The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-04-2019, 05:18 PM   #1
1967KaiserM715
Registered User
 
1967KaiserM715's Avatar
 
Join Date: Feb 2019
Location: Troy NH
Posts: 54
Dually Lug Nuts/ clamping Ring

I just picked up a set of dual thread lug nuts so I could run the later plastic hubcaps on my 1986 dually. Only issue is I didn't pay attention and did not realize the stock clamping ring used 45 degree taper lug nuts, all the dual thread lug nuts use a 60 degree taper.

I know some of the later 88+ style duallys used the plastic hub caps, but its easier to find lugs for the 14mm thread. I'm not sure if the later clamping rings were 60 or 45 degree though.

Short of converting to 14mm lugs, what other options are there so it would be possible to run the late style hub caps?

I've tried searching, but all I can find is a lot of info on the alloy wheels, nothing that retains the stock steels and clamping ring.
1967KaiserM715 is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:25 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Copyright 1997-2013 67-72chevytrucks.com