Anyone Ever Bent Their Trans Dipstick Tub - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**72 Cheyenne K20** · 10-06-2023, 08:12 PM

Hey Guys,

I Have an 80 Jimmy with a 350/350 & replacing the factory under spark plug exhaust manifolds to the earlier rams horn over the spark plug exhaust manifolds. I will be routing the spark plug wires to the back of the block & under the manifolds.

My only issue is getting around / over the transmission dipstick tube. Not sure if they made a different tube on earlier models to go with that setup or bending it is my only option.

Please way in if you have done something like this or have any suggestions.

Thanks Scott

10-06-2023, 08:12 PM	#1
72 Cheyenne K20 Senior Member Join Date: Feb 2003 Location: Staunton, Virginia Posts: 554	Anyone Ever Bent Their Trans Dipstick Tub Hey Guys, I Have an 80 Jimmy with a 350/350 & replacing the factory under spark plug exhaust manifolds to the earlier rams horn over the spark plug exhaust manifolds. I will be routing the spark plug wires to the back of the block & under the manifolds. My only issue is getting around / over the transmission dipstick tube. Not sure if they made a different tube on earlier models to go with that setup or bending it is my only option. Please way in if you have done something like this or have any suggestions. Thanks Scott



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.