The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 02-18-2013, 11:05 AM   #1
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,818
LSX swappers what ya got?!?!

I've been wanting to start a a thread like this for a while, so here goes. We have a lot of LS swaps going on with a million questions about each. I thought it would be cool and informative to list a brief desrcription of your swap and the parts you have used.


I'll start:

Model: 1969 C10 Suburban
Motor: 2006 5.3 (Tahoe)
Transmission: 2006 4L60E with Corvette servo (Tahoe)
Oil pan: 2007 Cadilac CTsV
Motor mounts: ECE
Tranny mount: ECE
Tranny Tunnel: Low hump
Radiator: Entropy dual pass with electric fans
Fuel tank: ECE stainless in tank pump
Shift linkage: Column/Lokar
Exhaust manifolds: Doug Thorley 324Ys
Gears: 3.73
Tire size: 30"
Carb or EFI: EFI
Bagged: yes
Running: not yet...
Go Fast: M112 Maggie

Build thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=200387

Let's try to stick to this format as best as possible. Throw in a picture if you would like. Also, if some one asks you a question, add the answer back to your original post. If this goes well, hopefully the moderators will make it a sticky, .
Posted via Mobile Device

Last edited by Hart_Rod; 02-18-2013 at 02:14 PM.
Hart_Rod is offline   Reply With Quote
Old 02-18-2013, 01:02 PM   #2
joesgreen67
Registered User
 
joesgreen67's Avatar
 
Join Date: May 2009
Location: Goldsboro NC
Posts: 151
Re: LSX swappers what ya got?!?!

Model: 1967 C10 LWB
Motor/transmission: 2009 5.3/4L60E (Silverado)
Fuel tank: 87-90 Jeep Wrangler in ac delco tank pump, '87 blazer sending unit
Motor mounts: ECE
Tranny mount: stock auto with 1/2" spacer under mount
Tranny pan: stock 4L60E
Radiator: Champion with dual electric fans
Shift linkage: Column/Speedway
Exhaust manifolds: Racing Innovations
Gears: 3.73
Tire size: 20 x 8.5, 20 x 10
Bagged: no
Running: HELL YES!!
joesgreen67 is offline   Reply With Quote
Old 02-18-2013, 01:12 PM   #3
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: LSX swappers what ya got?!?!

Model: 1966 C10 SBW,SWB Step
Motor/transmission: 2003/4 LQ4 + Built 97 4l80e
Fuel tank: 16gal sumped fuel cell
Motor mounts: SBC+ Advance Adapter plate
Tranny mount: stock re-drilled
Oil pan: LH8/Hot Rod Pan
Radiator: Be-Cool sbc swap radiator, Be-Cool fans
Shift linkage: Floor shift w/ Kilduff gated shifter
Exhaust manifolds: TBSS Manifolds
Gears: 3.73
Rear End: Truck 12 bolt, 5lug Moser Axles
Tire size: Rear 325/55/15 M/T
Bagged: No
Running: Yes, very much so.
Build thread: The HatredCopter
Carb or FI: FI
Go Fast: Tsunami Cam/PRC/tuned by West Bend Dyno
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

Last edited by BR3W CITY; 02-18-2013 at 05:02 PM.
BR3W CITY is offline   Reply With Quote
Old 02-18-2013, 01:14 PM   #4
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: LSX swappers what ya got?!?!

Here it is blank (ok so I added some stuff)

Model:
Motor/transmission:
Fuel tank:
Motor mounts:
Tranny mount:
Oil pan:
Radiator:
Shift linkage:
Exhaust manifolds:
Gears:
Rear End:
Tire size:
Bagged:
Running:
Build thread:
Carb or FI:
Go Fast:
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

Last edited by BR3W CITY; 02-18-2013 at 05:01 PM.
BR3W CITY is offline   Reply With Quote
Old 02-18-2013, 01:23 PM   #5
Indian113
Registered User
 
Indian113's Avatar
 
Join Date: Sep 2009
Location: Monroe,Iowa
Posts: 4,370
Re: LSX swappers what ya got?!?!

