''Project '64 SYT Super Yenko Truck" - Page 4 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 05-23-2009, 01:13 AM

That fuel cell mount looks pretty stout. Are you planning on mounting the pump right there? Might be tempting for some people if you know what I mean.

jgh64pkup · 05-23-2009, 03:26 PM

no i dont guess i know what you mean
what do you mean

Alan's Classic · 05-23-2009, 03:41 PM

Nice work

I have a question. Is the tank removeable from the bottom? I can't tell from the pics if your cage is welded or bolted. If you had to service the tank the bed will have to come off. Just thinking ahead.

jgh64pkup · 05-23-2009, 04:00 PM

yes its bolted to the frame you take all of the bolts out
drop the rear down slide the front back and its out
yes that is where the fuel pump is mounted and it should clear the roll pan

jgh64pkup · 05-23-2009, 04:07 PM

here are some pics
maybe theyll help
BTW thanks
what are you using for a tank

Alan's Classic · 05-23-2009, 04:12 PM

**Captainfab** · 05-24-2009, 12:03 AM

Quote:

Originally Posted by jgh64pkup

no i dont guess i know what you mean
what do you mean

What I meant was that someone might help themself to your pump, but it sounds like you'll have it behind a roll pan.

jgh64pkup · 05-24-2009, 10:52 AM

no one around here usually is like that
we left the shop open all night one night and no stole anything

jgh64pkup · 05-25-2009, 09:32 PM

alright what do you think black or sunburst orange on the wheels
these the other rear tires i have for it (besides the et streets)
i painted the little bowtie in the middle of the center cap sunburst orange
i also changed the exhaust tips because i cant fabricate worth a $hit and the old ones didnt match

scotts62 · 05-25-2009, 10:17 PM

Cool! Looking good keep up the good work!

joe231 · 05-25-2009, 10:30 PM

I say go orange on the wheels if you are going to run trim rings, and keep them black if not...
Looking good!

**Captainfab** · 05-26-2009, 12:07 AM

I would say orange wheels with the center cap just like you have it, and trim rings. Orange without trim rings might look good too.....just not sure on that.

jgh64pkup · 05-26-2009, 08:57 AM

Quote:

Originally Posted by joe231

I say go orange on the wheels if you are going to run trim rings, and keep them black if not...
Looking good!

Quote:

Originally Posted by Captainfab

I would say orange wheels with the center cap just like you have it, and trim rings. Orange without trim rings might look good too.....just not sure on that.

thanks
i was thinking no trim rings with the orange do you think it will look better with trim rings
and im keeping the black center caps any way i go with the wheels

joe231 · 05-26-2009, 09:30 AM

I think the trim rings with the orange would just kinda look right...

jgh64pkup · 05-26-2009, 04:14 PM

what style of trim rings

joe231 · 05-26-2009, 05:45 PM

how about some like these?

jgh64pkup · 05-26-2009, 05:57 PM

i have a perfect set(no dings or dents) but they are rusted pretty bad what could i do about that

protrash64 · 05-26-2009, 06:46 PM

Im going to disagree and say the black on the wheels looks tough to me....that burnout vid was lookin' a little scary before it cut out!!!!

jgh64pkup · 05-26-2009, 10:43 PM

DO YOU WANNA SEE ANOTHER ONE!!!!!!
yeah it was scary as hell i got about 4 inches from the wall
ill try again once i get roll control
i tried to tell my dad i needed to put the radials on it
he got it goin pretty good but missed second and it grabed
what kind of roll control should i get i was thinking about a jegs one
its 40 bucks
linky

scotts62 · 05-26-2009, 11:05 PM

Quote:

Originally Posted by jgh64pkup

DO YOU WANNA SEE ANOTHER ONE!!!!!!
yeah it was scary as hell i got about 4 inches from the wall
ill try again once i get roll control
i tried to tell my dad i needed to put the radials on it
he got it goin pretty good but missed second and it grabed
what kind of roll control should i get i was thinking about a jegs one
its 40 bucks
linky

Heck yeah lets see another!!

Buy a good one or you could most definitely be in the wall

jgh64pkup · 05-26-2009, 11:12 PM

[QUOTE=scotts62;

Buy a good one or you could most definitely be in the wall

[/QUOTE]

i think i need some fenderwells too
after the burnouts i was washing the rubber off the cab

protrash64 · 05-27-2009, 05:04 PM

Yeah, put in some fenderwells as you dont want a rock chip in the back window.

Inverter · 05-27-2009, 05:59 PM

Arent electic fuel pumps pushers? If so,that one looks a little high to receive fuel to push on to the front.I guess its working since your driving it,might have problems when the cell is closer to empty. I could also be mistaken,in which case,,,,carry on.

jgh64pkup · 05-27-2009, 10:08 PM

it just has to be close enough to the tank for it to pick up if it is too far away then it will have trouble
i got some bad gas from wal mart so im getting my neighbor to pick me up some race gas

Alan's Classic · 05-27-2009, 11:58 PM

Quote:

Originally Posted by jgh64pkup

it just has to be close enough to the tank for it to pick up if it is too far away then it will have trouble
i got some bad gas from wal mart so im getting my neighbor to pick me up some race gas

I love the smell of race fuel in the morning! Or anytime of the day. That stuff is $10/gal here.

