GMC Paul - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ekelzo · 10-15-2002, 12:28 AM

Ordered some rubber parts from GMC Paul on line and got them FAST! Thank you Paul, and I recommend you very highly to everyone on the board. I'll be back.
Ed Kelly

**GMCPaul** · 10-30-2002, 05:05 AM

Thanks Ed!!! We try hard to get everyones parts out the door and headed to them within 24 hours of ordering. Glad we were able to help you with your needs!!!! Truck on!!!

GMCPaul

**MikeB** · 10-30-2002, 04:33 PM

Paul, I don't think you have enough trucks. Where do you keep them all?

**68 Stepside** · 07-03-2003, 09:59 PM

I've done business with Paul a few times now, and have also met him and his "crew" in person. They're a great bunch of folks to deal with, and an even better bunch of folks to meet.

Thanks for everything Paul!

*racedvl* · 07-03-2003, 10:10 PM

Ya Paul, is a great guy to do business with! Thanks for sending 68 stepside's parts to my house!!!!!

**68 Stepside** · 07-03-2003, 10:11 PM

Remember to mention they were sent there on purpose!!

*racedvl* · 07-03-2003, 10:11 PM

**GMCPaul** · 07-04-2003, 04:29 AM

Mike B we have over 200ton of gravel spread on our property creating one of the largest driveway parking lots in the area at our home, plus we keep several at the store and a few at freinds and family at times. We always have room for more as the wallet allows though.
Your more than welcome 68 Stepside thanks for the purchase, how you gonna keep those drop disc parts off racedvl's truck with you in Florida?? TJ the rubber parts ordered last night will ship to racedvl's house on Monday ( your working on building a nice truck for racdvl if you stat in Florida to long

). Thanks Again guys!!!!!
GMCPaul

**68 Stepside** · 07-04-2003, 09:58 AM

Oh, I'm sure I'll keep those drop parts off his truck, I'm a lot bigger than he is

*racedvl* · 07-04-2003, 11:44 AM

Hey TJ, arn't ya gonna need a adjustible panhard bar for a 4" drop spring?

**68 Stepside** · 07-04-2003, 11:53 AM

Yes...I don't think Paul has em??

Longhorn Man · 07-04-2003, 12:51 PM

Just put a skinny tire on one side. It'll work.

**GMCPaul** · 07-04-2003, 05:34 PM

LOL TJ they were on the same page you found the springs on, they run $64.95 part #1061517, I always go with rear shock relocators on drops of 3" or more in the rear also for a softer ride by allowing the shocks to preform better using the relocation kit we stock.
GMCPaul

**68 Stepside** · 07-04-2003, 06:13 PM

I'm blind...

I suppose when I get my check in the bank, I'll go ahead and order that stuff. Thanks for the great customer service Paul, you've got another loyal customer on your hands now

10-30-2002, 05:05 AM	#2
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,718	Thanks Ed!!! We try hard to get everyones parts out the door and headed to them within 24 hours of ordering. Glad we were able to help you with your needs!!!! Truck on!!! GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

10-30-2002, 04:33 PM	#3
MikeB Senior Member Join Date: Jul 2000 Location: North Texas Posts: 3,425	Paul, I don't think you have enough trucks. Where do you keep them all? __________________ Mike 1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! Last edited by MikeB; 07-03-2003 at 11:40 PM.

07-03-2003, 09:59 PM	#4
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	I've done business with Paul a few times now, and have also met him and his "crew" in person. They're a great bunch of folks to deal with, and an even better bunch of folks to meet. Thanks for everything Paul! __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

07-03-2003, 10:11 PM	#6
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	Remember to mention they were sent there on purpose!! __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

07-04-2003, 04:29 AM	#8
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,718	Mike B we have over 200ton of gravel spread on our property creating one of the largest driveway parking lots in the area at our home, plus we keep several at the store and a few at freinds and family at times. We always have room for more as the wallet allows though. Your more than welcome 68 Stepside thanks for the purchase, how you gonna keep those drop disc parts off racedvl's truck with you in Florida?? TJ the rubber parts ordered last night will ship to racedvl's house on Monday ( your working on building a nice truck for racdvl if you stat in Florida to long ). Thanks Again guys!!!!! GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

10-15-2002, 12:28 AM	#1
ekelzo Not too old for R n' R Join Date: Jul 2000 Location: Manchester, CT./Leominster, MA. USA Posts: 80	GMC Paul Ordered some rubber parts from GMC Paul on line and got them FAST! Thank you Paul, and I recommend you very highly to everyone on the board. I'll be back. Ed Kelly __________________ 72 swb step L6 3sp driver / beater / project. 69 AMX 390 4sp. Big Bad Orange long term project.

07-03-2003, 10:10 PM	#5
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Ya Paul, is a great guy to do business with! Thanks for sending 68 stepside's parts to my house!!!!!

07-04-2003, 09:58 AM	#9
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	Oh, I'm sure I'll keep those drop parts off his truck, I'm a lot bigger than he is __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

07-04-2003, 11:44 AM	#10
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	Hey TJ, arn't ya gonna need a adjustible panhard bar for a 4" drop spring?

07-04-2003, 11:53 AM	#11
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	Yes...I don't think Paul has em?? __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

07-04-2003, 12:51 PM	#12
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Just put a skinny tire on one side. It'll work.

07-04-2003, 05:34 PM	#13
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,718	LOL TJ they were on the same page you found the springs on, they run $64.95 part #1061517, I always go with rear shock relocators on drops of 3" or more in the rear also for a softer ride by allowing the shocks to preform better using the relocation kit we stock. GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

07-04-2003, 06:13 PM	#14
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,692	I'm blind... I suppose when I get my check in the bank, I'll go ahead and order that stuff. Thanks for the great customer service Paul, you've got another loyal customer on your hands now __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.