700r4 users - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jasonrog · 08-04-2003, 01:57 AM

For those of you who have put a 700r4 with a quadrajet, what tv cable mount did you use?

Thanks

Jason

BobbyK · 08-04-2003, 06:01 AM

When I was carburated I used one from Jeg's or Summit

here is the ad in summits site.
http://store.summitracing.com/defaul...+cable+bracket

Tx Firefighter · 08-04-2003, 08:09 AM

Any mid 80s Chevy truck with a Q-jet and 700 should work. There a billions of them in the junkyards. Just look for a pre 87 (EFI) truck with the overdrive PRNDLL thing on the dash.

Custom 68 · 08-04-2003, 09:36 AM

Bobby what do you use now with the TPI?

ckhd · 08-04-2003, 10:43 AM

I got a thing from Bowtie Overdrives that adapted my carb to work with the TV cable. Has to have the right linkage on the carb though...

jasonrog · 08-04-2003, 11:11 AM

How do I tell if my carb has the right linkage or not?

iluvmy72 · 08-04-2003, 11:28 AM

go to the bone yard......look for an early 80's chevy sedans and wagons I find great parts on the capriece and malibu's and ofton the chevy vans

bigvinnie · 08-04-2003, 01:20 PM

The one in BobbyK's post is the one I'm using with my QJet... I think I got mine from Summit...

jasonrog · 08-04-2003, 03:23 PM

So would anything from a rear wheel drive and quadrajet work? As long as it was a 700 or 200 trans?

BobbyK · 08-04-2003, 06:41 PM

Custom 68

I use the stock mount that comes on the TPI air plenum.

Don Smith · 08-04-2003, 09:02 PM

I used TV cable P/N 25515598 and Bracket P/N 22504927. Bracket has cutouts for Accel. cable and TV cable. Looks factory.
Both are available from GM . Bracket mounts to two rear bolts on Carb.

08-04-2003, 01:57 AM	#1
jasonrog Registered User Join Date: Sep 2000 Location: Winnipeg, Manitoba Canada Posts: 248	700r4 users For those of you who have put a 700r4 with a quadrajet, what tv cable mount did you use? Thanks Jason

08-04-2003, 06:01 AM	#2
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,769	When I was carburated I used one from Jeg's or Summit here is the ad in summits site. http://store.summitracing.com/defaul...+cable+bracket __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

08-04-2003, 08:09 AM	#3
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Any mid 80s Chevy truck with a Q-jet and 700 should work. There a billions of them in the junkyards. Just look for a pre 87 (EFI) truck with the overdrive PRNDLL thing on the dash. __________________ I'm on the Instagram- @Gearhead_Kevin

08-04-2003, 09:36 AM	#4
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,928	Bobby what do you use now with the TPI? __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

08-04-2003, 10:43 AM	#5
ckhd Registered User Join Date: Oct 2000 Location: St. Johns, Arizona Posts: 2,660	I got a thing from Bowtie Overdrives that adapted my carb to work with the TV cable. Has to have the right linkage on the carb though... __________________ my 2¢ - t.i.o.l.i. Bowen 1968 K20 fleet 1969 K10 swb fleet 1972 K10 Suburban 1972 C10 lwb step 1992 K1500 'burb 1995 K2500 'burb 1997 C1500 'burb 1999 K1500 2000 K1500 'burb Why do I own so many Suburbans?

08-04-2003, 11:11 AM	#6
jasonrog Registered User Join Date: Sep 2000 Location: Winnipeg, Manitoba Canada Posts: 248	How do I tell if my carb has the right linkage or not?

08-04-2003, 11:28 AM	#7
iluvmy72 Registered User Join Date: Jan 2002 Location: Springville, UT, USA Posts: 1,010	boneyard time go to the bone yard......look for an early 80's chevy sedans and wagons I find great parts on the capriece and malibu's and ofton the chevy vans

08-04-2003, 01:20 PM	#8
bigvinnie Registered User Join Date: Aug 2001 Location: escondido, ca 92026 Posts: 1,222	The one in BobbyK's post is the one I'm using with my QJet... I think I got mine from Summit... __________________ '72 short step, 350, 700R4, tilt, ps, pdb, a/c, lowered coils, etc., other work in progress... San Diego, CA 72 Stepside Project

08-04-2003, 03:23 PM	#9
jasonrog Registered User Join Date: Sep 2000 Location: Winnipeg, Manitoba Canada Posts: 248	So would anything from a rear wheel drive and quadrajet work? As long as it was a 700 or 200 trans?

08-04-2003, 06:41 PM	#10
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,769	Custom 68 I use the stock mount that comes on the TPI air plenum. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

08-04-2003, 09:02 PM	#11
Don Smith Registered User Join Date: Jul 2000 Location: Hampton, Ga, USA Posts: 217	I used TV cable P/N 25515598 and Bracket P/N 22504927. Bracket has cutouts for Accel. cable and TV cable. Looks factory. Both are available from GM . Bracket mounts to two rear bolts on Carb. __________________ 68 Short Stepside, 350, quadrajet, 700r4, 3:73 posi, power front discs, HEI, Factory Air, Tilt, Tach, accelerator cable instead of rod, sway bar. 96 Impala SS 97 Monte Carlo



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.