05-23-2009, 01:13 AM	#76
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: my 64 That fuel cell mount looks pretty stout. Are you planning on mounting the pump right there? Might be tempting for some people if you know what I mean. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

05-23-2009, 03:26 PM	#77
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 no i dont guess i know what you mean what do you mean __________________ Gage 1967 C10 Shortbed Stepside

05-23-2009, 03:41 PM	#78
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: my 64 Nice work I have a question. Is the tank removeable from the bottom? I can't tell from the pics if your cage is welded or bolted. If you had to service the tank the bed will have to come off. Just thinking ahead. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

05-23-2009, 04:00 PM	#79
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 yes its bolted to the frame you take all of the bolts out drop the rear down slide the front back and its out yes that is where the fuel pump is mounted and it should clear the roll pan __________________ Gage 1967 C10 Shortbed Stepside

05-23-2009, 04:07 PM	#80
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 here are some pics maybe theyll help BTW thanks what are you using for a tank Attached Images __________________ Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 05-23-2009 at 04:10 PM.

05-23-2009, 04:12 PM	#81
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: my 64 __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

05-24-2009, 10:52 AM	#83
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 no one around here usually is like that we left the shop open all night one night and no stole anything __________________ Gage 1967 C10 Shortbed Stepside

05-25-2009, 09:32 PM	#84
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 alright what do you think black or sunburst orange on the wheels these the other rear tires i have for it (besides the et streets) i painted the little bowtie in the middle of the center cap sunburst orange i also changed the exhaust tips because i cant fabricate worth a $hit and the old ones didnt match Attached Images __________________ Gage 1967 C10 Shortbed Stepside

05-25-2009, 10:17 PM	#85
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: my 64 Cool! Looking good keep up the good work! __________________ Scott 93 crew cab build Project 62

05-25-2009, 10:30 PM	#86
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: my 64 I say go orange on the wheels if you are going to run trim rings, and keep them black if not... Looking good! __________________ *CHEVY ONLY*

05-26-2009, 12:07 AM	#87
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: my 64 I would say orange wheels with the center cap just like you have it, and trim rings. Orange without trim rings might look good too.....just not sure on that. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

05-26-2009, 09:30 AM	#89
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: my 64 I think the trim rings with the orange would just kinda look right... __________________ *CHEVY ONLY*

05-26-2009, 04:14 PM	#90
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 what style of trim rings __________________ Gage 1967 C10 Shortbed Stepside

05-26-2009, 05:45 PM	#91
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: my 64 how about some like these? __________________ *CHEVY ONLY* Last edited by joe231; 05-26-2009 at 05:46 PM.

05-26-2009, 05:57 PM	#92
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 i have a perfect set(no dings or dents) but they are rusted pretty bad what could i do about that __________________ Gage 1967 C10 Shortbed Stepside



Register or Log In To remove these advertisements.

05-26-2009, 06:46 PM	#93
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: my 64 Im going to disagree and say the black on the wheels looks tough to me....that burnout vid was lookin' a little scary before it cut out!!!! __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device Last edited by protrash64; 05-26-2009 at 06:46 PM.

05-26-2009, 10:43 PM	#94
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 DO YOU WANNA SEE ANOTHER ONE!!!!!! yeah it was scary as hell i got about 4 inches from the wall ill try again once i get roll control i tried to tell my dad i needed to put the radials on it he got it goin pretty good but missed second and it grabed what kind of roll control should i get i was thinking about a jegs one its 40 bucks linky __________________ Gage 1967 C10 Shortbed Stepside Last edited by jgh64pkup; 05-26-2009 at 10:44 PM.

05-26-2009, 11:12 PM	#96
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 [QUOTE=scotts62; Buy a good one or you could most definitely be in the wall [/QUOTE] i think i need some fenderwells too after the burnouts i was washing the rubber off the cab __________________ Gage 1967 C10 Shortbed Stepside

05-27-2009, 05:04 PM	#97
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: my 64 Yeah, put in some fenderwells as you dont want a rock chip in the back window. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

05-27-2009, 05:59 PM	#98
Inverter Registered User Join Date: Mar 2007 Location: East Texas Posts: 429	Re: my 64 Arent electic fuel pumps pushers? If so,that one looks a little high to receive fuel to push on to the front.I guess its working since your driving it,might have problems when the cell is closer to empty. I could also be mistaken,in which case,,,,carry on. __________________ TROY My work ~ https://www.67-72chevytrucks.com/vbo...d.php?t=799484

05-27-2009, 10:08 PM	#99
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: my 64 it just has to be close enough to the tank for it to pick up if it is too far away then it will have trouble i got some bad gas from wal mart so im getting my neighbor to pick me up some race gas __________________ Gage 1967 C10 Shortbed Stepside

Register or Log In To remove these advertisements.