1966 Snub-nose C60 project - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scooterbilt · 05-07-2014, 11:37 PM

We are going to soda blast both aluminum blocks as well as the intakes so the entire surface of the motors is one uniform finish as well as the allison transmission then seal them all with clear. The entire frame and motor mounts and cross members will be painted a single color.we have not decided on a color for the cab yet. The colors in the mock up or " cartoon " are there just for contrast to see the different parts. Looking forward to making some progress on this build enjoy all the feed back that we've received. Will post more pics in a few days

BigMike · 05-08-2014, 01:26 AM

Very Cool!!!

Guilty By Design · 05-09-2014, 01:54 PM

cant wait to see more!

Average Joe · 05-20-2014, 09:07 PM

Cool build!!!!!!!!!

Hankster · 05-21-2014, 10:53 PM

Just Kinda skipped threw some pages and must say this is gonna be sweet! I'll be watching this one!

Scooterbilt · 05-31-2014, 09:43 PM

I should be cutting the ladder bar parts this next week. I think we finally figured out the way we want it to look.

aggie91 · 06-03-2014, 04:23 PM

Finally a heavy hauler I can get into...Really like this extreme approach..

amueller454 · 06-23-2014, 02:41 PM

This thing is sick!

Scooterbilt · 06-24-2014, 11:26 PM

We finally got some more time to work on the ole Grain Truck. Here are the ladder bars started for the rear ends.

Hankster · 06-25-2014, 01:03 AM

Finally an update!

Scooterbilt · 06-25-2014, 01:59 AM

I am hoping to get to spend more time on it in coming weeks. We would love to be able to drive this thing to LS fest in September, even if it's not completely done.

Hankster · 06-25-2014, 02:02 AM

Quote:

Originally Posted by Scooterbilt

I am hoping to get to spend more time on it in coming weeks. We would love to be able to drive this thing to LS fest in September, even if it's not completely done.

Well best of luck to you, I know how deadlines are.. lol Keep up the great work!

61_FL_Apache · 06-25-2014, 08:04 PM

Great work!!

Ray1 · 07-08-2014, 01:31 AM

subd

**Fleet '66** · 07-28-2014, 06:57 PM

Cool Concept!!

I like it and am following along.

Scooterbilt · 07-28-2014, 10:28 PM

Hey guys, We have found a set of 10 aluminum semi wheels in 22.5. What would it take to get these wheels to fit on this grain truck? Adapters maybe?

Guilty By Design · 07-29-2014, 11:25 PM

Yes you'll need adapters. You can also keep them 22.5 and run a "low pro" semi tire or have them milled to 22" and run low pro car and truck tires. Pm me and I can help you locate a set of adapters and a place to mill the wheels.

Scooterbilt · 09-25-2014, 10:27 PM

Here you go fellas, we made a little progress, so here's a little more grain truck porn for you!

franken · 09-25-2014, 11:45 PM

Umm, what's the planned use for a C60 on the ground?

Scooterbilt · 09-26-2014, 12:07 AM

Quote:

Originally Posted by franken

Umm, what's the planned use for a C60 on the ground?

It will be used for looking cool and turning heads!! And a guy needs a truck to pull the little lawn mower trailer around doesn't he? lol

Scooterbilt · 09-26-2014, 12:16 AM

Oh, and I can't forget, because I have never seen one this big in the weeds. Not that it hasn't been done, I've just never seen it.

61_FL_Apache · 09-26-2014, 07:24 PM

One of the coolest builds out there.

duallyjams · 09-26-2014, 08:07 PM

NOWthat's a dually

Scooterbilt · 09-30-2014, 10:21 PM

This build started as an idea with no plan, we are totally making it up as we go!

_Ogre · 10-08-2014, 02:34 PM

this truck needs super singles on it $$$$$$$

05-07-2014, 11:37 PM	#126
Scooterbilt Registered User Join Date: Dec 2012 Location: Rogersville, MO Posts: 64	Re: 1966 Snub-nose C60 project We are going to soda blast both aluminum blocks as well as the intakes so the entire surface of the motors is one uniform finish as well as the allison transmission then seal them all with clear. The entire frame and motor mounts and cross members will be painted a single color.we have not decided on a color for the cab yet. The colors in the mock up or " cartoon " are there just for contrast to see the different parts. Looking forward to making some progress on this build enjoy all the feed back that we've received. Will post more pics in a few days

05-08-2014, 01:26 AM	#127
BigMike Registered User Join Date: Sep 2004 Location: Rancho Santa Margarita - SoCal Posts: 1,432	Re: 1966 Snub-nose C60 project Very Cool!!! __________________ Mike My 69 SWB Project Father/Son 72 Nova Project My Airbrushed RC Car Bodies

05-09-2014, 01:54 PM	#128
Guilty By Design Registered User Join Date: Jul 2006 Location: Joplin, Missouri Posts: 41	Re: 1966 Snub-nose C60 project cant wait to see more!

05-20-2014, 09:07 PM	#129
Average Joe Registered User Join Date: Feb 2009 Location: Southern Oregon Posts: 1,352	Re: 1966 Snub-nose C60 project Cool build!!!!!!!!! __________________ 1967 C10 Suburban 454/TH400/3.07's An Average Joe and His 'Burb: http://67-72chevytrucks.com/vboard/s...d.php?t=775843

05-21-2014, 10:53 PM	#130
Hankster Registered User Join Date: Jan 2013 Location: Nacogdoches, Texas Posts: 895	Re: 1966 Snub-nose C60 project Just Kinda skipped threw some pages and must say this is gonna be sweet! I'll be watching this one! __________________ Current Build 89 s10 ecsb 2wd 4.3/700r4 50k OG Miles Instagram- shaggin_s10 '86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt (Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD

05-31-2014, 09:43 PM	#131
Scooterbilt Registered User Join Date: Dec 2012 Location: Rogersville, MO Posts: 64	Re: 1966 Snub-nose C60 project I should be cutting the ladder bar parts this next week. I think we finally figured out the way we want it to look.

