VA Made a list of all the parts i have for sale--- 100's of them - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

VA72C10 · 05-16-2010, 12:47 AM

I will be around tomorrow afternoon or just let me know when and I'll try to be around...

zip is 23112 if you want to mapquest it....will get you within a couple minutes of my house.

hwes55 · 05-16-2010, 01:24 AM

Can I get your number?

Thanks Wes

VA72C10 · 05-16-2010, 01:35 AM

pm sent

*nathaniel_n85* · 05-16-2010, 05:45 AM

Editted Post, once again you may refer to the forum rules page for reasons. Thanks...

VA72C10 · 05-16-2010, 08:49 AM

If you're referring to the picture of the edelbrock carb and intake, I just threw that air cleaner on to keep dust/junk from falling into the carb while it was sitting in my garage which is also my workshop where I cut wood and tile, etc.
The carb is now in a covered container (loosely covered since I don't want any remanining fuel vapors building up).

bddcustoms · 05-16-2010, 04:45 PM

VA,

I'm interested in the A/T cross member, but will pass on the radiator core. But before you total it up, do you have a steering drag link for a '69 C/10? I don't need the tie rods, just the link.

BTW, I'm coming pass Richmond in a couple weeks (before the Fourth). Is it possible I could pick this up, rather than have you ship it? Just in cast that's not OK, send me an estimate to ship to 20715.

Thanks!

DT

VA72C10 · 05-16-2010, 05:36 PM

picking it up would be fine with me.

**NC67Chev** · 05-16-2010, 08:43 PM

Hi,
Is the "1967-72 very nice Rear sport fleetside bumper original painted white $125" still available? I'm going to be in Richmond next week for business and could pick it up.
Thanks, Mike

VA72C10 · 05-16-2010, 09:26 PM

Quote:

Originally Posted by NC67Chev

Hi,
Is the "1967-72 very nice Rear sport fleetside bumper original painted white $125" still available? I'm going to be in Richmond next week for business and could pick it up.
Thanks, Mike

I do still have it. Pm'd you my number to set up a time to stop by.

tabarcus · 05-16-2010, 09:41 PM

Mind if I make the trip from Fredericksburg to slecet the parts I need.....

Fleetside Bumpers, Tailgate, Door locks w key, Heater stuff.....

VA72C10 · 05-16-2010, 09:52 PM

I have heater stuff and door locks, but sold my tailgate and the rear bumper was just spoken for...

VA72C10 · 05-21-2010, 03:56 PM

actually I do have a repop gate available now. Never could find a box big enough for it and didn't want to piece together small boxes. NO shipping but available for local pickup.

VA72C10 · 05-21-2010, 03:59 PM

Quote:

Originally Posted by ksjh1316

Looks like I am going to need a harness after all let me know v-8 engine harness running vintage air and gages and it is a swb GMC. Let me know shipping to 67218. Thanks for the help sorry it took so long to get back to ya

The harness I had planned to ship had cut wires. I finally had time to go through my other harnesses today and found a good section of the area that was cut. It does have an extra switch where the PO had installed an under dash air conditioner. Might be able to use that wire for your vintage air. Wanted to make sure you were okay with that. If so, I will ship it out tomorrow. If not, I will refund you. Let me know. thanks and sorry for the delay.

VA72C10 · 05-21-2010, 04:01 PM

Quote:

Originally Posted by JMac11

V8 AC Guages harness? Black 72 Arm Rest?

The harness that I thought had A/C was an aftermarket under dash A/C and not factory. However, I have five or six other harnesses. Do you have a picture of the correct connector for the factory a/c to see if I have the correct harness? If I don't I will refund your money. Sorry for the delay and any inconvenience.

**JMac11** · 05-21-2010, 07:27 PM

WHich connector? The compressor line will be grafted to an LT1 compessor.... the rest will be 72 Blazer. Just let me know.

VA72C10 · 05-21-2010, 07:38 PM

i was wondering what the factory color wire and connector is for A/C to make sure I have a correct harness to start with for you.
I'll try to look at my book at the wiring details tomorrow if you don't know off hand.

**JMac11** · 05-21-2010, 08:06 PM

Coming out of the firewall on the Passenger siDE I have a black, a green and a purple wire coming out. I am almost 100% sure the green and black ent to the compressor. THe purple went to the fan.

b&a72 · 05-22-2010, 11:31 PM

Do you still have some column shift auto steering colums?

VA72C10 · 05-23-2010, 12:43 AM

yes, tilt and non-tilt

b&a72 · 05-23-2010, 01:36 AM

Is the tilt OEM 67-72 or a van tilt? Could you get some picks for me? I need one that is in good shape and does not need to be rebuilt. Thanks!

VA72C10 · 05-23-2010, 03:05 PM

It's an OEM tilt. I will get better pictures but the tilt is tight with all the levers, indicator, and good uncut wiring. Turn signal cam seems good. Came out of a cheyenne super longbed that had every option in it (Wish i would have gotten ahold of the guy before he started parting it out- had already sold the cab but it hadn't been removed yet).

