2003 LSx swap thread...here we go - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

stevenbear72 · 01-26-2014, 08:08 PM

What kind of headers are those that you are running?

Nice build!

Andy4639 · 01-26-2014, 11:42 PM

Quote:

Originally Posted by stevenbear72

What kind of headers are those that you are running?

Nice build!

Thanks!
Hawks at www.hawksthridgencamaro.com has them made.

Stainless works headers I think is the name he gave me.

http://www.stainlessworks.net/

Andy4639 · 01-26-2014, 11:58 PM

Here are some of the scan gauge. I took these right before I left for work.
Dash lights on.

Scan gauge lite up. I took the ash tray out and just stuck it in the opening for now. I want to try and make it slide in and out if I can. If you have suggestions LMK. I may just use the double sided tape on the front of the ashtray but would rather not.

Everything turned off.

Lee H · 01-27-2014, 10:48 AM

Looking good Andy, I like the steering wheel.

Andy4639 · 01-27-2014, 04:30 PM

Quote:

Originally Posted by Lee H

Looking good Andy, I like the steering wheel.

Thanks,
I wrapped it myself with the leather wrap.

Andy4639 · 01-27-2014, 07:07 PM

Taking the truck Wenesday to the exshaust shop to have 2.5" pipes with Megaflow mufflers installed and dump at the rear of the truck.Then back to Hawks for the final tune and touches.

NastyBuzzard · 01-30-2014, 06:45 PM

Tell Bruce (Hawks 3rd gen owner), Justin said Hey. I'm from Saluda, SC but I've done a decent amount of business with Hawks and he traded me a 99 z28 vert for my Tacoma last year. The Tacoma was his sons Christmas present.

Andy4639 · 01-31-2014, 08:09 PM

Had a little setback yesterday on the truck. Was going to have the exshaut done but truck wouldn't start. Ended up having a fuel pump installed. We had talked about it before and figured it would last a little longer than 4 days!

Oh well new pump in and it's a lot more responsive than it was with the old tpi pump. Glad it happened at the house and not on the road someplace!

amberkalvin · 02-03-2014, 03:52 PM

I love this truck!!!! I have a red C30 I would love to do this swap to. Like you, I work 12 hours a day and don't get home until 8:30 which doesn't leave much time at all to work on anything. Unlike you, I also do not have the $$ to get someone to square it away for me.

Nice truck though man, I really enjoyed this thread and it gave me a little more motivation to do something to my truck....

Andy4639 · 02-03-2014, 06:53 PM

Quote:

Originally Posted by amberkalvin

I love this truck!!!! I have a red C30 I would love to do this swap to. Like you, I work 12 hours a day and don't get home until 8:30 which doesn't leave much time at all to work on anything. Unlike you, I also do not have the $$ to get someone to square it away for me.

Nice truck though man, I really enjoyed this thread and it gave me a little more motivation to do something to my truck....

Thanks it's my baby and nothing is to good for it! I wished I would have done the swap myself but as I stated just didn't have the time and had the extra cash to have it done.

Andy4639 · 02-03-2014, 08:56 PM

Got the dauls and Mega Flows installed today!

amberkalvin · 02-04-2014, 09:57 AM

Quote:

Originally Posted by Andy4639

Got the dauls and Mega Flows installed today!

I guess the only appropriate response would be:

Lets see some pics and maybe a vid!!!

Andy4639 · 02-04-2014, 06:31 PM

I took a better video but it's taking for ever to load on You Tube. I'll link it as soon as it finishes. Here are some pictures I just took.It was cool outside when the video was done and the truck was cold crank.

Andy4639 · 02-05-2014, 04:51 PM

Here is clip for you. Fiing to head back to Hawks the fnal time I hope. They are doing the final tune Friday.

New exhaust - YouTube

Andy4639 · 02-06-2014, 02:47 PM

Truck is at Hawks getting the AC swapped out and the final tune. Should pick it up tomorrow I hope.
I sure hope they don't blow it up tunning it!

Andy4639 · 02-07-2014, 08:22 PM

Well now that the swap is done I can start saving up for mods. What would be the first mod you guy's would do?

Cam
Rollers

Supercharger... not for a while. I want to live long enough to enjoy the truck... the wife would kill me! Lol...Maybe in a couple of years she will forget how much this cost!

Houston Ben · 02-12-2014, 11:05 PM

Shhhh....that's my plan as well!

Andy4639 · 02-12-2014, 11:32 PM

Quote:

Originally Posted by Houston Ben

Shhhh....that's my plan as well!

Mum's the word for now! Lol...

Andy4639 · 02-15-2014, 08:38 PM

I got the new rotors on the front!

uxdesigner · 02-27-2014, 08:45 PM

Exhaust sounds awesome! Really like how they exit also. Great pics keep them coming.

It appears as though you have the stock engine mounts. What did you use to mate the engine to the stock mounts?

Andy4639 · 02-27-2014, 10:04 PM

Quote:

Originally Posted by uxdesigner

Exhaust sounds awesome! Really like how they exit also. Great pics keep them coming.

It appears as though you have the stock engine mounts. What did you use to mate the engine to the stock mounts?

Thanks,
The mounts were in the motor package I got. Then Hawks used there mounts to the frame which are pretty much just GM motor mounts.

Houston Ben · 04-09-2014, 08:37 AM

Andy, where did you get your flex tube on your intake from? I am going to be adding a high mount ac from DD and my stock air intake one will not fit once the DD is added. I need an alternative and yours looks like it will work.

thanks!

Andy4639 · 04-09-2014, 07:04 PM

Quote:

Originally Posted by Houston Ben

Andy, where did you get your flex tube on your intake from? I am going to be adding a high mount ac from DD and my stock air intake one will not fit once the DD is added. I need an alternative and yours looks like it will work.

thanks!

