NY Parting out 66 C10 - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Stubnosebrock · 07-06-2011, 02:33 PM

Indian113, its a manual box. Has some play in the steering shaft before it grabs. About the usual old condition I suppose. Scott, the floors and kick panels are pretty poor. The whole cab itself is pretty bad. No visors. The rear is not a posi, but it is a 5 lug, 3:73. Im not really sure what makes the heater controls deluxe versus standard. Fill me in if you can.

**ScottH** · 07-06-2011, 02:54 PM

I'm just learning on this gen of these trucks, but I think the standard heater control has either one or two knobs, while the deluxe has individual arms. If u could post a pic of what u have it would help. BTW u might want to put a post on the 67-72 parts board for the rear.

Thanks

Stubnosebrock · 07-06-2011, 02:57 PM

Scott, Im positive mine has 3 individual levers. I can get you a picture next time im up there, but it may not be for a few days.

Indian113 · 07-06-2011, 03:15 PM

Thanks for you reply,I'm looking for a tight one as this is my wife's truck already have on ewith some play. Thanks again Ray

Stubnosebrock · 07-06-2011, 03:20 PM

Ray, no problem, Thanks, and good luck

**ScottH** · 07-06-2011, 03:23 PM

Thanks, no hurry on my end.

Stubnosebrock · 07-06-2011, 07:45 PM

Scott, I sent pictures to your email

Stubnosebrock · 07-06-2011, 07:55 PM

Some pictures of the usable stuff

Stubnosebrock · 07-06-2011, 07:57 PM

More pictures

**ScottH** · 07-06-2011, 08:01 PM

Brandon, thanks, got em. Would also like a price on the gauge cluster, review mirror.

Scott

Stubnosebrock · 07-06-2011, 08:21 PM

Scott, $75.00 for the gauge cluster. Really nice besides 2 extra screw holes for the horn button on the bezel. $15.00 for the mirror? Let me know

**ScottH** · 07-06-2011, 08:42 PM

I'll pass on the gauge cluster, but will take the RV mirror.
BTW what shape is the dash wiring in?
Email returned on the heater stuff.

Scott

chevyrestoguy · 07-06-2011, 10:04 PM

How much for the glovebox door? I really only need the plastic trim that says Chevrolet.
Alex

Stubnosebrock · 07-06-2011, 10:15 PM

Alex, $20.00? Of course, if im way off, let me know

**ScottH** · 07-06-2011, 10:33 PM

Can u post more pics of the floor whenever u get a chance?
Might be interested in some patch panels

thanks
Scott

Stubnosebrock · 07-06-2011, 10:34 PM

Scott, ill take some for you, but im sure there isnt anything you can use. Its pretty bad.

**ScottH** · 07-06-2011, 10:41 PM

Thanks Brandon, u never know, from the looks of the one pic u posted above u might have some area I could use. Of course shipping might be a killer but doesnt hurt to take a peak.

chevyrestoguy · 07-06-2011, 10:48 PM

Quote:

Originally Posted by Stubnosebrock

Alex, $20.00? Of course, if im way off, let me know

My '64 dash is painted the light fawn color, and only the '66 trucks were the dark fawn color, so it won't match my dash. What I really need is the plastic trim, but I don't know how it's attached to the glove box door. If it can come off without being damaged, I'm interested in it by itself.

shortbed70 · 07-07-2011, 08:26 AM

Hood latch? Piece that bolts to rad support and grill panel. Pm me please.
Posted via Mobile Device

Stubnosebrock · 07-07-2011, 10:34 AM

Quote:

Originally Posted by chevyrestoguy

My '64 dash is painted the light fawn color, and only the '66 trucks were the dark fawn color, so it won't match my dash. What I really need is the plastic trim, but I don't know how it's attached to the glove box door. If it can come off without being damaged, I'm interested in it by itself.

Ill take a look and see how it comes off

Stubnosebrock · 07-07-2011, 05:45 PM

more pictures

Stubnosebrock · 07-07-2011, 10:42 PM

Deluxe heater controls. Good shape with no broken arms. I have the entire deluxe heater set up

Stubnosebrock · 07-07-2011, 10:48 PM

Even more pictures

Sick5 · 07-07-2011, 10:55 PM

how about bed side patch panels

Sick5 · 07-07-2011, 10:56 PM

tail light patch panels

07-06-2011, 02:33 PM	#26
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 Indian113, its a manual box. Has some play in the steering shaft before it grabs. About the usual old condition I suppose. Scott, the floors and kick panels are pretty poor. The whole cab itself is pretty bad. No visors. The rear is not a posi, but it is a 5 lug, 3:73. Im not really sure what makes the heater controls deluxe versus standard. Fill me in if you can.

