Any Reviews of These Headers? (Summit Racing, Hedman) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**KyleSeal** · 12-05-2016, 12:13 AM

https://www.summitracing.com/parts/h...del/c10-pickup

Found these, seems some reviews say C10s are what they have them on.

I'm running a standard '70s 350 and a Saginaw 3 speed, will these clear the bellcrank and such? I have it converted to floor shift, so no linkage from the column.

They seem affordable, and I've heard good stuff about Hedman. That said... what is everyone elses take?

Going on a 70 C10 with a 5.5/7 drop 350 V8 3 Speed Saginaw Hurst floorshift.

69vetteside · 12-05-2016, 04:57 AM

I just installed them on my 69/350 turbo 400. good headers heaps of room.swapped them for the hedman long tubes i had on (had to modify to fit between the frame rails and around the bottom arms)and were to low for the amount i lowered the truck . Other than that Hedman are good headers.

**special-K** · 12-05-2016, 08:53 AM

Those don't look like they'd work with clutch linkage. You need full-length with the rear tube dropping straight down or slightly forward. 3/4 length headers run right through where the bell crank assembly is.

demian5 · 12-05-2016, 12:08 PM

Throw the collector bolts in the trash and get grade 8 with locking nuts. Trust me.

12-05-2016, 12:13 AM	#1
KyleSeal Senior Member Join Date: Mar 2014 Location: Toano, VA Posts: 836	Any Reviews of These Headers? (Summit Racing, Hedman) https://www.summitracing.com/parts/h...del/c10-pickup Found these, seems some reviews say C10s are what they have them on. I'm running a standard '70s 350 and a Saginaw 3 speed, will these clear the bellcrank and such? I have it converted to floor shift, so no linkage from the column. They seem affordable, and I've heard good stuff about Hedman. That said... what is everyone elses take? Going on a 70 C10 with a 5.5/7 drop 350 V8 3 Speed Saginaw Hurst floorshift. __________________ "Sometimes I do serve as a good bad example. Glad to be of service." My Build Thread (1967 C10, lowered, EFI, daily truck): http://67-72chevytrucks.com/vboard/s...d.php?t=830809

12-05-2016, 04:57 AM	#2
69vetteside Registered User Join Date: Nov 2011 Location: perth western australia Posts: 127	Re: Any Reviews of These Headers? (Summit Racing, Hedman) I just installed them on my 69/350 turbo 400. good headers heaps of room.swapped them for the hedman long tubes i had on (had to modify to fit between the frame rails and around the bottom arms)and were to low for the amount i lowered the truck . Other than that Hedman are good headers.

12-05-2016, 08:53 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Any Reviews of These Headers? (Summit Racing, Hedman) Those don't look like they'd work with clutch linkage. You need full-length with the rear tube dropping straight down or slightly forward. 3/4 length headers run right through where the bell crank assembly is. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

12-05-2016, 12:08 PM	#4
demian5 Registered User Join Date: Aug 2016 Location: Lake Forest, CA Posts: 2,177	Re: Any Reviews of These Headers? (Summit Racing, Hedman) Throw the collector bolts in the trash and get grade 8 with locking nuts. Trust me. __________________ "Work hard, use your vacation days." 1970 C15 GMC Long Bed 1986 C20 Scottsdale 1983 K2500 Sierra Classic Suburban 6.2 Instagram: C10sofOC



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.