The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > The 1960-1966 Chevrolet & GMC Pickups Parts Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-01-2013, 11:50 PM   #76
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

I'll send you an email


Quote:
Originally Posted by watsontyson View Post
let's try this again with spell check lol watsontyson@hotmail.com
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 09-10-2013, 11:11 AM   #77
clemdaddy
Senior Member
 
clemdaddy's Avatar
 
Join Date: Oct 2009
Location: Fayetteville, Arkansas
Posts: 1,922
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

you're right... that is exactly what i need.

not sure what the difference is in the 2 setups you offer. pm me if you wish...

thanks, clem
clemdaddy is offline   Reply With Quote
Old 09-10-2013, 11:52 PM   #78
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

I'll send you a PM Clem.....

Quote:
Originally Posted by clemdaddy View Post
you're right... that is exactly what i need.

not sure what the difference is in the 2 setups you offer. pm me if you wish...

thanks, clem
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 09-26-2013, 02:06 PM   #79
burbluv
Registered User
 
burbluv's Avatar
 
Join Date: Jan 2011
Location: San Ramon California
Posts: 325
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

Hey Captain,
I have the 62 4wd suburban with the 350 and original 4 on the floor. I am looking to get my drum brakes to work well enough that I can pull an Airstream sometime in the future. I was told by classic performance that this is the booster setup I will need especially since I have the dual reservoir for the hydraulic clutch.
http://www.classicperform.com/Store2.../MT6062BBD.htm
Can you confirm? And if that is what I am looking for is this the adaptor kit that I need to get from you?
Thanks,
AJ
Posted via Mobile Device
burbluv is offline   Reply With Quote
Old 09-26-2013, 10:48 PM   #80
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

That is what CPP came up with to compete with the conversion I make that I am selling in this thread.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 09-26-2013, 10:50 PM   #81
burbluv
Registered User
 
burbluv's Avatar
 
Join Date: Jan 2011
Location: San Ramon California
Posts: 325
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

Oh sorry. I thought it still needed the bracket. Thanks
Posted via Mobile Device
burbluv is offline   Reply With Quote
Old 09-26-2013, 11:24 PM   #82
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

Mine is a direct bolt up to the firewall using existing holes, I do not think theirs is. Typically with CPP's power brake booster conversions, you have to drill the mounting holes in your firewall.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 10-17-2013, 08:17 PM   #83
jmguy
Registered User
 
Join Date: May 2013
Location: ON Canada
Posts: 3
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

hi everyone

have used the captians brackets for my 62 GMC with fliud clutch

and am using a 1987 S10 booster

can anyone tell me if a round brake master cylinder unit from 66 chevy truck will fit on my booster please

it would look a little more original than the crappy S10 and I have no idea how to make the dual set up on the S10 unit work on my one line brake system

comments most welcome thanks
jmguy is offline   Reply With Quote
Old 10-17-2013, 10:45 PM   #84
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

To use your original '66 master cylinder, you will have to change the intermediate pushrod to the long one.

I would recommend upgrading to a dual reservior master cylinder. There is a write up in the '60-'66 FAQ index on how to do it. Then all you will need is a master cylinder for a '70 Buick Estate wagon, which will work with the short intermediate pushrod. Of course this is assuming you still have 4 wheel drum brakes. If you have discs up front, you really should not use the original master cylinder, and you will need a master cylinder and prop valve for a disc/drum braking system.

You do not have to use the S10 master cylinder with the S10 booster. There are many other master cylinders that will work.

Quote:
Originally Posted by jmguy View Post
hi everyone

have used the captians brackets for my 62 GMC with fliud clutch

and am using a 1987 S10 booster

can anyone tell me if a round brake master cylinder unit from 66 chevy truck will fit on my booster please

it would look a little more original than the crappy S10 and I have no idea how to make the dual set up on the S10 unit work on my one line brake system

comments most welcome thanks
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 12-06-2013, 02:16 AM   #85
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

Here is a list of the confirmed compatable boosters.

http://www.67-72chevytrucks.com/vboa...&postcount=183

Of course don't forget about the hydroboost.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 12-10-2013, 02:35 PM   #86
60ShortStepGMC
Registered User
 
60ShortStepGMC's Avatar
 
Join Date: Jun 2013
Location: Sacto, CA
Posts: 43
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

My application is a 60 gmc w/hydraulic clutch, drum/drum. Christmas is near so I'm making a list and checking it twice.

I like your "option 2" but saw some changes in subsequent posts. Just checking the price and product: they remain as you mentioned them in post 43 (199.50 + 15.00 shipping 7.50 powder coat option) and 44 (new linkage)?

<newbie section>
Many places say no proportioning valve required for drum/drum applications, but one would be required because of the new dual diaphragm master cylinder, correct? And no doubt I should replumb all my lines as part of this upgrade?

Generally the improvement gained by this change to my stock truck is power assisted braking and an independent three-line setup (front brakes, rear brakes, clutch)?
</newbie section>
60ShortStepGMC is offline   Reply With Quote
Old 12-10-2013, 08:00 PM   #87
60ShortStepGMC
Registered User
 
60ShortStepGMC's Avatar
 
Join Date: Jun 2013
Location: Sacto, CA
Posts: 43
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

Quote:
Originally Posted by 60ShortStepGMC View Post
Many places say no proportioning valve required for drum/drum applications, but one would be required because of the new dual diaphragm master cylinder, correct?
To answer my own question: No, a proportioning valve is not required for a drum/drum application with dual diaphlegm master cylinder. This thread helped clue me in:
http://67-72chevytrucks.com/vboard/s...=332148&page=4
60ShortStepGMC is offline   Reply With Quote
Old 12-11-2013, 01:46 AM   #88
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

You are close on the price. The bracket with the Wilwood clutch master and linkage is $199.50, the shipping is $15.76, and the satin black powder coating is $7.50, for a total of $222.76. I will need to know what clutch master cylinder you are using, so that I can supply you with the correct size clutch master cylinder.

