250cu. in. with powerglide... which flex plate?

[yote1234]

i am replacing my worn out 292... 3-on tree. with a brand new 250cu.in. crate engine and a fresh powerglide from a 65-66 c10. my question is which flex plate? and converter do i use?
any help ? thx dave

[Clyde65]

https://www.rockauto.com/en/catalog/...,flywheel,5348

[yote1234]

i thank you for your responce, my question is ? is the 230 flexplate the same as 250 flexplate?

[Wrenchbender Ret]

The 230 & 250 use the same flexplate. Use a converter for the power glide & a flex plate to match. The small block v-8s used the same flex plate were it bolts to the engine but I'm not sure if the bolt pattern to the converter will fit.
George

[Clyde65]

Same block 230/350

[vince1]

I think he's looking for a flex plate, not a flywheel.

[yote1234]

Originally Posted by Wrenchbender Ret

The 230 & 250 use the same flexplate. Use a converter for the power glide & a flex plate to match. The small block v-8s used the same flex plate were it bolts to the engine but I'm not sure if the bolt pattern to the converter will fit.
George

awesome . thx dave

Originally Posted by Clyde65

Same block 230/350

i thank you, dave

Originally Posted by vince1

I think he's looking for a flex plate, not a flywheel.

yes ... flex plate... thx dave

[Captainfab]

There are 2 diameters of flexplates for the I6 and V8's. The 153 tooth 12-3/4" and the 168 tooth 14". You will need the correct starter for the diameter of flexplate that you choose.

[rvrfoot]

Some starters will do both flex plates.

[yote1234]

Originally Posted by Captainfab

There are 2 diameters of flexplates for the I6 and V8's. The 153 tooth 12-3/4" and the 168 tooth 14". You will need the correct starter for the diameter of flexplate that you choose.

thx captain....

Originally Posted by rvrfoot

Some starters will do both flex plates.

thank you.