Model: 1992 S10
Motor/transmission: 5.3/700R4
Fuel tank: 18 gal. fuel cell
Motor mounts: Made my own
Tranny mount: made my own
Tranny pan: stock
Radiator: V8 Aluminum S10 w/twin electric fans
Shift linkage: B&M Quicksilver
Exhaust manifolds: Patriot Headers
Gears: 3:42
Rear End: 2001 Extreme
Tire size: 275/60-15
Bagged: No
Running: OH YEAH!
Build thread:
Carb or FI: FI
Go Fast:[/QUOTE]Sometimes
Indian113 is offline   Reply With Quote
Old 02-18-2013, 01:46 PM   #6
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LSX swappers what ya got?!?!

Model: 1972 C 10 SWB
Motor/transmission: 2003 6.0/4l80e
Fuel tank: Stock '72
Motor mounts: Home made stands, factory mounts
Tranny mount: Factory '72 crossmember, 350 turbo mount
Oil pan: Stock truck
Radiator: Stock '72, steam port added
Shift linkage: Slightly modified stock '72
Exhaust manifolds: '99-02 F body manifolds
Gears: 3.73
Rear End: Stock '72 12 bolt
Tire size:
Bagged: No
Running: Like a scolded dog!
Build thread: http://ls1tech.com/forums/conversion...6-0-4l80e.html
Carb or FI: EFI
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html

Last edited by ls1nova71; 02-18-2013 at 10:40 PM.
ls1nova71 is offline   Reply With Quote
Old 02-18-2013, 01:55 PM   #7
ls1nova71
Registered User
 
ls1nova71's Avatar
 
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,117
Re: LSX swappers what ya got?!?!

Model: 1971 C 10 SWB
Motor/transmission: 2003/2 5.3/4l60e
Fuel tank: Stock, sumped, feeding external Walbro 255
Motor mounts: Home made stands, factory 5.3 mounts
Tranny mount: Stock crossmember, 350 turbo mount
Oil pan: Stock truck
Radiator: Stock '71
Shift linkage: Modified stock '71
Exhaust manifolds: Trailblazer SS
Gears: Factory 3.07 Posi
Rear End: '71 12 bolt
Tire size: 225/75/15 yes they're whitewalls
Bagged: No
Running: Yes
Build thread:http://ls1tech.com/forums/conversion...71-c-10-a.html
Carb or FI: EFI
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html

5.3 swap into my RUSTY '71 C10
http://ls1tech.com/forums/conversion...71-c-10-a.html

Last edited by ls1nova71; 02-18-2013 at 10:41 PM.
ls1nova71 is offline   Reply With Quote
Old 02-18-2013, 02:04 PM   #8
hilljob26
Registered User
 
hilljob26's Avatar
 
Join Date: Dec 2004
Location: Gypsum Kansas 67448
Posts: 1,681
Re: LSX swappers what ya got?!?!

Model: 1969 Blazer
Motor/transmission: 2001 yukon 5.3/4l60e
Fuel tank: 69 blazer w/ 01 yukon pump
Motor mounts: hand made
Tranny mount: advanced adapters 4l60e/npsor
Tranny pan: stock 4l60e with corner cut out
Radiator: not there yet
Shift linkage: 01 yukon
Exhaust manifolds: trailblazer ss
Gears: 3.08
Tire size: 35"
Bagged: no
Running: not yet...
Build thread:

http://67-72chevytrucks.com/vboard/s...d.php?t=542497
__________________
21 2500hd duramax
58 apache

HILLJOB GRAPHIX--for all your graphic needs
My build thread
http://67-72chevytrucks.com/vboard/s...d.php?t=542497
LS ENGINE SWAP INFORMATION THREAD
http://67-72chevytrucks.com/vboard/s...d.php?t=377348
4l60 to an NP205
http://67-72chevytrucks.com/vboard/s...43#post3697343
hilljob26 is offline   Reply With Quote
Old 02-18-2013, 02:11 PM   #9
Hart_Rod
*************
 
Hart_Rod's Avatar
 
Join Date: Apr 2005
Location: Pensacola, FL
Posts: 17,818
Re: LSX swappers what ya got?!?!