You are correct that you do not need a proportioning valve for a drum/drum brake system. When converting to a dual reservior master cylinder, you do have to replumb at least the front brake lines. You can reuse the line that runs on the backside of the crossmember, for the rear circuit, by using a couple of inverted flare plugs as needed in the tee's.

If you will be keeping the original clutch slave cylinder, you should be able to keep the original line from the slave up to and including the hose at the firewall. Then just run a new line from the new clutch master, down to the hose on the firewall. Of course this is only if the original line and hose are in good useable condition.

Quote:
Originally Posted by 60ShortStepGMC View Post
My application is a 60 gmc w/hydraulic clutch, drum/drum. Christmas is near so I'm making a list and checking it twice.

I like your "option 2" but saw some changes in subsequent posts. Just checking the price and product: they remain as you mentioned them in post 43 (199.50 + 15.00 shipping 7.50 powder coat option) and 44 (new linkage)?

<newbie section>
Many places say no proportioning valve required for drum/drum applications, but one would be required because of the new dual diaphragm master cylinder, correct? And no doubt I should replumb all my lines as part of this upgrade?

Generally the improvement gained by this change to my stock truck is power assisted braking and an independent three-line setup (front brakes, rear brakes, clutch)?
</newbie section>
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 12-11-2013, 08:52 PM   #89
Weasel235
Registered User
 
Join Date: Nov 2013
Location: Bostic NC
Posts: 6
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

Great product Captianfab.

Install was quick and painless.
__________________
62 GMC LWB Stepside (Project)
95 S-10 350 Conversion
68 Camero
07 Harley Heritage
73 CB 750 Bobber
XS 650 Bobber
Weasel235 is offline   Reply With Quote
Old 12-12-2013, 12:35 AM   #90
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

Thanks for the compliments

Quote:
Originally Posted by Weasel235 View Post
Great product Captianfab.

Install was quick and painless.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 04-20-2014, 10:39 PM   #91
60ShortStepGMC
Registered User
 
60ShortStepGMC's Avatar
 
Join Date: Jun 2013
Location: Sacto, CA
Posts: 43
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

Nice product CaptainFab!
60ShortStepGMC is offline   Reply With Quote
Old 04-21-2014, 01:38 AM   #92
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

Thanks

Quote:
Originally Posted by 60ShortStepGMC View Post
Nice product CaptainFab!
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 08-01-2014, 05:17 PM   #93
J Williams
Registered User
 
J Williams's Avatar
 
Join Date: Jun 2014
Location: Paul idaho
Posts: 263
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

Okay Captainfab, I had talked to you earlier about my 63 C10 NV3500 conversion. So I am ready to get this underway. You show the 60-62 C10 with the vacuum booster and clutch mc bracket along with the Wilwood MC and all needed hardware for 199$ Will this be the same price for the 63 C10? Let me know a price and how you want paid.

Thanks again for your R&D
__________________
63 C10
J Williams is offline   Reply With Quote
Old 08-01-2014, 05:24 PM   #94
J Williams
Registered User
 
J Williams's Avatar
 
Join Date: Jun 2014
Location: Paul idaho
Posts: 263
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

Also I would like to add power steering. Could you give me a package deal with the power steering mounting plate as well? Thanks again
__________________
63 C10
J Williams is offline   Reply With Quote
Old 08-02-2014, 12:08 AM   #95
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

I replied to your PM
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 10-07-2014, 07:55 PM   #96
Peneffer
Registered User
 
Join Date: Oct 2014
Location: Saskatoon, Sk.
Posts: 1
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

Just sent you a quick message. Can't wait.
Peneffer is offline   Reply With Quote
Old 10-07-2014, 10:27 PM   #97
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

I replied to your PM

Quote:
Originally Posted by Peneffer View Post
Just sent you a quick message. Can't wait.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 12-04-2014, 07:57 PM   #98
allisrules
Registered User
 
Join Date: Dec 2014
Location: Central SC
Posts: 1
Thumbs up Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

I like your idea would like to have the option 2 set up for my 1961. Please advise how I could compliant a transaction with you.
allisrules is offline   Reply With Quote
Old 12-05-2014, 01:21 AM   #99
Captainfab
60-66 Nut

 
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,246
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

I replied to your PM

Quote:
Originally Posted by allisrules View Post
I like your idea would like to have the option 2 set up for my 1961. Please advise how I could compliant a transaction with you.
__________________
Power Steering Box Adapter Plates For Sale HERE
Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE
Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE
Hydroboost Mounting Plates HERE
Captainfab is offline   Reply With Quote
Old 04-07-2015, 01:21 AM   #100
SierraMtns
Registered User
 
SierraMtns's Avatar
 
Join Date: Jun 2014
Location: Shingle Springs, CA
Posts: 869
Re: '60-'62 POwer Brake Booster Adapter Bracket With A Clutch

Quote:
Originally Posted by Captainfab View Post
Here are a few pics of the re-design of this kit. The new linkage assembly allows full stroke of the pedal, with plently of adjustment to fine tune it to your liking. Also there is more clearance to the wiring plug on the firewall next to the clutch master cylinder.
Do you have any plans on making a kit that will fit a 67?
SierraMtns is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:33 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com