Impala SS Rear Disc Brake Brackets

[Wilson!]

Originally Posted by thompson1122

Attachment 1594481

Attachment 1594482

Attachment 1594483

So all I would need to buy is the Impala SS hard lines and the soft lines that connects to the caliper??

if I remember correctly, the line that comes from the hard line on the truck is Impala as well.
Posted via Mobile Device

[thompson1122]

Originally Posted by Wilson!

Imthe phone the pics was on was damaged and I couldn't get any pics off of it. All three soft lines and the two hard lines are from the impala
Posted via Mobile Device

The pics are of my truck rear now. So I remove my hard lines and replace with the Impala SS hard lines where they meet in the center above the housing? Then connect the hard lines to my flex hoses connected to my calipers, correct? Without using any adapters

[thompson1122]

Originally Posted by Wilson!

if I remember correctly, the line that comes from the hard line on the truck is Impala as well.
Posted via Mobile Device

Just want to make sure, are you saying my truck hard lines are the same as the Impala SS hard lines? Or do I get the Impala SS hard lines?

[Wilson!]

Originally Posted by thompson1122

Just want to make sure, are you saying my truck hard lines are the same as the Impala SS hard lines? Or do I get the Impala SS hard lines?

Everything on the rearend is Impala. Both hard lines and all three soft lines.
Posted via Mobile Device

[thompson1122]

Originally Posted by Wilson!

Everything on the rearend is Impala. Both hard lines and all three soft lines.
Posted via Mobile Device

So I do need to get the Impala SS hard lines right?

[thompson1122]

Originally Posted by Wilson!

Everything on the rearend is Impala. Both hard lines and all three soft lines.
Posted via Mobile Device

Sorry to be so nerve racking...So I do need to get the Impala SS hard lines right? Just tell me what all I need to get to do as you did without using the adapters.

[Wilson!]

Originally Posted by thompson1122

Sorry to be so nerve racking...So I do need to get the Impala SS hard lines right? Just tell me what all I need to get to do as you did without using the adapters.

yes the hard lines and hoses are from the impala.
Posted via Mobile Device

[urmyboyblue]

I didn't read this entire thread, but I have a question- do these fit a "big" 12 bolt brake pattern- like used on Impala's? I don't remember if the big pattern is on both trucks and Impalas or if they are different.

[Wilson!]

Originally Posted by urmyboyblue

I didn't read this entire thread, but I have a question- do these fit a "big" 12 bolt brake pattern- like used on Impala's? I don't remember if the big pattern is on both trucks and Impalas or if they are different.

yes, the Impala SS uses the same 5x5 pattern as the truck. The only part that needs modification is the center hole on the rotors is slightly too small and needs opened up
Posted via Mobile Device

[Captainfab]

The truck 12 bolt and the Impala 12 bolt both have the same backing plate bolt pattern. So these brackets will bolt up to a Impala 12 bolt but depending on the year, the wheel stud pattern will be different.

Originally Posted by urmyboyblue

I didn't read this entire thread, but I have a question- do these fit a "big" 12 bolt brake pattern- like used on Impala's? I don't remember if the big pattern is on both trucks and Impalas or if they are different.

[thompson1122]

Originally Posted by Wilson!

yes the hard lines and hoses are from the impala.
Posted via Mobile Device

Mr. Wilson, I meant to ask you where did you get your Impala SS hard lines for the rear?

[thompson1122]

Originally Posted by Wilson!

yes the hard lines and hoses are from the impala.
Posted via Mobile Device

I saw these on ebay..are these like what you have?

[thompson1122]

Finally changed out the rear..ditched the drums and installed the rear disc conversion using Impala SS slotted and drilled rotors, calipers. and the brackets made by captainfab! They fitted perfect!!

[NoNeck]

Hey Captain,

I need a set of your brackets shipped to ZIP 37343 (Tennessee). I need a total.

The way I understand it, I can use '94-'96 Impala SS Calipers, Rotors and Brake Lines for the installation. Correct?

Thanks, POP

[thompson1122]

Yes you must use the calipers, flex hoses, and hard brake lines. I ordered everything off of eBay. Everything was a direct fit.

[Captainfab]

I replied to your PM's........

Originally Posted by NoNeck

Hey Captain,

I need a set of your brackets shipped to ZIP 37343 (Tennessee). I need a total.

The way I understand it, I can use '94-'96 Impala SS Calipers, Rotors and Brake Lines for the installation. Correct?

Thanks, POP

[rubicon03]

Wanted to thank capt fab got the impala disk bracket and the power steering both are excellent and was a breeze to install would post a couple pics but for some reason I can't

[Captainfab]

Thanks for the positive feedback....I appreciate the purchase. If you are trying to post pics direct from your computer or phone, I believe you can not do that because you are not a paid member. You would first have to upload them to a photo hosting site such as photobucket and then post them from there.

Originally Posted by rubicon03

Wanted to thank capt fab got the impala disk bracket and the power steering both are excellent and was a breeze to install would post a couple pics but for some reason I can't

[Daveyc12]

Originally Posted by Captainfab

Here is my latest design of the Impala SS rear disc brake brackets. These are laser cut out of 1/4" with 1/4" spacers stitch welded on and then tapped M12 x 1.25 for the caliper cage attachment bolts. The price on these is $75.00 plus a flat rate shipping of $7.15. PayPal is preferred, but I will also accept money orders. The package includes one pair of brackets plus grade 8 fasteners to attach the brackets to the axle tube flange and the metric bolts to attach the caliper cages to the brackets. This setup is for the 5 x 5 bolt pattern.

If you would like a set, post in this thread and either make a PayPal payment to captainfab454@ hotmail dot com, or send me your email and I can send you a PayPal invoice. If you wish to send a MO contact me for a snail mail address.

I would like a pair of these. Could you send me a paypal invoice? Thanks Cantrell_david@sbcglobal.net

[Captainfab]

PayPal invoice sent and payment received. Thank you for the purchase

Originally Posted by Daveyc12

I would like a pair of these. Could you send me a paypal invoice? Thanks Cantrell_david@sbcglobal.net

[rubicon03]

Ok so what are you guys using for rims? Having a tough time finding any that will fit this setup

[Captainfab]

What wheels are you trying to fit? As far as I knew any 15" or larger disc brake compatible wheel should work.

Originally Posted by rubicon03

Ok so what are you guys using for rims? Having a tough time finding any that will fit this setup

[rubicon03]

Ridler or similar the hub register is to big I guess you have to use a adapter

[Captainfab]

I have heard/read that some of the modern aftermarket wheels have the smaller car sized hub bore. I don't understand why they would offer a wheel with a 5 x 5 pattern and the small hub bore.

[BigHuss88]

Captain ,

Looking to get a pair if you still make those , thanks
Posted via Mobile Device