Radiator support information needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Thealien · 11-16-2020, 11:48 AM

I plan on putting a 1968 front clip on my 1972 Blazer.

I may have found a set of 1968 fenders and hood. I know I need a new latch and center grill support.

Will my radiator support I have work with the 1968 hood and fenders? Anything else I should try to find?

Thanks
Mark

flashed · 11-16-2020, 10:14 PM

You will need the 67/8 core support .

Thealien · 11-17-2020, 06:01 AM

Quote:

Originally Posted by flashed

You will need the 67/8 core support .

Could you explain the differences please.

flashed · 11-17-2020, 09:45 AM

Quote:

Originally Posted by Thealien

Could you explain the differences please.

I’m pretty sure the fender mounting points are different for one thing . The complete radiator core support from a 67/8 is completely different from a 69 up core support . I’m pretty sure both hood latches mount differently too .
Posted via Mobile Device

**Ol Blue K20** · 11-17-2020, 10:11 AM

Headlight buckets in a different location too. I seem to remember someone modifying on to fit. I think it's a lot easier to get the right one.

**LockDoc** · 11-17-2020, 10:20 AM

-
If you type "67-68 core support differences" (without the quotes) into the Google search box at the top of this page, click on the circle in front of "67-72chevytrucks.com" and click on the Google button there are a lot of threads about the subject.

LockDoc

Thealien · 11-17-2020, 10:43 AM

Quote:

Originally Posted by LockDoc

-
If you type "67-68 core support differences" (without the quotes) into the Google search box at the top of this page, click on the circle in front of "67-72chevytrucks.com" and click on the Google button there are a lot of threads about the subject.

LockDoc

And I spent an hour or more yesterday after doing that search and still did not find any answers. I could have sworn I read about some using one or the other? Just don't want to search for a radiator support if I can find a way to use mine?

I DID NOT use the exact wording you did. Finding more information, thanks.

Thanks

**LockDoc** · 11-17-2020, 11:20 AM

Quote:

Originally Posted by Thealien

And I spent an hour or more yesterday after doing that search and still did not find any answers. I could have sworn I read about some using one or the other? Just don't want to search for a radiator support if I can find a way to use mine?

I DID NOT use the exact wording you did. Finding more information, thanks.

Thanks

Good deal. Yes, the wording can make a lot of difference.

LockDoc

Bigdav160 · 11-17-2020, 04:48 PM

Quote:

Originally Posted by Thealien

Could you explain the differences please.

is this the thread?

pwdcougar · 11-19-2020, 11:37 AM

I think there is also a different in the amount of washers at the bottom attaching point too. One sits lower than the other.

Paul
Posted via Mobile Device

11-16-2020, 11:48 AM	#1
Thealien Senior Member Join Date: Jun 2007 Location: Pine Ridge Florida Posts: 4,126	Radiator support information needed I plan on putting a 1968 front clip on my 1972 Blazer. I may have found a set of 1968 fenders and hood. I know I need a new latch and center grill support. Will my radiator support I have work with the 1968 hood and fenders? Anything else I should try to find? Thanks Mark __________________ Click on my Not really a build thread, yet NOT SO RUST FREE RUST FREE BLAZER LS ENGINE SWAP INFORMATION THREAD BOLT RESTORATIONS 4l60 to an NP205

11-16-2020, 10:14 PM	#2
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,729	Re: Radiator support information needed You will need the 67/8 core support .

11-17-2020, 10:11 AM	#5
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: Radiator support information needed Headlight buckets in a different location too. I seem to remember someone modifying on to fit. I think it's a lot easier to get the right one. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

11-17-2020, 10:20 AM	#6
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,321	Re: Radiator support information needed - If you type "67-68 core support differences" (without the quotes) into the Google search box at the top of this page, click on the circle in front of "67-72chevytrucks.com" and click on the Google button there are a lot of threads about the subject. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

11-19-2020, 11:37 AM	#10
pwdcougar Registered User Join Date: Oct 2013 Location: New Jersey Posts: 1,302	Re: Radiator support information needed I think there is also a different in the amount of washers at the bottom attaching point too. One sits lower than the other. Paul Posted via Mobile Device



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.