The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-09-2012, 02:20 AM   #51
tallic68
Active Member
 
Join Date: Jan 2011
Location: Buckeye A.Z.
Posts: 116
Re: LS factory cruise control hook up

Dose anyone know where I can get one of these? I've searched every pick-a-part in the area and nothing. I found the right year/ model w/cc but all levers were gone. I've got a later style modified with a single screw mount but I'm not happy with the look. To bulky.
Posted via Mobile Device
tallic68 is offline   Reply With Quote
Old 11-09-2012, 04:07 AM   #52
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

Quote:
Originally Posted by tallic68 View Post
Dose anyone know where I can get one of these? I've searched every pick-a-part in the area and nothing. I found the right year/ model w/cc but all levers were gone. I've got a later style modified with a single screw mount but I'm not happy with the look. To bulky.
Posted via Mobile Device
If it's looks you're after, I have what you're looking for if you have a.67-72. I have a few "hybrid" levers that I've made from different parts that match the turn signal levers on 67-72's. They have the grooves in them. Or i have the newer looking ones tht are smooth. I can post some pics later today.
Posted via Mobile Device
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 11-09-2012, 05:26 PM   #53
tallic68
Active Member
 
Join Date: Jan 2011
Location: Buckeye A.Z.
Posts: 116
Re: LS factory cruise control hook up

Sounds good.
Posted via Mobile Device
tallic68 is offline   Reply With Quote
Old 11-09-2012, 08:39 PM   #54
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

I almost forgot about the pics, and I don't have alot of time right now, so I couldn't find the good pics, but here's one of them on my truck. I have the ribbed kind and the smooth kind, both these pics are the ribbed. The smooth are $45 shipped and the ribbed are $50 shipped.
Attached Images
  
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 11-10-2012, 11:17 AM   #55
Daaaanz67
Registered User
 
Join Date: Nov 2011
Location: Idaho
Posts: 857
Re: LS factory cruise control hook up

Are these compatible with ls dbw also are the ribbed one the period correct for the 67/72
Posted via Mobile Device
Daaaanz67 is offline   Reply With Quote
Old 11-10-2012, 12:52 PM   #56
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

Quote:
Originally Posted by Daaaanz67 View Post
Are these compatible with ls dbw also are the ribbed one the period correct for the 67/72
Posted via Mobile Device
They work for the gen 3 engines, the gen4 are harder to get cruise to work on. Also... they're not period correct, they just look a little more correct, especially if you have a tilt since they match the tilt lever.
Posted via Mobile Device
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 11-10-2012, 07:26 PM   #57
Daaaanz67
Registered User
 
Join Date: Nov 2011
Location: Idaho
Posts: 857
Re: LS factory cruise control hook up

My drive train came out of 06 Tahoe dbw will this work
Posted via Mobile Device
Daaaanz67 is offline   Reply With Quote
Old 11-10-2012, 08:25 PM   #58
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

Quote:
Originally Posted by Daaaanz67 View Post
My drive train came out of 06 Tahoe dbw will this work
Posted via Mobile Device
Yes it will, the engine in my orange truck is an '06 as well.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 11-10-2012, 10:23 PM   #59
Daaaanz67
Registered User
 
Join Date: Nov 2011
Location: Idaho
Posts: 857
Re: LS factory cruise control hook up

I'll take one of your best ribbed one I'll pm you.
Posted via Mobile Device
Daaaanz67 is offline   Reply With Quote
Old 11-10-2012, 11:21 PM   #60
cjohnson6772
Registered User
 
cjohnson6772's Avatar
 
Join Date: Dec 2010
Location: NC
Posts: 666
Re: LS factory cruise control hook up

Is there anyway to fish this down through the column without taking it all apart? Factory tilt. Also, any chance we can get a pic of where the wiring comes out of the lever?
Posted via Mobile Device
cjohnson6772 is offline   Reply With Quote
Old 11-11-2012, 08:25 AM   #61
mcmlxix
Collector of Projects
 
mcmlxix's Avatar
 
Join Date: Apr 2003
Location: Las Vegas
Posts: 3,106
Re: LS factory cruise control hook up