Guys where I had tranny pan, I meant to put oil pan because of the different choices.
Hart_Rod is offline   Reply With Quote
Old 02-18-2013, 05:02 PM   #10
BR3W CITY
meowMEOWmeowMEOW
 
BR3W CITY's Avatar
 
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
Re: LSX swappers what ya got?!?!

Quote:
Originally Posted by Hart_Rod View Post
Guys where I had tranny pan, I meant to put oil pan because of the different choices.
I edited the blank one to reflect.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING

MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
BR3W CITY is offline   Reply With Quote
Old 02-18-2013, 07:28 PM   #11
Crash_OK
Registered User
 
Crash_OK's Avatar
 
Join Date: Nov 2011
Location: Edmond, OK.
Posts: 1,362
Re: LSX swappers what ya got?!?!

Model: 1969 Chevy K10 SWB
Motor/transmission: 2005 5.3 with matching 4L60e (Tahoe)/69 NP205 TC (AA tailshaft)
Fuel tank: Boyd Welding with internal fuel pump
Motor mounts: 73up clam shell type using Pacific Fabrication cross member
Tranny mount: Stock - advanced adapters conversion kit for the tranny to TC
Oil pan: Stock
Radiator: Stock 4 core from 69/with electric fans from 2001 f-body LS
Shift linkage: stock
Exhaust manifolds: Trailblazer SS
Gears: 3.73 (Yukon) both front and rear
Rear End: 12 bolt
Tire size: 35/12.50/18
Bagged: lifted
Running: Yes
Build thread: Crash's 69 K10
Carb or FI: Stock FI/with modified stock harness
Go Fast: Doubt it.. but maybe in the mud..
__________________
Mark
-----------------------

Crash's 69 4x4 SWB

Crash's Roof over Lake Home

Crash's 1988 Land Cruiser Build

Last edited by Crash_OK; 08-19-2013 at 10:05 PM.
Crash_OK is offline   Reply With Quote
Old 02-18-2013, 07:44 PM   #12
85burb
Registered User
 
85burb's Avatar
 
Join Date: Dec 2009
Location: lindale,tx
Posts: 2,373
Re: LSX swappers what ya got?!?!

Model: 85 k20 suburban
Motor/transmission: lq4 6.0 / 700r4/ np208
Fuel tank: stock
Motor mounts: dirty dingo slider plates with stock type poly bushings
Tranny mount: stock
Oil pan: truck pan
Radiator: aluminum duel fans
Shift linkage: stock
Exhaust manifolds: doug thorly
Gears: 4.10
Rear End: 10 bolt front/14 bolt sf rear
Tire size: 285/75/16
Bagged: lifted
Running: was, swapping efi back
Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=393076
Carb or FI: had both. carb, aftermarket efi, now going to stock efi
Go Fast: cam, headers, 3 inch duel exhaust.
__________________
82 c10 5.3/4l60
84 c20 5.3/sm465
85 chevy k10 suburban LQ4/4l60
91 chevy c10 suburban Lsa 5.3/4l60
2017 Silverado whipple 5.3
1964 Vw beetle
1974 vw beetle
85burb is offline   Reply With Quote
Old 02-18-2013, 10:06 PM   #13
chev3600
Senior Member
 
chev3600's Avatar
 
Join Date: Jan 2009
Location: Raleigh, NC
Posts: 444
Re: LSX swappers what ya got?!?!

No AD trucks?

Model: 1949 3100 pickup
Motor/transmission: 2001 5.3, 02 4l60e
Fuel tank: 87 wrangler
Motor mounts: speedway/ebay plates
Tranny mount: modified stock
Oil pan: truck
Radiator: champion aluminum
Shift linkage: b+m floor
Exhaust manifolds: Trailblazer SS
Gears: 3:73
Rear End: explorer 8.8
Tire size: 235-45-17
Bagged: no
Running: Yes, sir!
Build thread: kinda. http://67-72chevytrucks.com/vboard/s...d.php?t=562572
Carb or FI: FI
Go Fast:nah. Stock is ok for a minute.
Posted via Mobile Device
__________________
1949/1954 with LS swap-yeah!

http://s260.photobucket.com/albums/i...0/AD%20trucks/jumbled mess of unorganized photos

Last edited by chev3600; 02-18-2013 at 10:25 PM. Reason: Added build thread
chev3600 is offline   Reply With Quote
Old 02-18-2013, 10:14 PM   #14
whitels1
Registered User
 
whitels1's Avatar
 
Join Date: Apr 2012
Location: Vegas
Posts: 617
Re: LSX swappers what ya got?!?!

