The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board > Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 09-24-2014, 04:50 PM   #76
FarmerSid
Registered User
 
FarmerSid's Avatar
 
Join Date: Jan 2012
Location: Eastern Ontario, Canada
Posts: 1,041
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Thanks AD. Power vent would be cool. I think I will leave the vent for now and continue on with the cab repair. One thing I have noticed is that the hood hits the curved portion of the outer cowl when I close the hood. It prevents the hood from sitting flush up top with the cab. Either I welded the outer cowl in too high or the cowl shape is off. I may have to pie cut the hood a bit.

Any other idea's to correct this?
__________________
1952 Canadian Chevy 1300
C4 IFS & D44 IRS
5.3 HO L33

My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938
FarmerSid is offline   Reply With Quote
Old 10-01-2014, 05:51 PM   #77
FarmerSid
Registered User
 
FarmerSid's Avatar
 
Join Date: Jan 2012
Location: Eastern Ontario, Canada
Posts: 1,041
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Wondering if you all would mind sharing some idea's on a cab dolly. Ready to pull the cab and would like some idea's from those that have built one. I have some 6" casters to use. Now I can finally start working on the frame. Kinda excited about getting the Corvette suspension installed. Still have some cab work to do but I think I need to move onto something else for a bit.
__________________
1952 Canadian Chevy 1300
C4 IFS & D44 IRS
5.3 HO L33

My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938
FarmerSid is offline   Reply With Quote
Old 10-01-2014, 07:38 PM   #78
47 Fasttoys
Registered User
 
47 Fasttoys's Avatar
 
Join Date: Sep 2013
Location: Westminster, SC
Posts: 933
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Morning Farmer,
This is what I built. It's 1 1/2 "and 2" square tubing and angle. The front is bolted using the original cab mounting holes with the rear just resting on the area near the rear seat mounting area. For mine I set the cab at final ride height.



Rob
__________________
My '47 C.O.E build
47 Fasttoys is offline   Reply With Quote
Old 10-01-2014, 08:14 PM   #79
FarmerSid
Registered User
 
FarmerSid's Avatar
 
Join Date: Jan 2012
Location: Eastern Ontario, Canada
Posts: 1,041
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Looks good Rob! It's still night here. LOL! Looks simple enough. Since I last posted, I got to thinking that it might be nice to be able to flip the cab on it's back without damaging the new rear panel and still be able to get it back in it's normal position. I gotta be able to roll it out of the shop and on a gravel drive way for blasting and painting.
__________________
1952 Canadian Chevy 1300
C4 IFS & D44 IRS
5.3 HO L33

My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938
FarmerSid is offline   Reply With Quote
Old 10-01-2014, 08:52 PM   #80
BIGglaSS
Registered User
 
BIGglaSS's Avatar
 
Join Date: May 2014
Location: ID
Posts: 663
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Another member here sells plans for a 55-59 dolly. I keep thinking about doing this, but would need a place to store it.
http://67-72chevytrucks.com/vboard/s...d.php?t=203593
BIGglaSS is offline   Reply With Quote
Old 10-01-2014, 09:10 PM   #81
rgunlock
Senior Member
 
rgunlock's Avatar
 
Join Date: Jul 2009
Location: Tomball, Texas
Posts: 1,589
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Member dwcsr built a really nice cab dolly in one of his recent build threads. He could tilt the cab and had lock-downs to keep it from rolling when he didn't want it to. Starts on post 16 here:
http://67-72chevytrucks.com/vboard/s...d.php?t=569491
__________________
Rick

78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel
71 GMC C25 350/TH400 - Project Angie
59 Chevy SWB Stepside (next in line? Not sure now )
2001 GMC Sierra K2500
rgunlock is offline   Reply With Quote
Old 10-02-2014, 08:54 AM   #82
b.sharp
Registered User
 
b.sharp's Avatar
 
Join Date: May 2006
Location: Frankfort, Kentucky
Posts: 508
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Cab vent. In my '37 GMC if the windows are down I get a little air but if I open the vent it's like a wind tunnel. It's much nicer and more comfortable with the vent open. I do not have any carpet or insulation on the floor or roof. It is hot in the summer time but driving with the vent makes it bareable and cools off quick. I would think with a good seal you wouldn't have to worry about leaks. Just my .02 worth!! Keep at it man, the progress is looking great.
b.sharp is offline   Reply With Quote
Old 10-02-2014, 09:51 AM   #83
FarmerSid
Registered User
 
FarmerSid's Avatar
 
Join Date: Jan 2012
Location: Eastern Ontario, Canada
Posts: 1,041
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Thanks for the dolly links guy's. Sure gives some idea's. Thanks sharp I think I'm gonna leave mine for now.
__________________
1952 Canadian Chevy 1300
C4 IFS & D44 IRS
5.3 HO L33

My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938
FarmerSid is offline   Reply With Quote
Old 10-02-2014, 06:39 PM   #84
FarmerSid
Registered User
 
FarmerSid's Avatar
 
Join Date: Jan 2012
Location: Eastern Ontario, Canada
Posts: 1,041
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Got my dolly made. Nothing fancy. Made it out of 2X4's and some casters I had. Camera's dead and Photobucket is being a pain.
__________________
1952 Canadian Chevy 1300
C4 IFS & D44 IRS
5.3 HO L33

My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938
FarmerSid is offline   Reply With Quote
Old 10-04-2014, 07:06 PM   #85
FarmerSid
Registered User
 
FarmerSid's Avatar
 
Join Date: Jan 2012
Location: Eastern Ontario, Canada
Posts: 1,041
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Some great progress today after hockey. Glad to be off the cab work for a bit. Got the cab off the frame and on the dolly. Started working on the frame. Are these six holes needed in the front of the front cross member? I want to fill them if they are not needed.