06-03-2014, 04:23 PM	#132
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 1966 Snub-nose C60 project Finally a heavy hauler I can get into...Really like this extreme approach.. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

06-23-2014, 02:41 PM	#133
amueller454 Registered User Join Date: Oct 2009 Location: Ogden, Utah Posts: 149	Re: 1966 Snub-nose C60 project This thing is sick! __________________ 1960 short bed fleetside factory 4x4 1960 panel 454 NV4500 Daily driver 1961 Short Bed BBW Fleetside 5.3 th400 swap in process

06-24-2014, 11:26 PM	#134
Scooterbilt Registered User Join Date: Dec 2012 Location: Rogersville, MO Posts: 64	Re: 1966 Snub-nose C60 project We finally got some more time to work on the ole Grain Truck. Here are the ladder bars started for the rear ends. Attached Images

06-25-2014, 01:03 AM	#135
Hankster Registered User Join Date: Jan 2013 Location: Nacogdoches, Texas Posts: 895	Re: 1966 Snub-nose C60 project Finally an update! __________________ Current Build 89 s10 ecsb 2wd 4.3/700r4 50k OG Miles Instagram- shaggin_s10 '86 Chevrolet C10 Custom Deluxe - Gen V 454 - 4l80e - welded 12 bolt (Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=611611 ) SOLD

06-25-2014, 01:59 AM	#136
Scooterbilt Registered User Join Date: Dec 2012 Location: Rogersville, MO Posts: 64	Re: 1966 Snub-nose C60 project I am hoping to get to spend more time on it in coming weeks. We would love to be able to drive this thing to LS fest in September, even if it's not completely done.

06-25-2014, 08:04 PM	#138
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,065	Re: 1966 Snub-nose C60 project Great work!! __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

07-08-2014, 01:31 AM	#139
Ray1 Registered User Join Date: Jul 2014 Location: Hastings MI Posts: 1	Re: 1966 Snub-nose C60 project subd

07-28-2014, 06:57 PM	#140
Fleet '66 Active Member Join Date: Aug 2011 Location: Salem, Oregon Posts: 112	Re: 1966 Snub-nose C60 project Cool Concept!! I like it and am following along. __________________ Fleet '66 ***************** '66 C-10 SWB 350 w/3 spd OD 4:11's - driver/project...future T-5 trans upgrade '64 C-10 LWB BBW near future project - "The Wife's Ride" '58 "Apache"Stepside BBW w/'75 K-10 4x4 conversion 331 w/350TH and NP 205 transfer 3:73's - occasional driver/ show

07-28-2014, 10:28 PM	#141
Scooterbilt Registered User Join Date: Dec 2012 Location: Rogersville, MO Posts: 64	Re: 1966 Snub-nose C60 project Hey guys, We have found a set of 10 aluminum semi wheels in 22.5. What would it take to get these wheels to fit on this grain truck? Adapters maybe?



Register or Log In To remove these advertisements.

07-29-2014, 11:25 PM	#142
Guilty By Design Registered User Join Date: Jul 2006 Location: Joplin, Missouri Posts: 41	Re: 1966 Snub-nose C60 project Yes you'll need adapters. You can also keep them 22.5 and run a "low pro" semi tire or have them milled to 22" and run low pro car and truck tires. Pm me and I can help you locate a set of adapters and a place to mill the wheels.

09-25-2014, 10:27 PM	#143
Scooterbilt Registered User Join Date: Dec 2012 Location: Rogersville, MO Posts: 64	Re: 1966 Snub-nose C60 project Here you go fellas, we made a little progress, so here's a little more grain truck porn for you! Attached Images

09-25-2014, 11:45 PM	#144
franken Registered User Join Date: Jun 2013 Location: Somewhere Posts: 3,052	Re: 1966 Snub-nose C60 project Umm, what's the planned use for a C60 on the ground?

09-26-2014, 12:16 AM	#146
Scooterbilt Registered User Join Date: Dec 2012 Location: Rogersville, MO Posts: 64	Re: 1966 Snub-nose C60 project Oh, and I can't forget, because I have never seen one this big in the weeds. Not that it hasn't been done, I've just never seen it.

09-26-2014, 07:24 PM	#147
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,065	Re: 1966 Snub-nose C60 project One of the coolest builds out there. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

09-26-2014, 08:07 PM	#148
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: 1966 Snub-nose C60 project NOWthat's a dually __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

09-30-2014, 10:21 PM	#149
Scooterbilt Registered User Join Date: Dec 2012 Location: Rogersville, MO Posts: 64	Re: 1966 Snub-nose C60 project This build started as an idea with no plan, we are totally making it up as we go!

10-08-2014, 02:34 PM	#150
_Ogre Registered User Join Date: Jan 2012 Location: Motown Posts: 7,670	Re: 1966 Snub-nose C60 project this truck needs super singles on it $$$$$$$ __________________ cool, an ogre smiley Ogre's 58 Truk build how to put your truck year and build thread into your signature shop air compressor timer

Register or Log In To remove these advertisements.