Model: 81 K5 Blazer.
Motor/transmission/transfer case: 5.3, SM465, NP205.
Fuel tank: Stock modified for an 03 Silverado Pump.
Motor mounts: Advanced adapter plates, stock mounts.
Tranny mount: Stock.
Oil pan: Truck.
Radiator: Stock with 98 windstar fans
Shift linkage: N/A
Exhaust manifolds: 99 F-body.
Gears: 3.73
Rear End: 10 bolt front, 14 bolt sf rear.
Tire size: 35"
Bagged: N/A
Running: Like a BOSS!!
Build thread: 81 K5 "Arctic Blaze" H.O. 5.3 / SM465 swap
Carb or FI: Seriously? ...EFI
Go Fast: Flat topped 4.8 pistons, 10.4 compression, true duals.
__________________

GoldyLS1 K20 Build


My K10 Rock Crawler

-Dave
whitels1 is offline   Reply With Quote
Old 02-19-2013, 02:54 AM   #15
Nitschke
Registered User
 
Nitschke's Avatar
 
Join Date: Jan 2009
Location: Vancouver, WA
Posts: 53
Re: LSX swappers what ya got?!?!

Model: 72
Motor/transmission: LY6 6.0 / 6L80E
Fuel tank: n/a but will be out back
Motor mounts: Home Made
Tranny mount: Home Made
Tranny Tunnel: low hump
Oil pan: Truck
Radiator: Aluminum 2 core
Shift linkage: n/a
Exhaust manifolds: Headers
Gears: 4.10
Rear End: 12 bolt
Tire size: n/a
Bagged: No
Running: Not yet
Build thread: Soon
Carb or FI: EFI!
Go Fast: VVT 2 Cam
Posted via Mobile Device
Attached Images
 
__________________
~72 Chevy Truck~

Motor: LY6 6.0 Liter
Trans: 6L80E
Still under construction
Nitschke is offline   Reply With Quote
Old 02-19-2013, 09:30 AM   #16
Jon01
Registered User
 
Jon01's Avatar
 
Join Date: Nov 2012
Location: West Des Moines, Iowa
Posts: 450
Re: LSX swappers what ya got?!?!

Model: 71 C10 SWB
Motor/transmission: LQ4/4L80E
Fuel tank: Stock, Walbro 255 inline
Motor mounts: Ebay adapter plates
Tranny mount: Stock x-member
Oil pan: Truck
Radiator: Stock
Shift linkage: Lokar
Exhaust manifolds: TBSS headers
Gears: 3.73
Rear End: 12 bolt
Tire size: 255/60/15
Bagged: Not yet, 4/6 ECE drop
Running: Not yet
Build thread: Will start one when work gets serious
Carb or FI: FI
Go Fast: 243 heads milled .015, custom Tick cam
Jon01 is offline   Reply With Quote
Old 02-19-2013, 10:40 AM   #17
raic65
Registered User
 
raic65's Avatar
 
Join Date: May 2011
Location: Bonita, Ca
Posts: 154
Re: LSX swappers what ya got?!?!

Model: 1966 C10
Motor/transmission: 2007 Silverado LY6/6L90
Fuel tank: Rick's SS Tank w/ Vaporworx setup mounted under bed
Motor mounts: Stock w/ adapter plates
Tranny mount: Custom made
Oil pan: Stock LY6
Radiator: Bolt-in Griffin Aluminum w/ 16" SPAL Fan
Shift linkage: Ididit Cable
Exhaust manifolds: Edelbrock Swap Headers
Gears: 3.40
Rear End: 12 bolt
Tire size: 275/40R18 Front 345/30R19 Rear
Bagged: Rear only
Running: Yes
Build thread: None
Carb or FI: FI
Go Fast: Eventually twin turbo setup

Last edited by raic65; 02-19-2013 at 10:47 AM.
raic65 is offline   Reply With Quote
Old 02-19-2013, 12:00 PM   #18
mrhurt73
Registered User
 
Join Date: Aug 2012
Location: clifton forge, va
Posts: 261
Re: LSX swappers what ya got?!?!

