The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-06-2020, 03:12 PM   #1
Jeepwm69
Registered User
 
Join Date: Jan 2009
Location: Arkansas
Posts: 668
Rust in my 83 GMC rockers

My 83 GMC has been outside it's entire life. When I moved off for about 10 years, Dad tossed a rock through the back glass with a mower, and parked it around back with a tarp over the busted window. Over the years I'm guessing debris/leaves etc got in there and kept things moist, so I have some rot.

My question is, what all needs to be cut out here? I see replacement panels are cheap and all of them are available, but I haven't cut into a GM like this before.

Who makes the best panels? I know in the Jeep world they are NOT all created equal. Classic Enterprises is the go-to for Jeep panels. Is there a supplier for these squarebodies that makes a superior product?

First three pics are of the driver's side. The 3rd pic is where the floorpan meets the kick panel under the e brake.
Attached Images
   
Jeepwm69 is offline   Reply With Quote
Old 07-06-2020, 03:14 PM   #2
Jeepwm69
Registered User
 
Join Date: Jan 2009
Location: Arkansas
Posts: 668
Re: Rust in my 83 GMC rockers

Passenger side. Initially I didn't think it was as bad, but after cleaning it out a little it was rotting too.

I've wire brushed everything and painted phosphoric acid on it now which will hopefully slow things down until I can cut out the rot and weld in new metal.
Attached Images
 
Jeepwm69 is offline   Reply With Quote
Old 08-01-2020, 07:37 AM   #3
Old Truck Man
Registered User
 
Old Truck Man's Avatar
 
Join Date: Feb 2014
Location: Pocahontas Arkansas
Posts: 684
Re: Rust in my 83 GMC rockers

I have a Rust free GMC cab. Its pretty much stripped . You could use it or cut what you need from it. $200 cash. It still has the back glass . The windshield is cracked.In located 11 miles west of Pocahontas Ar at the Hwy 90 &93 jct. PH 1-870-248-9172
Attached Images
 

Last edited by Old Truck Man; 08-01-2020 at 07:41 AM. Reason: add info
Old Truck Man is offline   Reply With Quote
Old 08-03-2020, 03:30 PM   #4
Jeepwm69
Registered User
 
Join Date: Jan 2009
Location: Arkansas
Posts: 668
Re: Rust in my 83 GMC rockers

Quote:
Originally Posted by Old Truck Man View Post
I have a Rust free GMC cab. Its pretty much stripped . You could use it or cut what you need from it. $200 cash. It still has the back glass . The windshield is cracked.In located 11 miles west of Pocahontas Ar at the Hwy 90 &93 jct. PH 1-870-248-9172
What I need would probably be much easier to just get replacement panels and weld in. No need to replace the whole cab.

Thanks though! I'm a far piece south of you or I'd come up and poke around that thing for parts though! LOL
Jeepwm69 is offline   Reply With Quote
Old 08-03-2020, 05:29 PM   #5
pound41
Registered User
 
Join Date: Dec 2002
Location: Northern Virginia
Posts: 1,266
Re: Rust in my 83 GMC rockers

Go to youtube find the videos by milkcrate82 I think. Floor replacement on a square body
Hard to tell from your pics. Kick panel obviously some of the floor pan. without looking at it could be inner rocker and cab mount. Near your rust in the pic all 3 tie together
pound41 is offline   Reply With Quote
Old 08-04-2020, 12:41 PM   #6
Jeepwm69
Registered User
 
Join Date: Jan 2009
Location: Arkansas
Posts: 668
Re: Rust in my 83 GMC rockers

Quote:
Originally Posted by pound41 View Post
Go to youtube find the videos by milkcrate82 I think. Floor replacement on a square body
Hard to tell from your pics. Kick panel obviously some of the floor pan. without looking at it could be inner rocker and cab mount. Near your rust in the pic all 3 tie together
Found it. Thank you for the details.

Floor pans are solid. Basically the rust is on the sill where the weather stripping is, and possibly along the seam where the floor pan and kick panel meet.

Out of curiousity, what causes rust in the floor pan/ kick panel seam? Guessing it has to rust from the outside in, as there aren't any leaks allowing water in up in the cab/ firewall.
Jeepwm69 is offline   Reply With Quote
Old 08-09-2020, 07:39 PM   #7
Honest Bob
Registered User
 
Honest Bob's Avatar
 
Join Date: Jan 2017
Location: Easton PA
Posts: 209
Re: Rust in my 83 GMC rockers

I cant answer your question but my 75 is rusted in the same spots.
Honest Bob is offline   Reply With Quote
Old 08-10-2020, 07:30 AM   #8
kglowacky
Registered User
 
Join Date: Mar 2020
Location: The Woodlands,Tx
Posts: 555
Re: Rust in my 83 GMC rockers

Mine rusted in the same place also. Looks like you will need a new outside rocker to start. I bought mine from Classic and it fit well. Not much to replacing it just decide how much you want to replace and cut accordingly. here is my project.
Name:  20200808_142018.jpg
Views: 119
Size:  48.7 KB

Name:  20200808_135917.jpg
Views: 119
Size:  41.8 KB

Name:  20200808_131536.jpg
Views: 118
Size:  38.3 KB
kglowacky is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 05:02 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com