VA Made a list of all the parts i have for sale--- 100's of them - Page 11 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 06-01-2010, 07:34 PM

The inners are new tri plus reproductions and would be very expensive to ship....check with Mike's Bump and Grind as he's given me excellent pricing or Tim Christian or if there's someone local to you.

I will take pics of the bracket for you but probably tomorrow night...will be home late tonight.

VA72C10 · 06-05-2010, 12:22 AM

pics of bracket tomorrow...sorry for the delay...

Camaro_nut2001 · 06-06-2010, 12:15 AM

Hey feller, do you have a complete wiring harness for the rear of my '69 C10 fleetside or do you have just the rubber plug that connects to the wiring running to the front? If you have just the plug I can wire it in to my wiring as just the plug went bad. Thank you.

VA72C10 · 06-06-2010, 01:10 AM

I think I do have just that connector...can you post a pic so I can verify which one....I've seen round or more oval ones.....

Camaro_nut2001 · 06-06-2010, 03:03 PM

Quote:

Originally Posted by VA72C10

I think I do have just that connector...can you post a pic so I can verify which one....I've seen round or more oval ones.....

Yep, here you go. Name: DSCN1685.jpg
Views: 152
Size: 54.5 KB

Name: DSCN1686.jpg
Views: 156
Size: 35.2 KB

Name: DSCN1687.jpg
Views: 147
Size: 39.4 KB

VA72C10 · 06-06-2010, 08:17 PM

sorry, just checked and all I have is the harness that plugs into that connector and runs to the rear. The only connector I have like that is on my blazer rear harness.

Camaro_nut2001 · 06-07-2010, 12:42 AM

Quote:

Originally Posted by VA72C10

sorry, just checked and all I have is the harness that plugs into that connector and runs to the rear. The only connector I have like that is on my blazer rear harness.

That's the way this is. It plugs into the feed from the front and runs the rear. I need the complete rear harness.

VA72C10 · 06-07-2010, 07:15 AM

Quote:

Originally Posted by Camaro_nut2001

That's the way this is. It plugs into the feed from the front and runs the rear. I need the complete rear harness.

I'll have to take some pics. The one I have the wires have separated...it's just a straight shot of wires with the male end of that connector on both ends.

**Arrington01** · 06-07-2010, 10:33 PM

Do you have any rear bumper brackets for a 71? Thanks Jason

VA72C10 · 06-07-2010, 10:45 PM

Quote:

Originally Posted by Arrington01

Do you have any rear bumper brackets for a 71? Thanks Jason

I have two pair but have to verify which will work with my blazer first so they're not for sale at this moment...

VA72C10 · 06-09-2010, 02:24 AM

ttt

**BIG ORANGE** · 06-09-2010, 06:08 AM

Joanathan,
What did you decide on the nicest black vent window assy. that we talked about? figure shipping also and pay through MO.
Donnie

VA72C10 · 06-09-2010, 08:38 AM

Quote:

Originally Posted by BIG ORANGE

Joanathan,
What did you decide on the nicest black vent window assy. that we talked about? figure shipping also and pay through MO.
Donnie

Sorry about that...thought I responded. Money order is fine. Shipping with insurance would be 45. Asking 225 plus shipping so 270 shipped. I do have someone from Craigslist who I offered to swap for a new chrome setup so I have to give him a day or two to respond....I will let you know. Here are the pics

69step-side · 06-09-2010, 12:28 PM

I just wanted to remind you I'm still interested in the pics for that accelerator bracket. As for inners I plan to come up your way at the end of August.

69step-side · 06-09-2010, 01:00 PM

Do you still have the original 69 radiator core support available for 250? It's in bold.

VA72C10 · 06-09-2010, 05:16 PM

Quote:

Originally Posted by 69step-side

I just wanted to remind you I'm still interested in the pics for that accelerator bracket. As for inners I plan to come up your way at the end of August.

sorry bout that...I will post the two styles of bracket tonight as well as some wiring I need to post pictures of.

VA72C10 · 06-09-2010, 05:17 PM

Quote:

Originally Posted by 69step-side

Do you still have the original 69 radiator core support available for 250? It's in bold.

I have a brand new reproduction in the box for 175 plus shipping. Sold one of my originals...can't remember if I had a second one or not...I will check tonight. I have a GMC and 67/68 one and can't remember if I have another 69-72 original...

*Cartoonface* · 06-09-2010, 07:57 PM

Holey Moley! 11 pages of stuff!!
I apologize for jumping in at the end but on your photobucket page 9, image 180 of 273 you show a crack free inner grill.....
Is it still available?
How much?
Would you ship?
( I don't need the emblem if it is of any consequence)
Thank you much,

Marty
805-478-9564

VA72C10 · 06-09-2010, 11:14 PM

sorry, I already sold that one.

blazin · 06-09-2010, 11:55 PM

do you have a mint emblem?? how much if you do?

VA72C10 · 06-10-2010, 12:45 AM

Quote:

Originally Posted by blazin

do you have a mint emblem?? how much if you do?

what kind of emblem?