Model: 1957 body, 1979 C-10 frame
Motor/transmission: 2000 GMC 5.3L, 4L60E
Fuel tank: summit universal
Motor mounts: scotts hot rod's
Tranny mount: factory C-10 for turbo 350
Oil pan: 2010 caddy CTS-V
Radiator: flex a lite model 66000
Shift linkage: lokar
Exhaust manifolds: trailblazer SS
Gears: factory 3.08
Rear End: truck 12 bolt
Tire size: 235 15"
Bagged: all four corners
Running: not yet
Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=557301
Carb or FI: fuel injection
Go Fast: hope it does one day
__________________
My Projects-
http://67-72chevytrucks.com/vboard/s...d.php?t=557301
Quest for Hot Rod Power Tour 2013.

http://67-72chevytrucks.com/vboard/s...d.php?t=543735
my 85 GMC 2wd to 4wd conversion for the wife.
mrhurt73 is offline   Reply With Quote
Old 02-19-2013, 03:02 PM   #19
68Stepbed
Registered User
 
68Stepbed's Avatar
 
Join Date: Mar 2005
Location: 10-Uh-See
Posts: 5,609
Re: LSX swappers what ya got?!?!

Model: 68 C10 stepside
Motor/transmission: 2002 5.7L LS1/700R4
Fuel tank: Doc's Tanks rear mounted aluminum, Carter pump
Motor mounts: POL tubular mounted in rearward 6 position. Adv Adapters adapter kit
Tranny mount: ECE
Oil pan: F-body LS1
Radiator: Stock style aluminum
Shift linkage: column/Lokar
Exhaust manifolds: shorty headers
Gears: 4.11
Rear End: stock 12 bolt with Eaton LSD
Tire size: 255/50/17-F 275/55/17-R
Bagged: static dropped 4.5/5.75
Running: yes
Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=506692
Carb or FI: 750 Street HP carb, Edelbrock Performer RPM intake, MSD 6010 Ignition
Go Fast: 232/240 .580/.580 110+2 cam, TSP 7.4" pushrods, TSP? dual valvesprings. 2800 stall
__________________
Matt

68 C10 stepside, LS1/700R4, TCI Engineering suspension system
68Stepbed is offline   Reply With Quote
Old 02-19-2013, 03:06 PM   #20
lytemup454
Registered User
 
lytemup454's Avatar
 
Join Date: Dec 2006
Location: Pueblo West
Posts: 264
Re: LSX swappers what ya got?!?!

[B]Model: 1986 GMC
Motor/transmission: 2004 LQ4 NV4500/ round pattern NP205
Fuel tank: stock 1987 with ep381 intank pump
Motor mounts: Dirty Dingo
Tranny mount: stock 700R4
Oil pan: stock
Radiator: stock
Exhaust manifolds: Speedway motors shorty headers
Gears: 373
Rear End: 12 bolt
Tire size: 33"
Running: garage racing
Carb or FI: FI

Last edited by lytemup454; 02-19-2013 at 03:13 PM. Reason: added info
lytemup454 is offline   Reply With Quote
Old 02-19-2013, 11:51 PM   #21
Nitschke
Registered User
 
Nitschke's Avatar
 
Join Date: Jan 2009
Location: Vancouver, WA
Posts: 53
Re: LSX swappers what ya got?!?!

Here are some of the pics i have. The motor and trans are as far back and as low as i could get them with out modifying things other than mounts and trans cross member and cutting the lip out as seen in the pic. There is about 1/4 of an inch from the peak of the trans and the floor pan. It fit but barely its snug.
Posted via Mobile Device
Attached Images
     
__________________
~72 Chevy Truck~

Motor: LY6 6.0 Liter
Trans: 6L80E
Still under construction

Last edited by Nitschke; 02-20-2013 at 12:15 AM.
Nitschke is offline   Reply With Quote
Old 02-20-2013, 12:00 AM   #22
Nitschke
Registered User
 
Nitschke's Avatar
 
Join Date: Jan 2009
Location: Vancouver, WA
Posts: 53
Re: LSX swappers what ya got?!?!

