What Pickup Parts will work on a Blazer? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

zimmy · 12-28-2005, 11:47 PM

Hey Everyone,

I haven't been around in a while. I just picked up a 72 Chevy Blazer this afternoon. It is a blue and white 4wd.

I need to replace the rockers, floorpans, doors and front part of the rear quarter panel (closest to the doors).

Are the parts I listed interchangable with a 72 pickup? Can the doors be cut or are they "blazer specific". Are the rockers the same? I am assuming that the front lower part of the quarters are specific to the blazer.

If anyone can recommend a vendor to get parts from it would be greatly appreciated. This is for a budget buildup so a used parts source would be fine as well.

Thanks in advance for all your input.

Scott J. Zimmerman

krue · 12-28-2005, 11:53 PM

For used parts you can post a WTB thread on the Parts board. The doors can be cut down truck doors. For the rest I'm waiting for the answers myself.

LUV2XCLR8 · 12-29-2005, 08:11 AM

What Krue said, and here is a link to the Board venders both new and used

http://67-72chevytrucks.com/vboard/a....php?f=15&a=10

**pound41** · 12-29-2005, 08:49 AM

Most all the front floor pan pillar sheetmetal is the same. Only one I have found so far is the outer floor panel patch is too long and has to be altered

**FRENCHBLUE72** · 12-29-2005, 01:25 PM

Everything with the exception of the quarter's can be bought aftermarket,the door can be cut down from a truck.. The quarters could be made from a fleetside truck bed to work with the blazer body... Wes at classic heartbeat has most of the parts in stock usally....www.classicheartbeat.com

12-28-2005, 11:47 PM	#1
zimmy Registered User Join Date: Jan 2004 Location: Austin, TX Posts: 42	What Pickup Parts will work on a Blazer? Hey Everyone, I haven't been around in a while. I just picked up a 72 Chevy Blazer this afternoon. It is a blue and white 4wd. I need to replace the rockers, floorpans, doors and front part of the rear quarter panel (closest to the doors). Are the parts I listed interchangable with a 72 pickup? Can the doors be cut or are they "blazer specific". Are the rockers the same? I am assuming that the front lower part of the quarters are specific to the blazer. If anyone can recommend a vendor to get parts from it would be greatly appreciated. This is for a budget buildup so a used parts source would be fine as well. Thanks in advance for all your input. Scott J. Zimmerman __________________ -Scott-

12-28-2005, 11:53 PM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: What Pickup Parts will work on a Blazer? For used parts you can post a WTB thread on the Parts board. The doors can be cut down truck doors. For the rest I'm waiting for the answers myself. __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

12-29-2005, 08:11 AM	#3
LUV2XCLR8 The LuvShack Garage Join Date: Jan 2004 Location: Maple Grove, TN (West Side) Posts: 30,470	Re: What Pickup Parts will work on a Blazer? What Krue said, and here is a link to the Board venders both new and used http://67-72chevytrucks.com/vboard/a....php?f=15&a=10 __________________ Owner/Op: "TN Classic Transport Carriers" The Toy: "Square Vette" 72 Hybrid Blazer Toy Barn: "LuvShack" 40 x 60 x 20 Shop Big Piggy: "Goliath" 07 Kodiak C4500 Lil Piggy:"Maddy" 88 Silverado 3500 Hauler: "Feathers" 14 Aluma 8218T

12-29-2005, 08:49 AM	#4
pound41 Registered User Join Date: Dec 2002 Location: Northern Virginia Posts: 1,267	Re: What Pickup Parts will work on a Blazer? Most all the front floor pan pillar sheetmetal is the same. Only one I have found so far is the outer floor panel patch is too long and has to be altered

12-29-2005, 01:25 PM	#5
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: What Pickup Parts will work on a Blazer? Everything with the exception of the quarter's can be bought aftermarket,the door can be cut down from a truck.. The quarters could be made from a fleetside truck bed to work with the blazer body... Wes at classic heartbeat has most of the parts in stock usally....www.classicheartbeat.com __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.