll take the tailgate trim, if it's still available? __________________ 71 c20, 350/automatic 71 K5 Blazer, 350 3 speed (really my 16 yr old sons)http://67-72chevytrucks.com/vboard/s...d.php?t=686111 71 GMC build thread; http://67-72chevytrucks.com/vboard/s...d.php?t=468765 47 Chevy Aerosedan, 403 Olds/350 turbo 69 Camaro, 307/powerglide 06 Silverado Z71

11-21-2016, 12:56 PM	#35
b.sharp Registered User Join Date: May 2006 Location: Frankfort, Kentucky Posts: 508	Re: Financially friendly pre-owned truck parts... Do you have the linkage rod that goes from the pedal assembly you have listed to the carb for a V8 truck? I am searching for one to put on a project truck. Thank you,

11-22-2016, 10:46 AM	#40
Deer_hunter_088 Registered User Join Date: Aug 2016 Location: Mount Carmel Illinois Posts: 1,321	Re: Financially friendly pre-owned truck parts... Do you have a financally friendly used grill for a 69? __________________ 1994 k1500, Oldredz71(ext shorty 4x4 6 in lift) 1998 S10ZR2 2005 Silverado 2500hd(tow pig) Made in the USA, just like my trucks

11-23-2016, 05:48 PM	#43
Lowenuf Registered User Join Date: Feb 2016 Location: Washington Court House Ohio Posts: 92	Re: Financially friendly pre-owned truck parts... The spring cups arrived today... Thank you very much !!!!

11-29-2016, 12:16 PM	#46
Primer69 Registered User Join Date: Mar 2013 Location: Washington CH, Ohio Posts: 10	Re: Financially friendly pre-owned truck parts... Would you have front Sway-bar frame brackets



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.