The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board > projects and builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-08-2012, 03:21 PM   #51
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

I got seven tracking numbers emailed to me from Porterbuilt today. Estimated arrival next Tuesday. Then........It's on!
DURG is offline   Reply With Quote
Old 08-13-2012, 04:51 PM   #52
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Did some of the high hump install today. I cut out the old one and have the holes drilled for the mounting bolts. I ordered some 5/16" threaded square nuts to weld on the underside so it will be like a stock install. Once those are in and the bolts tightened, I will spot weld the forward firewall mating section in. I am transferring the gas pedal stud mount over from the low hump as the high hump had 1/4" nuts for the pedal studs and my stock low hump pedal mount studs are 5/16" thread. Pictures below:

stock low hump:


Hole after removal:


High hump in place:


Porterbuilt stuff is scheduled to arrive sometime tommorrow.
DURG is offline   Reply With Quote
Old 08-13-2012, 05:14 PM   #53
rmvlt1100
Registered User
 
rmvlt1100's Avatar
 
Join Date: Jan 2012
Location: Crest Hill, IL
Posts: 337
Re: DURG's Black 65 C10

Quote:
Originally Posted by DURG View Post
Did some of the high hump install today. I cut out the old one and have the holes drilled for the mounting bolts. I ordered some 5/16" threaded square nuts to weld on the underside so it will be like a stock install. Once those are in and the bolts tightened, I will spot weld the forward firewall mating section in. I am transferring the gas pedal stud mount over from the low hump as the high hump had 1/4" nuts for the pedal studs and my stock low hump pedal mount studs are 5/16" thread. Pictures below:

stock low hump:


Hole after removal:


High hump in place:


Porterbuilt stuff is scheduled to arrive sometime tommorrow.


DURGS,
Very clean truck you started your build with. It's looking good. Have fun with the rest of the build.
__________________
This is my Build A 5.3L 1965 C-10 Fleetside
http://67-72chevytrucks.com/vboard/s...d.php?t=502100
rmvlt1100 is offline   Reply With Quote
Old 08-13-2012, 09:36 PM   #54
KombiMonster
Registered User
 
Join Date: Jul 2012
Location: Cen*Cal
Posts: 16
Re: DURG's Black 65 C10

Very nice Impala! Are the front wheels smaller than the back with bigger tires?

Solid truck!
KombiMonster is offline   Reply With Quote
Old 08-13-2012, 10:00 PM   #55
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Yeah the Impala has 18" on front and 20" on rear. Truck will have 20" on front and 22" on rear. Same Coy's C-5 Gray wheels. (If they ever ship).
DURG is offline   Reply With Quote
Old 08-15-2012, 06:46 AM   #56
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Tuesday was a big day. Most of the Porterbuilt parts showed up. Few small items coming next week.







Look at the amount of work just in the Dropmember itself:

DURG is offline   Reply With Quote
Old 08-15-2012, 07:05 AM   #57
Leadfoot Lambert
Registered User
 
Leadfoot Lambert's Avatar
 
Join Date: Jan 2011
Location: Saco, Maine
Posts: 377
Re: DURG's Black 65 C10

That's awesome! Cant wait to see it all come together.
__________________
65 Chevy short fleet 350 5 speed, soon to be LSX powered
65 F100 short fleet
91 Heritage softail
94 Fatboy
11 Softail Deluxe [wife's bike]
13 Streetglide
http://www.youtube.com/watch?v=yMFMw...eature=mh_lolz
Leadfoot Lambert is offline   Reply With Quote
Old 08-15-2012, 07:38 AM   #58
coulter
Registered User
 
coulter's Avatar
 
Join Date: Feb 2011
Location: muskogee, ok
Posts: 1,091
Re: DURG's Black 65 C10

xmas in august!!!! bet you were stoked to open all those boxes!!!
__________________

bagged 66 longbed build
http://67-72chevytrucks.com/vboard/s...d.php?t=449548

my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918
coulter is offline   Reply With Quote
Old 08-15-2012, 06:45 PM   #59
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Still waiting on my rear bushings and heim joints and hardware kits for the rear stuff. I took my boy fishing today so will probably actually start putting some stuff together Thursday. Quality looks really nice.
DURG is offline   Reply With Quote
Old 08-15-2012, 06:59 PM   #60
KombiMonster
Registered User
 
Join Date: Jul 2012
Location: Cen*Cal
Posts: 16
Re: DURG's Black 65 C10

definitly makes me want a PorterBuilt C-10!
KombiMonster is offline   Reply With Quote
Old 08-16-2012, 09:55 PM   #61
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

I got started on the Porterbuilt install last night and today. Bunch of pictures, It is the Touring coilover version with four link and the weld in rear notches. Looks like the bed will need to be raised about 5-1/2" as expected. Everyhting is just installed loose so far. I also put the rear end housing mounts on the tubes but the are just tacked together and still rotate on the tube. I also plan on doing the crossmember bracing so I got a tabless PB truck arm crossmember too.