I ordered it off line some place I think are maybe from O-rielly's. It's been so long ago I have no idea where though...sorry!

01-26-2014, 08:08 PM	#101
stevenbear72 Registered User Join Date: May 2013 Location: San Antonio, Texas Posts: 104	Re: 2003 LSx swap thread...here we go What kind of headers are those that you are running? Nice build! __________________ 68' Cst10 w/69 front, 5.3/4L60e swap, 12 bolt 4.11's Project "Huckleberry" 68 GMC K1500 1/2 ton L83/6L80e

01-26-2014, 11:58 PM	#103
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: 2003 LSx swap thread...here we go Here are some of the scan gauge. I took these right before I left for work. Dash lights on. Scan gauge lite up. I took the ash tray out and just stuck it in the opening for now. I want to try and make it slide in and out if I can. If you have suggestions LMK. I may just use the double sided tape on the front of the ashtray but would rather not. Everything turned off. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-27-2014, 10:48 AM	#104
Lee H Registered User Join Date: Jun 2010 Location: Upland Ca Posts: 4,139	Re: 2003 LSx swap thread...here we go Looking good Andy, I like the steering wheel. __________________ 1972 C10 SWB, Air, PS, PB, 350/350THM. Second owner. 1965 Corvette roadster, 44K miles, 327/365 SHP, 4 speed, side exhaust, knockoffs, teak, second owner (bought in 1970), Have ALL numbers matching components. My frame off restoration thread: http://67-72chevytrucks.com/vboard/s...d.php?t=556703

01-27-2014, 07:07 PM	#106
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: 2003 LSx swap thread...here we go Taking the truck Wenesday to the exshaust shop to have 2.5" pipes with Megaflow mufflers installed and dump at the rear of the truck.Then back to Hawks for the final tune and touches. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

01-30-2014, 06:45 PM	#107
NastyBuzzard Registered User Join Date: Oct 2013 Location: Saluda, SC Posts: 1,275	Re: 2003 LSx swap thread...here we go Tell Bruce (Hawks 3rd gen owner), Justin said Hey. I'm from Saluda, SC but I've done a decent amount of business with Hawks and he traded me a 99 z28 vert for my Tacoma last year. The Tacoma was his sons Christmas present.

01-31-2014, 08:09 PM	#108
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: 2003 LSx swap thread...here we go Had a little setback yesterday on the truck. Was going to have the exshaut done but truck wouldn't start. Ended up having a fuel pump installed. We had talked about it before and figured it would last a little longer than 4 days! Oh well new pump in and it's a lot more responsive than it was with the old tpi pump. Glad it happened at the house and not on the road someplace! Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-03-2014, 03:52 PM	#109
amberkalvin Registered User Join Date: Jul 2013 Location: fayetteville, nc Posts: 136	Re: 2003 LSx swap thread...here we go I love this truck!!!! I have a red C30 I would love to do this swap to. Like you, I work 12 hours a day and don't get home until 8:30 which doesn't leave much time at all to work on anything. Unlike you, I also do not have the $$ to get someone to square it away for me. Nice truck though man, I really enjoyed this thread and it gave me a little more motivation to do something to my truck.... __________________ 1984 SWB C10 (http://67-72chevytrucks.com/vboard/s...d.php?t=687521) 1976 K5 super rusty fitech truck(http://67-72chevytrucks.com/vboard/s...d.php?t=740582) The one I'm keeping forever (Fingers crossed!) 1989 Suburban 2500 L83 6L80 (https://67-72chevytrucks.com/vboard/...d.php?t=818822)

02-03-2014, 08:56 PM	#111
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: 2003 LSx swap thread...here we go Got the dauls and Mega Flows installed today! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-04-2014, 06:31 PM	#113
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: 2003 LSx swap thread...here we go I took a better video but it's taking for ever to load on You Tube. I'll link it as soon as it finishes. Here are some pictures I just took.It was cool outside when the video was done and the truck was cold crank. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-06-2014, 02:47 PM	#115
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: 2003 LSx swap thread...here we go Truck is at Hawks getting the AC swapped out and the final tune. Should pick it up tomorrow I hope. I sure hope they don't blow it up tunning it! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-07-2014, 08:22 PM	#116
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: 2003 LSx swap thread...here we go Well now that the swap is done I can start saving up for mods. What would be the first mod you guy's would do? Cam Rollers Supercharger... not for a while. I want to live long enough to enjoy the truck... the wife would kill me! Lol...Maybe in a couple of years she will forget how much this cost! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-12-2014, 11:05 PM	#117
Houston Ben Registered User Join Date: May 2013 Location: Houston Texas Posts: 713	Re: 2003 LSx swap thread...here we go Shhhh....that's my plan as well!

02-15-2014, 08:38 PM	#119
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: 2003 LSx swap thread...here we go I got the new rotors on the front! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.

02-27-2014, 08:45 PM	#120
uxdesigner Registered User Join Date: Nov 2013 Location: Rocklin, CA Posts: 204	Re: 2003 LSx swap thread...here we go Exhaust sounds awesome! Really like how they exit also. Great pics keep them coming. It appears as though you have the stock engine mounts. What did you use to mate the engine to the stock mounts? __________________ UXDesigner's 1970 5.3 Chevy Swap UXDesigner's 1967 C10 - The Keeper

04-09-2014, 08:37 AM	#122
Houston Ben Registered User Join Date: May 2013 Location: Houston Texas Posts: 713	Re: 2003 LSx swap thread...here we go Andy, where did you get your flex tube on your intake from? I am going to be adding a high mount ac from DD and my stock air intake one will not fit once the DD is added. I need an alternative and yours looks like it will work. thanks!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.