How did you choose your cam and intake?

[blazerboy_4life]

Originally Posted by blackedoutharley

I had this same intake installed on a .040" over 350, with flat top pistons and 64cc chamber heads combined with a 600 Holley, in my pickup previously and it rocked with the Comp Cams 268 high energy cam.

This was with a 31" tall tire, 3.73 gears and a SM420 trans in a long bed '65.

I also installed an HEI.

I will see if I can dig up a video of it running.

Sweet! Right now i have a holly 600 until I dig up a good deal on an Edelbrock. Do you know what you were putting out for HP and Torque?