MY build thread...

[shortbed70]

Well heres some small progress. I got my cab corners in yesterday and got one tacked on and the piece to the left I will have to make at work tomarrow and the piece of the floor that goes down behind it. Also got alittle paint removed to weld the bed side seam up but need another way to get down in the crack better,any ideas? Heres another option I'm thinking of on the motor.

[shortbed70]

Progress as of today and a few misc pics I have and what I'm working with.

[shortbed70]

Heres what came in the mail today now just need some final wash and some thinner to clean afterwards and heres a pic of my shop and things in it.

[shortbed70]

Not much to post lately but this weekend I will have some. Getting the door handle pocket patches fabbed up and ready to cut them out and put them in and got the back of the cab ready for epoxy just waiting to get some strainers and sticks from work tomarrow and hopefully I can get at least the back of the cab primed. This build would go alot quicker if I only had more money

[neto]

"if I only had more money" You forgot time. LOL. Hey your truck is coming along nice.

[shortbed70]

Thanks for the kind words to keep me encouraged. I now see why people that get into this stuff without a plan loose intrest because it get EXPENSIVE quickly. I mean I still have to buy rage filler,2K euro primer, long blocks,two front fenders,paint\clear. And then put it back togather...Anybody interested LOL

[Rafael505]

Originally Posted by shortbed70

Not much progress lately but I almost got the motor ready to run just need starter,wp,balancer,valve covers and plugs then I'll have a video. Also got the motor in my 64 running so I can sell it to recoupe some money. Heres some pics of motor....More to come soon. Might have the old truck sold too. And I got to ride my first harley today and MAN now I want one. Spacer is for hood clearence checking...

if you dont mind me askin whats the color and code of you truck i really like it for my 67 c10

[shortbed70]

Are you wanting the motor color ? The truck is ratrod satin black from eastwood. The motor paint is a duplicolor over engine primer. Ill have to get the color if thats what your wanting.

[shortbed70]

Well bedside seams are ground down just need some fine tuning now I need to get some paint on the front inner fenders and grill and get them mounted and more welding on the bed. Pics later tonight

[65VOL]

Looking good!!!

[shortbed70]

Yea I was using one of those dagar throwing things and I thought about paint stripper and wife brush by hand but the cutoof wheel might work too. I tried to make the panel to the left of the cab corner today but one of my bends didn't line up with cab and corner enough so I will make another tomarrow and my new miller helmet took a crap this morning so now it will be this weekend before I get it back. It was a great day and a monday at that. Good thing I have a few of my favorite beverages in the fridge...

[shortbed70]

Well heres the peice I made again this one fits much better now I need to make the backing panel and then start on the other side.

[shortbed70]

Got alittle board so I did some work not much but a little progress. Got the driverside cab corner ground down and low and behold already patched kind of with alot of bondo and removed some paint from cab

[shortbed70]

Well heres todays progress,it snowed until 12 then sun came out and was 50 degrees so I got home and did some work. Enjoy. Now its on to the drivers side.

[collins10672]

shortbed70 are those the tabco cab corners?if so how do you like the fit and finish of the panel?on one truck i had i used the schott's old style cab corners(raw steel no edp coating)they look nice in the lower contour area that meets the lower rocker indentation,but were a pain where the lower edge welds to the inner rocker(lower lip was not stamped correctly.the black edp tawain made cab corners i have looked at and i am not impressed at all with the way the lower body contour is stamped.your cab corner looks great,especially the new piece you made.way to go man.thanks

[shortbed70]

I am very impressed about the fit and finish. As far as the bottom where the spotwelds are I had to make that piece in the first pic because PO didnt replace it. I had no problems lining up the body lines. Got off ebay for 33.00. I'm going to try do do the other side tomarrow. Thanks for the kind words and hopefully one day this build will take off and I can do more work but right now I'm into the detail metal replacement,JUST SAY NO TO RUST!!!

[shortbed70]

Heres some progress from tonight just a few hours after work cause I was ticked off about some things so I worked off my frustrations.

[TimE]

Lookin' good!! I wish the cab corners that I bought were formed as well as what yours look. The patches you made look real nice too!!

[shortbed70]

I'm not sure where the guy I bought them from got them but he was from arazona and they were tabco. Thanks I am trying to make sure this thing last as long as possible. I am getting to the point of seam sealing inside and epoxy priming the crap out of everything.

[bad6772]

Looks good....And from the Paint and Body Section...I got to ask a few things....Is this door original....? Have you tried reaming the Upper and Lower Door hinges out..? < this may help with the Gap issue....And one more....I have found that if you was to add the round bar ( i prefer flat stock) to the cab instead of the door it will make life much easier....This goes for mudd work and metal finishing....I like to metal finish everything before mudd..Hope this may help you....

[shortbed70]

It will get metal finished before mudd for sure and I cant move the door back anymore the door tumbler hits the cab piller behind the striker plate. This is the original door also cause the base paint is the same as the rest of the truck now if it has been removed ???? I would think round on the cab would take more work to get it to "flow" into the old metal whewre on the door I weld both sides of the round stock and can adjust the gap by removing metal but no welds. And it is the same thickness as the door skin.

[shortbed70]

Heres my made panels by hammering flat metal on the floor and now they fit just like the factory door patch would. They arent done yet I still have to clean them up and get the dimples out of them.

[shortbed70]

Got some done yesterday. Bare metal epoxy primed and man eastwood stuff is thin like spraying water. Heres a few pics.

[Alan's Classic]

Progress is lookin' great!!

[shortbed70]

Well I managed to make on heck of a mess in my shop tonight by stripping all the primer and bondo off my hood with 50 grit then 80 grit.... pics tomarrow before and after epoxy... Someone want to help clean up????????