Quote:
Originally Posted by cjohnson6772 View Post
Is there anyway to fish this down through the column without taking it all apart? Factory tilt. Also, any chance we can get a pic of where the wiring comes out of the lever?
Posted via Mobile Device
The cable from the stalk is flat and should be able to fit... with a little finess...
__________________
Rich
1972 K5 Blazer CST Click HERE

D60 BIG BRAKE UPGRADE Click HERE
mcmlxix is offline   Reply With Quote
Old 11-11-2012, 10:41 AM   #62
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,821
Re: LS factory cruise control hook up

Great information! I've got two trucks I have to do this to....
Posted via Mobile Device
Hart_Rod is online now   Reply With Quote
Old 11-12-2012, 10:53 AM   #63
Daaaanz67
Registered User
 
Join Date: Nov 2011
Location: Idaho
Posts: 857
Re: LS factory cruise control hook up

Ls1 nova did you get my pm
Posted via Mobile Device
Daaaanz67 is offline   Reply With Quote
Old 11-12-2012, 11:18 AM   #64
ms2335
Senior Member
 
ms2335's Avatar
 
Join Date: Jan 2009
Location: glenmora. la
Posts: 290
Re: LS factory cruise control hook up

I will take a smooth one if you have any left. PM me Paypal info
Posted via Mobile Device
__________________
65 Chevy C10 Short Fleet BBW 6.0L/4l80E
68 Chevy C10 SWB 6.0L/4L80E
84 Chevy C10 SWB 5.3/4l60E QA1 Suspension
ms2335 is offline   Reply With Quote
Old 11-12-2012, 12:14 PM   #65
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

Quote:
Originally Posted by Daaaanz67 View Post
Ls1 nova did you get my pm
Posted via Mobile Device
Just got it, PM sent.

Quote:
Originally Posted by ms2335 View Post
I will take a smooth one if you have any left. PM me Paypal info
Posted via Mobile Device
I don't have anymore ready to go at the moment, but will in a few weeks. If you're not in a hurry I can let you know when they're done
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 11-12-2012, 12:24 PM   #66
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

Quote:
Originally Posted by cjohnson6772 View Post
Is there anyway to fish this down through the column without taking it all apart? Factory tilt. Also, any chance we can get a pic of where the wiring comes out of the lever?
Posted via Mobile Device
You would need to pull the turn signal switch out, well, not all the way out, but take the three screws out move the switch out of the way, put the column in the straight position, take the little wire cover that goes between the shift bowl and the dash off, then you can fish the wire down it fairly easily. The wires on the cruise switches are pretty rigid, so it's not all that hard.

Here's the pic of where the wires come out of the lever.
Attached Images
 
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 11-12-2012, 12:55 PM   #67
ms2335
Senior Member
 
ms2335's Avatar
 
Join Date: Jan 2009
Location: glenmora. la
Posts: 290
Re: LS factory cruise control hook up

Quote:
Originally Posted by ls1nova71 View Post
Just got it, PM sent.



I don't have anymore ready to go at the moment, but will in a few weeks. If you're not in a hurry I can let you know when they're done
Thanks! That is fine just put me in line.
Posted via Mobile Device
__________________
65 Chevy C10 Short Fleet BBW 6.0L/4l80E
68 Chevy C10 SWB 6.0L/4L80E
84 Chevy C10 SWB 5.3/4l60E QA1 Suspension
ms2335 is offline   Reply With Quote
Old 11-12-2012, 02:14 PM   #68
Clyde65
1965 Chevy C10, 2005 4.8L/4l60
 
Clyde65's Avatar
 
Join Date: Aug 2004
Location: DFW Texas
Posts: 8,539
Re: LS factory cruise control hook up

Ls1nova71 helped me get my cruise up and running perfectly with the stalk, connectors, brakes switch and all the diagrams to get it working, very helpful guy! I can't say that enough.
Posted via Mobile Device
__________________
Clyde65

Rebuild of Clyde
http://67-72chevytrucks.com/vboard/s...84#post8338184

69 Aristocrat Lo Liner build
http://67-72chevytrucks.com/vboard/s...84#post7561684



support our troops!
Clyde65 is offline   Reply With Quote
Old 11-12-2012, 02:15 PM   #69
aggie91
I'm just glad to be here!
 
aggie91's Avatar
 
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
Re: LS factory cruise control hook up