Here's my crew doing all the work!




Should have a good day's work tomorrow and will update Monday. Have a good weekend all!
__________________
1952 Canadian Chevy 1300
C4 IFS & D44 IRS
5.3 HO L33

My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938
FarmerSid is offline   Reply With Quote
Old 10-05-2014, 10:52 AM   #86
99 to Life
Registered User
 
99 to Life's Avatar
 
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Sid, I know I'v seen some of these pics bf. Not sure how I didn't reply to your thread. Great work and great attention to detail. I like seeing patch work really.

You asked about what holes to fill in the frame. I honestly can't give you a good answer on that. I'd box in the front and rear and call it a day. wait till you get your suspension on and if there are any big holes buggin you, fill them.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481

49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA

Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162

52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame

Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!


www.coffeeandcustoms.com
99 to Life is offline   Reply With Quote
Old 10-05-2014, 11:17 AM   #87
oldman3
Senior Member
 
oldman3's Avatar
 
Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,549
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Sid, I just checked by front crossmember on mine and I didn't use the 6 small holes, don't know what they were used for, or why they are there....Jim
oldman3 is offline   Reply With Quote
Old 10-05-2014, 12:51 PM   #88
FarmerSid
Registered User
 
FarmerSid's Avatar
 
Join Date: Jan 2012
Location: Eastern Ontario, Canada
Posts: 1,041
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Thanks 99. Sorry for buggin ya as I did know you use S10 frames.

Jim, Thanks for looking for me. I will hold off a bit filling in those holes and see if others comment on what these holes are for.

Now back out and continue welding nuts on the inside of the frame for cab mounts, running boards etc. as I won't be able to get nuts inside the frame after it's boxed.

Is there anything I'm forgetting to do inside the frame before I box it up?
__________________
1952 Canadian Chevy 1300
C4 IFS & D44 IRS
5.3 HO L33

My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938
FarmerSid is offline   Reply With Quote
Old 10-05-2014, 07:16 PM   #89
Advanced Design
Senior Member
 
Advanced Design's Avatar
 
Join Date: Jul 2012
Location: Oblong, Illinois
Posts: 7,014
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Hi Sid, I checked my Uncles original 49 and unfortunately they were not visible. I didn't use them on my 48 build. They are on my suburban frame and I won't be using them there either. May have been clip retention holes for brake line? Just a guess. Hopefully someone will chime in.

Great picture with the kids helping!

Other than nuts on inside before boxing? What components are you building the chassis with?
Advanced Design is offline   Reply With Quote
Old 10-05-2014, 10:05 PM   #90
99 to Life
Registered User
 
99 to Life's Avatar
 
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

no worries sid, got a couple OG frame builds lined up after this 49' is done. Nice work space in the BG. crazy how fast all that good work space gets filled up. Never enough room I swear.
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481

49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA

Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162

52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame

Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!


www.coffeeandcustoms.com
99 to Life is offline   Reply With Quote
Old 10-06-2014, 12:23 AM   #91
Average Joe
Registered User
 
Average Joe's Avatar
 
Join Date: Feb 2009
Location: Southern Oregon
Posts: 1,352
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Just stumbled across your build. Awesome work! I love your C4 cross member.
__________________
1967 C10 Suburban 454/TH400/3.07's

An Average Joe and His 'Burb:
http://67-72chevytrucks.com/vboard/s...d.php?t=775843
Average Joe is offline   Reply With Quote
Old 10-06-2014, 03:31 PM   #92
FarmerSid
Registered User
 
FarmerSid's Avatar
 
Join Date: Jan 2012
Location: Eastern Ontario, Canada
Posts: 1,041
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Thanks for the comments guys. Keep them coming.

So here is where I ended up yesterday afternoon. Doesn't look like much but all cab and running board mounts were removed and nuts welded inside the frame to bolt them back on as I won't be able to get inside the frame and install the nuts after it's boxed. Time consuming but fun.

Ton's and ton's and ton's of holes filled. Frame is only out of square by 1/16" so it should be good to go.





























And the front cross member and lower frame rails cleaned up in preparation for the new C4 cross member to be installed.




Man I really suck at taking pictures. What I see and what comes out of the camera is totally different.

