The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current Classic GM Trucks Classifieds > WIW

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-12-2020, 03:03 PM   #1
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,736
WIW 71/72 SWB K10 Chassis

What do you feel is the going rate for a roller SWB K10 Chassis in your area? Stock, no drive train, just a roller. Unsure of axle rates at this time. No paperwork. Overall decent shape, not rusted or tweaked.

Just trying to get a general idea.
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 07-13-2020, 04:43 PM   #2
68Bowtie4x4
Registered User
 
68Bowtie4x4's Avatar
 
Join Date: Oct 2003
Location: Athena, Oregon
Posts: 167
Re: WIW 71/72 SWB K10 Chassis

It's all about the supply and demand for it.

I wish I had a 71/72 SWB K10 frame to convert my 72 K10 LWB into a SWB.
__________________
72 Chevy Cheyenne K10 4x4 LWB, 4" lift kit, 350/350/NP205, rebuild in progress.
68Bowtie4x4 is offline   Reply With Quote
Old 07-13-2020, 09:47 PM   #3
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,736
Re: WIW 71/72 SWB K10 Chassis

This part of the board is hit or miss on getting actual answers. I was just trying to decide if it was worth letting go or just keeping it. Where its sitting right now it isn't in anyone's way and its totally covered. But if it had a decent value to some one I would let it go.

I get people are cutting them down left and right ... No cutting required on this one =)

Im knee deep in my C30 project and my panel is taking on steam. So with no pictures and a basic general idea what do you guys think?
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 07-13-2020, 10:27 PM   #4
too much stuff
Roadtrip!
 
too much stuff's Avatar
 
Join Date: Feb 2003
Location: Grand Rapids MN
Posts: 13,681
Re: WIW 71/72 SWB K10 Chassis

I would say $800-$1000. I have picked them up cheaper here, but they have some rust usually in my area.
__________________
67 gmc custom lwb dakota truck. Sold...And bought back
69 swb 4x4 project (in progress)
70 c-10 lwb texas truck
70 4x4/BB/bkts/posi/tach(retired)
70 swb (wifes)
70 jimmy camper
71 K-5 factory 2wd
71 cheyenne 4x4/tach/posi/ plow rig
71 Cheyenne20 BB, buckets, tach, tilt, 4 speed
72 jimmy CST wyoming rig
72 jimmy Colorado rig
72 lifted texas 4x4 3/4 ton burb
65 fury conv. 383/auto
65 chrysler 300 "L" 413 auto
too much stuff is offline   Reply With Quote
Old 07-14-2020, 05:54 PM   #5
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,736
Re: WIW 71/72 SWB K10 Chassis

I need to pull it out of storage and give it a good going over. Out here where rust isnt really a big issue when it comes to frames might run a little less? Not sure ... I appreciate your input though. I know you have a lot of knowledge with buying (not too much selling, hence the moniker .. Too Much Stuff) lol!
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 07-16-2020, 10:05 AM   #6
special-K
Special Order

 
special-K's Avatar
 
Join Date: Nov 2004
Location: Mt Airy, MD
Posts: 85,764
Re: WIW 71/72 SWB K10 Chassis

Quote:
Originally Posted by too much stuff View Post
I would say $800-$1000. I have picked them up cheaper here, but they have some rust usually in my area.
This ^^^. Look for rust at the front hanger and frame for the rear springs. That is a common problem area. It's been a good handful of years or better now, but I sold my complete '71 SWB 307/3spd K/10 SWB that was rusty, never tried to start, minus the bed for $1,500 for the value in the frame/VIN-plate/Glovebox door/title. That is everything needed to convert a long bed to an authentic and legal appearing SWB. That price would be more like $2,500 today. I paid $1,300 for the truck in '06
__________________
"BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed"

GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project)
GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling)
Tim

"Don't call me a redneck. I'm a rough cut country gentleman"

R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~
special-K is online now   Reply With Quote
Old 07-16-2020, 10:05 PM   #7
flashed
Registered User
 
Join Date: Oct 2009
Location: canton ga
Posts: 12,729
Re: WIW 71/72 SWB K10 Chassis

Ifit was not so far away I would want it , have a friend in need or I could make my long bed K10 into a shortbed .
flashed is offline   Reply With Quote
Old 07-18-2020, 10:50 PM   #8
kidatheart
Senior Member
 
kidatheart's Avatar
 
Join Date: May 2012
Location: Assaria, Ks
Posts: 465
Re: WIW 71/72 SWB K10 Chassis

Just me, but if you don't have to sell it, I sure wouldn't. I'm not sure what it's worth now-I would think starting at $1000 wouldn't be out of line-but whatever it is now, it won't get worth any less over time, and what if you need or want it some day?? I know you didn't ask for advice. Just my thoughts. Thanks.
kidatheart is offline   Reply With Quote
Old 07-21-2020, 09:21 PM   #9
CG
BlahBlahBlah
 
Join Date: Feb 2002
Location: Monroe, Wa.
Posts: 19,736
Re: WIW 71/72 SWB K10 Chassis

Quote:
Originally Posted by kidatheart View Post
Just me, but if you don't have to sell it, I sure wouldn't. I'm not sure what it's worth now-I would think starting at $1000 wouldn't be out of line-but whatever it is now, it won't get worth any less over time, and what if you need or want it some day?? I know you didn't ask for advice. Just my thoughts. Thanks.
I seem to be in a never ending circle of trying to get down to a couple of projects and just when I get rid of a few they come back to me. Some my fault (oops lol) but mostly trade deals gone upside down for whatever reasons. It leaves me at too much junk for my age ... who knew that day would come lol.

Basically stuff has to go, and Im trying to decide financially which stuff leaving me would bring me the most dollars.

This thread has given me a good range.
__________________
… … … … … … … … ... … … … … … … … … … … …

Monroe Swap meet May 18-19.
Mike has the same spots for the NW guys he's had forever.
Lunch time BBQ at the spaces.
If you have stuff to sell bring it along.

If you have a question PM stllookn (Mike) here via the board.


https://67-72chevytrucks.com/vboard/...d.php?t=851291
CG is offline   Reply With Quote
Old 07-30-2020, 12:41 AM   #10
Greasey Harley
Registered User
 
Greasey Harley's Avatar
 
Join Date: May 2013
Location: Post Falls, ID
Posts: 884
Re: WIW 71/72 SWB K10 Chassis

Here in Idaho if it doesn't come with a title, it's worth the tires axles and springs.
Idaho checks the VIN Numbers on the frame, and they better match the cab, or you better have a title for both.
If not, they have the authority to impound the vehicle, until it's figured out.

Now that that's out of the way,

Depending on condition, I would say $800 to $1000

-Russ
__________________
Insert clever text here:
Greasey Harley is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:36 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com