Great thread. I sent you a PM about a lever also....
__________________
Karl



1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues)
http://67-72chevytrucks.com/vboard/s...d.php?t=372424

The LST Challenge:
http://67-72chevytrucks.com/vboard/s...=1#post7812257

Korbin's 1st Square: "Sunburn"
http://67-72chevytrucks.com/vboard/s...d.php?t=418618

1985 GMC Sierra: "White Trash", Korbin's 2nd now...
http://67-72chevytrucks.com/vboard/s...d.php?t=632305

Henry - 1984 Chevrolet, Owen's 1st Square
aggie91 is offline   Reply With Quote
Old 11-13-2012, 02:16 AM   #70
Daaaanz67
Registered User
 
Join Date: Nov 2011
Location: Idaho
Posts: 857
Re: LS factory cruise control hook up

Payment sent for ribbed one
Posted via Mobile Device
Daaaanz67 is offline   Reply With Quote
Old 11-25-2012, 02:50 AM   #71
Daaaanz67
Registered User
 
Join Date: Nov 2011
Location: Idaho
Posts: 857
Re: LS factory cruise control hook up

Just got back in town and got the package man that lever looks brand new money well spent thanks. Just got to get it hooked up thanks for labeling the wires also.
Posted via Mobile Device
Daaaanz67 is offline   Reply With Quote
Old 11-30-2012, 05:00 PM   #72
Dads Burb
Registered User
 
Join Date: Nov 2011
Location: Bothell, WA
Posts: 63
Re: LS factory cruise control hook up

Does the column have to be from a truck? I have 2 columns I would like to do this on. One is from an 80's Buick or Olds with the key in the column and the big bulge and bulky looking cruise lever on it. The other is from an earlier Buick. It also has the key in the column, but it has the older style column look and the cruise lever just has a button on the end (I guess to turn it on) and I think it only has one wire coming from it.

My engine and harness is from a 2004 Tahoe (flex-fuel) with 4L60E trans.

I would really like to use the older style column, but I want the cruise functions of the newer column. Would one of your levers work for me in this column?

I hope this made sense.
Dads Burb is offline   Reply With Quote
Old 11-30-2012, 05:49 PM   #73
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LS factory cruise control hook up

Quote:
Originally Posted by Dads Burb View Post
Does the column have to be from a truck? I have 2 columns I would like to do this on. One is from an 80's Buick or Olds with the key in the column and the big bulge and bulky looking cruise lever on it. The other is from an earlier Buick. It also has the key in the column, but it has the older style column look and the cruise lever just has a button on the end (I guess to turn it on) and I think it only has one wire coming from it.

My engine and harness is from a 2004 Tahoe (flex-fuel) with 4L60E trans.

I would really like to use the older style column, but I want the cruise functions of the newer column. Would one of your levers work for me in this column?

I hope this made sense.
There are different styles of levers. The int you say is bulky, does it have four wires? If so it will work. If it doesn't have windshield wipers in it, its probably a 3 wire, but you can swap the switch inside the lever out with a newer switch. The older column with the single button can be made to work, but you would have to wire the cruise to be on at all times when the ignition is on, and you would only have the set/coast feature, no resume/accell. If you want all the features to work you would need a newer switch like the ones I have. I have the kind that screw in with a single screw, like your older column, and also the push in type for columns without wipers built in.
Posted via Mobile Device
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html
ls1nova71 is offline   Reply With Quote
Old 11-30-2012, 05:57 PM   #74
Dads Burb
Registered User
 
Join Date: Nov 2011
Location: Bothell, WA
Posts: 63
Re: LS factory cruise control hook up

Thanks for fast reply. The newer column doesn't have the wiper controls. I need to look at it closer and see if it has all the cruise functions and how many wires it has. I know the older column only says Cruise with 1 button at the end.

The older column is the one I would like to use. I will check them and get back to you.
Dads Burb is offline   Reply With Quote
Old 01-02-2013, 03:25 PM   #75
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,821
Re: LS factory cruise control hook up

I have a HND-3 from Dakota Digitial.

http://www.dakotadigital.com/index.c...prod/prd50.htm

How will it work with a 2006 DBW? I installed the handle on a Flaming River tilt column and it was a PITA to get the wires pulled through....
Hart_Rod is online now   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 12:04 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com