Hope these help.
Posted via Mobile Device
Attached Images
     
__________________
~72 Chevy Truck~

Motor: LY6 6.0 Liter
Trans: 6L80E
Still under construction
Nitschke is offline   Reply With Quote
Old 02-20-2013, 07:48 AM   #23
OKGMC4
Registered User
 
OKGMC4's Avatar
 
Join Date: Oct 2009
Location: Broken Arrow, OK
Posts: 1,215
Re: LSX swappers what ya got?!?!

Model: 1956 GMC
Motor/transmission: 2001 5.3 / 4L60E
Fuel tank: aluminum aftermarket with silverado fuel pump
Motor mounts: custom stands to early sbc pedestal style
Tranny mount: modified 2nd gen F body cross member
Oil pan: F body LS1
Radiator: champion
Shift linkage: Lokar cable, column shift
Exhaust manifolds: 1997 Corvette
Gears: 3.07
Rear End: dana 36, 1996 corvette
Tire size: 245/45r17 front, 275/40r18 rear
Bagged: no
Running: yes
Build thread: in my sig
Carb or FI: stock efi

__________________
__________________
56 GMC BUILD THREAD:
http://67-72chevytrucks.com/vboard/s...d.php?t=368649

69/67 chevy/gmc LS powered unibody:
http://67-72chevytrucks.com/vboard/s...d.php?t=624747

One piece window conversion Blackdiesel style:
http://67-72chevytrucks.com/vboard/s...d.php?t=366078
OKGMC4 is offline   Reply With Quote
Old 02-20-2013, 10:01 AM   #24
softballnrd27
Always a work in progress
 
softballnrd27's Avatar
 
Join Date: Jun 2007
Location: Harker Heights, TX
Posts: 1,599
Re: LSX swappers what ya got?!?!

Model: 85 SWB C10
Motor/transmission: 2004 5.3/th350
Fuel tank: Stock 87, in-tank pump, -6 lines
Motor mounts: Dirty Dingo adj
Tranny mount: Stock
Oil pan: F-body
Radiator: Champion HD 3 Core with dual elec fans
Shift linkage: Stock
Exhaust manifolds: Stock 5.3 w/V-bands welded on
Gears: Stock
Rear End: Stock 10 bolt for now, 9" in the works
Tire size: 295/50/15 r, 205/75/15 f
Bagged: static
Running: Not yet still deployed, motor is waiting on me
Build thread: http://www.rwhp.us/showthread.php?11...0-Build-thread
Carb or FI: Stock FI
Go Fast: Heavy right foot for now. Twin turbo when I get back from Okinawa in 3 years. I leave in July.
__________________
USMC Retired
Never trust a man who can't laugh at his own fart!
2010 Silverado Crew Cab
73 SWB 5.3/4l80e
Build Thread:
http://67-72chevytrucks.com/vboard/s...d.php?t=695168
softballnrd27 is offline   Reply With Quote
Old 02-20-2013, 08:09 PM   #25
Shortie
Junior Member
 
Shortie's Avatar
 
Join Date: Aug 2010
Location: Fergus, Ontario
Posts: 50
Re: LSX swappers what ya got?!?!

Model: 69 c10 short box
Motor/transmission: LQ4/4l80e
Fuel tank: Stock In Cab
Motor mounts: Small Block clam shells with homemade adapters
Tranny mount: Custom piece of 1x3
Oil pan: Chopped down truck pan
Radiator: Stock 69 small block
Shift linkage: Lokar floor shifter
Exhaust manifolds: Hedman LS Conversion headers
Gears: 3.73
Rear End: 12 bolt with eaton posi
Tire size: 295/50r15
Bagged: Yep
Running: Daily Driver last year
Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=561591
Carb or FI: Fuel Injected
Go Fast: ported and milled 241s, TSP Torquer V2, 3200 stall
Shortie is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:11 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com