Rear window weatherstrip p/n

[eric8]

Can anyone provide the gm part number for the rear glass weatherstrip? Wanting to replace mine (I assume the sliding glass window uses the same gasket as the standard glass?) Is there a part number for a gasket that doesn't use the stainless trim or did all trucks have that?

[65chevysub]

I just got an original slider window seal from a friend in Iowa, and the number in the sharp corners is 363110.
I'm guessing that's the original number.
Hope this helps

[65chevysub]

Heres an image of the corner of the window seal.

[eric8]

Thanks! Does that particular one have a groove for the weatherstrip trim?

[65chevysub]

Yes it does. I'll probably get new black locking strip since my truck doesn't have any trim on it.

[65chevysub]

Here is a picture of the channel, and a profile pic of the locking strip. This one is chrome, but I will probably get new in black since my truck has no trim on it.

[65chevysub]

here's a better profile pic

[bhc41051]

I don't think the OEM sliders used the gasket with the locking strip. I don't believe the gasket for the OEM slider is reproduced either.

[65chevysub]

Originally Posted by bhc41051

I don't think the OEM sliders used the gasket with the locking strip. I don't believe the gasket for the OEM slider is reproduced either.

The gasket I got is the original out of an 87. Ive heard there are new gaskets but they dont work on original sliders, only on the new style. I spent over an hour online last week trying to find a gasket for my original slider but there is nothing.

[bhc41051]

Looks like the OEM slider used the same gasket as the base model solid glass.

[65chevysub]

Originally Posted by bhc41051

Looks like the OEM slider used the same gasket as the base model solid glass.

Thanks! That clears up a whole lot. So either gasket can be used. Nice!