07-06-2011, 02:54 PM	#27
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,185	Re: Parting out 66 C10 I'm just learning on this gen of these trucks, but I think the standard heater control has either one or two knobs, while the deluxe has individual arms. If u could post a pic of what u have it would help. BTW u might want to put a post on the 67-72 parts board for the rear. Thanks __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon 2008 Corvette convertible

07-06-2011, 02:57 PM	#28
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 Scott, Im positive mine has 3 individual levers. I can get you a picture next time im up there, but it may not be for a few days.

07-06-2011, 03:15 PM	#29
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: Parting out 66 C10 Thanks for you reply,I'm looking for a tight one as this is my wife's truck already have on ewith some play. Thanks again Ray

07-06-2011, 03:20 PM	#30
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 Ray, no problem, Thanks, and good luck

07-06-2011, 03:23 PM	#31
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,185	Re: Parting out 66 C10 Thanks, no hurry on my end. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon 2008 Corvette convertible

07-06-2011, 07:45 PM	#32
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 Scott, I sent pictures to your email

07-06-2011, 07:55 PM	#33
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 Some pictures of the usable stuff Attached Images

07-06-2011, 07:57 PM	#34
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 More pictures Attached Images

07-06-2011, 08:01 PM	#35
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,185	Re: Parting out 66 C10 Brandon, thanks, got em. Would also like a price on the gauge cluster, review mirror. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon 2008 Corvette convertible

07-06-2011, 08:21 PM	#36
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 Scott, $75.00 for the gauge cluster. Really nice besides 2 extra screw holes for the horn button on the bezel. $15.00 for the mirror? Let me know

07-06-2011, 08:42 PM	#37
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,185	Re: Parting out 66 C10 I'll pass on the gauge cluster, but will take the RV mirror. BTW what shape is the dash wiring in? Email returned on the heater stuff. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon 2008 Corvette convertible

07-06-2011, 10:04 PM	#38
chevyrestoguy Registered User Join Date: Mar 2005 Location: apple valley, ca Posts: 2,670	Re: Parting out 66 C10 How much for the glovebox door? I really only need the plastic trim that says Chevrolet. Alex __________________ Check out my latest endeavor: https://roundsixpod.com My build threads: '55 Chevy: http://67-72chevytrucks.com/vboard/s...d.php?t=247512 '64 C-20: http://67-72chevytrucks.com/vboard/s...d.php?t=446527

07-06-2011, 10:15 PM	#39
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 Alex, $20.00? Of course, if im way off, let me know

07-06-2011, 10:33 PM	#40
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,185	Re: Parting out 66 C10 Can u post more pics of the floor whenever u get a chance? Might be interested in some patch panels thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon 2008 Corvette convertible



Register or Log In To remove these advertisements.

07-06-2011, 10:34 PM	#41
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 Scott, ill take some for you, but im sure there isnt anything you can use. Its pretty bad.

07-06-2011, 10:41 PM	#42
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,185	Re: Parting out 66 C10 Thanks Brandon, u never know, from the looks of the one pic u posted above u might have some area I could use. Of course shipping might be a killer but doesnt hurt to take a peak. __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon 2008 Corvette convertible

07-07-2011, 08:26 AM	#44
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Parting out 66 C10 Hood latch? Piece that bolts to rad support and grill panel. Pm me please. Posted via Mobile Device __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

07-07-2011, 05:45 PM	#46
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 more pictures Attached Images

07-07-2011, 10:42 PM	#47
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 Deluxe heater controls. Good shape with no broken arms. I have the entire deluxe heater set up Attached Images

07-07-2011, 10:48 PM	#48
Stubnosebrock Registered User Join Date: Apr 2011 Location: Binghamton, NY Posts: 102	Re: Parting out 66 C10 Even more pictures Attached Images

07-07-2011, 10:55 PM	#49
Sick5 C10 CLUB Y QUE! Join Date: Mar 2010 Location: Here Posts: 2,767	Re: Parting out 66 C10 how about bed side patch panels __________________ C/10 CLUB http://67-72chevytrucks.com/vboard/f...play.php?f=148

07-07-2011, 10:56 PM	#50
Sick5 C10 CLUB Y QUE! Join Date: Mar 2010 Location: Here Posts: 2,767	Re: Parting out 66 C10 tail light patch panels __________________ C/10 CLUB http://67-72chevytrucks.com/vboard/f...play.php?f=148

Register or Log In To remove these advertisements.