Cheers!
__________________
1952 Canadian Chevy 1300
C4 IFS & D44 IRS
5.3 HO L33

My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938
FarmerSid is offline   Reply With Quote
Old 10-06-2014, 11:55 PM   #93
99 to Life
Registered User
 
99 to Life's Avatar
 
Join Date: Jan 2010
Location: Titusville, PA
Posts: 3,585
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

looks good, like the bolt on bracket approach
__________________
51' 99toLife finished 2011,355 sbc,5speed, patina, redoing whole truck, inter, bags, etc
http://67-72chevytrucks.com/vboard/s...d.php?t=382481

49Hardtimes s/10 susp- bagged, vortec sbc, 5 speed, patina, sold
http://67-72chevytrucks.com/vboard/s...d.php?t=594874
VIDEOS https://youtu.be/E8zHhjgS_lA
https://youtu.be/E8zHhjgS_lA

Geronimo 54' LS engine, static drop IFS, Client build, just about done
http://67-72chevytrucks.com/vboard/s...62#post7399162

52' 3100 Slowly in progress, will be painted two toned, have 235 with a t-5, lowered OG frame

Other projects, 49' farmuse 3100, killer Patina, will be slammed, LS engine, full done interior up next!


www.coffeeandcustoms.com
99 to Life is offline   Reply With Quote
Old 10-07-2014, 12:36 AM   #94
Fountain
Registered User
 
Join Date: Oct 2012
Location: Machesney Park, IL
Posts: 27
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

great looking project and moving along quickly! I PM'ed you about your crossmember dimensions. If you have a chance to respond that would be greatly appreciated. The truck is going to be awesome keep up the good work.
Fountain is offline   Reply With Quote
Old 10-07-2014, 01:41 PM   #95
FarmerSid
Registered User
 
FarmerSid's Avatar
 
Join Date: Jan 2012
Location: Eastern Ontario, Canada
Posts: 1,041
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Fountain. The plans that I referred to came from these drawing in post #91.

http://67-72chevytrucks.com/vboard/s...tockish&page=4

Thanks to Stockish in answering a lot of my stupid questions and sharing his plans. I used them along with measuring my own stock cross member. A measurement that is missing is 24 1/4" C to C between the left and right lower control arms mounts.

I will see if I have some better pics of the plans at home and will post.

Hope this helps.
__________________
1952 Canadian Chevy 1300
C4 IFS & D44 IRS
5.3 HO L33

My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938
FarmerSid is offline   Reply With Quote
Old 10-07-2014, 02:02 PM   #96
FarmerSid
Registered User
 
FarmerSid's Avatar
 
Join Date: Jan 2012
Location: Eastern Ontario, Canada
Posts: 1,041
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Quote:
Originally Posted by 99 to Life View Post
looks good, like the bolt on bracket approach
I hope it works out. The front drivers running board bracket mounts up inside the cab mount and was bolted on with bolts way too long and looked awful. It's too tight to get inside the cab mount bracket with a socket. All the running board brackets were bolted on. Are they from the factory?

I decided I wanted to bolt the brackets back on with button head bolts for a cleaner look as well as clean up the frame behind the brackets. The rear cab mounts will be attached with the same button head bolts. Up in the air on using SS button head bolts or painting them the colour of the frame.
__________________
1952 Canadian Chevy 1300
C4 IFS & D44 IRS
5.3 HO L33

My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938
FarmerSid is offline   Reply With Quote
Old 10-08-2014, 01:43 AM   #97
1954Chev
Registered User
 
Join Date: May 2012
Location: Langley BC
Posts: 6
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Sid,
I noticed that your back cab panel had no hole for the fuel filler. Which company is the panel from?
1954Chev is offline   Reply With Quote
Old 10-08-2014, 08:02 AM   #98
FarmerSid
Registered User
 
FarmerSid's Avatar
 
Join Date: Jan 2012
Location: Eastern Ontario, Canada
Posts: 1,041
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

I got my back panel from LMC truck. Had the option of filler hole or not.
__________________
1952 Canadian Chevy 1300
C4 IFS & D44 IRS
5.3 HO L33

My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938
FarmerSid is offline   Reply With Quote
Old 10-08-2014, 08:32 AM   #99
FarmerSid
Registered User
 
FarmerSid's Avatar
 
Join Date: Jan 2012
Location: Eastern Ontario, Canada
Posts: 1,041
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

Is everyone else's AD running board brackets bolted to the frame?
__________________
1952 Canadian Chevy 1300
C4 IFS & D44 IRS
5.3 HO L33

My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=632938
FarmerSid is offline   Reply With Quote
Old 10-08-2014, 09:56 AM   #100
solidaxel
Registered User
 
solidaxel's Avatar
 
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
Re: 1952 Chevy Vette Roadmaster LT1 Farm Truck Build

All the ones I have had were riveted, if they were bolted I would have removed them while I was building the trucks so I would not have hit them with my legs!!!
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD)
53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25
55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73
62 Solidaxle Corvette Roman Red (327
340hp 4spd 3:36) C4 & C5 suspension tube chassis
LS 3 4L70E
65 Corvette Coupe 327 350hp 4spd 4:11
78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42
2000 S-Type 3.0 (wife cruiser)
2003 GMC SCSB 5.3 4L60E 3:42
solidaxel is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:17 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com