DURG is offline   Reply With Quote
Old 08-16-2012, 09:57 PM   #62
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Pictures cont:









DURG is offline   Reply With Quote
Old 08-16-2012, 10:00 PM   #63
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Moving to the front stuff:









DURG is offline   Reply With Quote
Old 08-17-2012, 12:28 AM   #64
64shortc10
Registered User
 
64shortc10's Avatar
 
Join Date: Jan 2007
Location: Winters, Ca.
Posts: 1,069
Re: DURG's Black 65 C10

Very Nice! Moving right along! Keep it going.
Tony from Norcal
Posted via Mobile Device
64shortc10 is offline   Reply With Quote
Old 08-19-2012, 09:24 PM   #65
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Thanks. I put the front coilovers in, checked out the panhard bar on the rearend, and set the rear coilovers in their mounts. I need to trim a gusset of the rear bridge mount to allow the coilovers to swing inboard slightly. I did a bunch of welding on the rear notches today and cut out the original frame section.





DURG is offline   Reply With Quote
Old 08-19-2012, 09:57 PM   #66
northern 85
Registered User
 
northern 85's Avatar
 
Join Date: Mar 2005
Location: Fairfield Maine
Posts: 1,759
Re: DURG's Black 65 C10

Going to be badass nice work!
northern 85 is offline   Reply With Quote
Old 08-19-2012, 10:17 PM   #67
LowDown
Account Suspended
 
Join Date: Jan 2011
Location: Bootjack, Ca.
Posts: 55
Re: DURG's Black 65 C10

Great work ! subscribed
LowDown is offline   Reply With Quote
Old 08-19-2012, 10:53 PM   #68
DIRTY HAIR
Registered User
 
Join Date: Feb 2012
Location: DALLAS
Posts: 136
Re: DURG's Black 65 C10

Very very nice!
DIRTY HAIR is offline   Reply With Quote
Old 08-20-2012, 05:54 AM   #69
mark 66
Registered User
 
Join Date: Jun 2012
Location: cleawater florida
Posts: 246
Re: DURG's Black 65 C10

first time ive seen coilovers with a porterbuilt set up.gotta love porterbuilt.very nice.should handle like a go cart.
mark 66 is offline   Reply With Quote
Old 08-25-2012, 06:29 PM   #70
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

I did some more work today. Goal was to finish welding up notch lower caps and get rear end hung in place on the trailing arms. Nate is making me another bridge assy as mine apparently was not the right one for the coilover upper mounting. Here are some pictures:





DURG is offline   Reply With Quote
Old 08-25-2012, 06:31 PM   #71
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10



Warning: OFF TOPIC!

Picture I took along with these ones to post on a Vette forum of my 2011 Grand Sport with black chrome wheels:

DURG is offline   Reply With Quote
Old 08-25-2012, 06:36 PM   #72
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

It's like Deja Vu all over again here is my Impala a few years ago:

DURG is offline   Reply With Quote
Old 08-31-2012, 05:22 AM   #73
northern 85
Registered User
 
northern 85's Avatar
 
Join Date: Mar 2005
Location: Fairfield Maine
Posts: 1,759
Re: DURG's Black 65 C10

Nice work,you are going to have one sweet lineup of of black rides!
northern 85 is offline   Reply With Quote
Old 08-31-2012, 06:16 AM   #74
DURG
Registered User
 
DURG's Avatar
 
Join Date: May 2012
Location: Scarborough ME.
Posts: 413
Re: DURG's Black 65 C10

Thanks. I am getting the new Porterbuilt bridge assy. and some misc. hardware I also needed from PB today via UPS if the tracking numbers are accurate. Should get some more time this weekend to work on the truck.
__________________
1962 Impala SS 383 stroker Tremec TKO 600 Black
1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black
2003 100th Anniversary Road King Classic Silver Black
DURG is offline   Reply With Quote
Old 08-31-2012, 08:38 AM   #75
coulter
Registered User
 
coulter's Avatar
 
Join Date: Feb 2011
Location: muskogee, ok
Posts: 1,091
Re: DURG's Black 65 C10

badass looking setup!!! nice work
__________________

bagged 66 longbed build
http://67-72chevytrucks.com/vboard/s...d.php?t=449548

my favorite colors.. black, rust, and shiny!!!! instagram: @coulter918
coulter is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:12 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com