VA72C10 · 06-10-2010, 01:50 AM

Here are the pedal assemblies (67-70) and 71-72 that I have

blazin · 06-10-2010, 08:18 AM

Quote:

Originally Posted by VA72C10

what kind of emblem?

the blue one for the 72 grill. i have a all new front clip... minus the emblem.

VA72C10 · 06-10-2010, 09:05 AM

I have a driver's shape one but you need a nicer one for your blazer. I'd check ebay for NOS ones or the repops seem really nice in all honesty.

69step-side · 06-10-2010, 07:46 PM

How much for the 69-70 blacker one in the first picture shipped to 29906.
Is that one in the best condition? Thanks.

06-01-2010, 07:34 PM	#251
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them The inners are new tri plus reproductions and would be very expensive to ship....check with Mike's Bump and Grind as he's given me excellent pricing or Tim Christian or if there's someone local to you. I will take pics of the bracket for you but probably tomorrow night...will be home late tonight. __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-05-2010, 12:22 AM	#252
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them pics of bracket tomorrow...sorry for the delay... __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-06-2010, 12:15 AM	#253
Camaro_nut2001 Chevy Lover Till The End. Join Date: Dec 2009 Location: Mascot TN. Posts: 795	Re: Made a list of all the parts i have for sale--- 100's of them Hey feller, do you have a complete wiring harness for the rear of my '69 C10 fleetside or do you have just the rubber plug that connects to the wiring running to the front? If you have just the plug I can wire it in to my wiring as just the plug went bad. Thank you. __________________ 1969 Chevy SWB Big Block - Under the knife as of 12/26/2011 1989 Chevy Silverado, 4X4 - Daily Driver 1996 Chevy Suburban K1500 - 4-Wheeler, Campin Truck 1968 Chevrolet Impala Sport Coupe - 327/350hp, TH400, all original. Members I've met: BamaBaxter, My Build: http://67-72chevytrucks.com/vboard/s...d.php?t=500359

06-06-2010, 01:10 AM	#254
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them I think I do have just that connector...can you post a pic so I can verify which one....I've seen round or more oval ones..... __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-06-2010, 08:17 PM	#256
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them sorry, just checked and all I have is the harness that plugs into that connector and runs to the rear. The only connector I have like that is on my blazer rear harness. __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-07-2010, 10:33 PM	#259
Arrington01 Senior Member Join Date: Feb 2008 Location: Texas Posts: 1,007	Re: Made a list of all the parts i have for sale--- 100's of them Do you have any rear bumper brackets for a 71? Thanks Jason

06-09-2010, 02:24 AM	#261
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them ttt __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-09-2010, 06:08 AM	#262
BIG ORANGE Senior Member Join Date: Oct 2001 Location: Lancaster S.C. Posts: 4,745	Re: Made a list of all the parts i have for sale--- 100's of them Joanathan, What did you decide on the nicest black vent window assy. that we talked about? figure shipping also and pay through MO. Donnie __________________ Things happen for a reason!

06-09-2010, 12:28 PM	#264
69step-side Registered User Join Date: Nov 2009 Location: Beaufort, S.C. Posts: 17	Re: Made a list of all the parts i have for sale--- 100's of them I just wanted to remind you I'm still interested in the pics for that accelerator bracket. As for inners I plan to come up your way at the end of August.

06-09-2010, 01:00 PM	#265
69step-side Registered User Join Date: Nov 2009 Location: Beaufort, S.C. Posts: 17	Re: Made a list of all the parts i have for sale--- 100's of them Do you still have the original 69 radiator core support available for 250? It's in bold.

06-09-2010, 07:57 PM	#268
Cartoonface Account Suspended Join Date: Mar 2004 Posts: 55	Re: Made a list of all the parts i have for sale--- 100's of them Holey Moley! 11 pages of stuff!! I apologize for jumping in at the end but on your photobucket page 9, image 180 of 273 you show a crack free inner grill..... Is it still available? How much? Would you ship? ( I don't need the emblem if it is of any consequence) Thank you much, Marty 805-478-9564

06-09-2010, 11:14 PM	#269
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them sorry, I already sold that one. __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-09-2010, 11:55 PM	#270
blazin Registered User Join Date: Apr 2009 Location: edmonton alberta canada Posts: 496	Re: Made a list of all the parts i have for sale--- 100's of them do you have a mint emblem?? how much if you do?

06-10-2010, 01:50 AM	#272
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them Here are the pedal assemblies (67-70) and 71-72 that I have __________________ Looking for a 67-72 swb or blazer project in or around VA.

06-10-2010, 09:05 AM	#274
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them I have a driver's shape one but you need a nicer one for your blazer. I'd check ebay for NOS ones or the repops seem really nice in all honesty. __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

06-10-2010, 07:46 PM	#275
69step-side Registered User Join Date: Nov 2009 Location: Beaufort, S.C. Posts: 17	Re: Made a list of all the parts i have for sale--- 100's of them How much for the 69-70 blacker one in the first picture shipped to 29906. Is that one in the best condition? Thanks.

Register or Log In To remove these advertisements.