Franticjen · 05-23-2010, 09:11 PM

Hi,would you have an upper alternator bracket for a 70 or 71 chevy with a big block swp,it mounts on the driver side.Thanks Fran

oldblue1968chevy · 05-23-2010, 09:19 PM

Hey VA got any of those U bolts in the mail yet,, thanks!!

VA72C10 · 05-23-2010, 09:49 PM

Quote:

Originally Posted by Franticjen

Hi,would you have an upper alternator bracket for a 70 or 71 chevy with a big block swp,it mounts on the driver side.Thanks Fran

sorry, BB stuff is sold.

VA72C10 · 05-23-2010, 09:50 PM

Quote:

Originally Posted by oldblue1968chevy

Hey VA got any of those U bolts in the mail yet,, thanks!!

I actually haven't found the nuts for the bottom. I'll go look right now and if not, order some and ship to you.

05-16-2010, 12:47 AM	#201
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them I will be around tomorrow afternoon or just let me know when and I'll try to be around... zip is 23112 if you want to mapquest it....will get you within a couple minutes of my house. __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-16-2010, 01:24 AM	#202
hwes55 Say hello to my little friend! Join Date: Apr 2010 Location: New Hill, NC Posts: 30	Re: Made a list of all the parts i have for sale--- 100's of them Can I get your number? Thanks Wes

05-16-2010, 01:35 AM	#203
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them pm sent __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-16-2010, 05:45 AM	#204
nathaniel_n85 Account Suspended Join Date: Jun 2007 Location: Newman, Illinois Posts: 26	Re: Made a list of all the parts i have for sale--- 100's of them Editted Post, once again you may refer to the forum rules page for reasons. Thanks... Last edited by msgross; 08-12-2010 at 07:36 PM. Reason: comments not relating to thread

05-16-2010, 08:49 AM	#205
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them If you're referring to the picture of the edelbrock carb and intake, I just threw that air cleaner on to keep dust/junk from falling into the carb while it was sitting in my garage which is also my workshop where I cut wood and tile, etc. The carb is now in a covered container (loosely covered since I don't want any remanining fuel vapors building up). __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-16-2010, 04:45 PM	#206
bddcustoms Registered User Join Date: Apr 2009 Location: Bowie, Maryland Posts: 80	Re: Made a list of all the parts i have for sale--- 100's of them VA, I'm interested in the A/T cross member, but will pass on the radiator core. But before you total it up, do you have a steering drag link for a '69 C/10? I don't need the tie rods, just the link. BTW, I'm coming pass Richmond in a couple weeks (before the Fourth). Is it possible I could pick this up, rather than have you ship it? Just in cast that's not OK, send me an estimate to ship to 20715. Thanks! DT __________________ broke d!@k dog Garage 1969 C20 - Project: "Big Sexy" [http://67-72chevytrucks.com/vboard/s...d.php?t=454894] 2003 'Burban - [Big Pop's daily driver] 1969 350/350 Stingray - [as soon as the economy turns...] 1939 Chevy Roadster Pick Up - Project: "Pre-School" (searching now)

05-16-2010, 05:36 PM	#207
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them picking it up would be fine with me. __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-16-2010, 08:43 PM	#208
NC67Chev Senior Member Join Date: Oct 2009 Location: Greensboro, NC Posts: 698	Re: Made a list of all the parts i have for sale--- 100's of them Hi, Is the "1967-72 very nice Rear sport fleetside bumper original painted white $125" still available? I'm going to be in Richmond next week for business and could pick it up. Thanks, Mike __________________ 1967 Chevy C-10, 250 L6, Powerglide, 3.73, SWB, Fleetside Upgrades: Power steering, Offset air cleaner, Rear Sport bumper, 3 point safety belts, HEI, -1/-2 springs, 16x5 wheels, McGaughy's disc brake conversion, Sway bar

05-16-2010, 09:41 PM	#210
tabarcus 72ChevyStep Join Date: Jun 2009 Location: Fredericksburg, VA Posts: 545	Re: Made a list of all the parts i have for sale--- 100's of them Mind if I make the trip from Fredericksburg to slecet the parts I need..... Fleetside Bumpers, Tailgate, Door locks w key, Heater stuff.....

05-16-2010, 09:52 PM	#211
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them I have heater stuff and door locks, but sold my tailgate and the rear bumper was just spoken for... __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-21-2010, 03:56 PM	#212
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them actually I do have a repop gate available now. Never could find a box big enough for it and didn't want to piece together small boxes. NO shipping but available for local pickup. __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-21-2010, 07:27 PM	#215
JMac11 Registered User Join Date: May 2005 Location: Tallahassee Fl Posts: 773	Re: Made a list of all the parts i have for sale--- 100's of them WHich connector? The compressor line will be grafted to an LT1 compessor.... the rest will be 72 Blazer. Just let me know.

05-21-2010, 07:38 PM	#216
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them i was wondering what the factory color wire and connector is for A/C to make sure I have a correct harness to start with for you. I'll try to look at my book at the wiring details tomorrow if you don't know off hand. __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-21-2010, 08:06 PM	#217
JMac11 Registered User Join Date: May 2005 Location: Tallahassee Fl Posts: 773	Re: Made a list of all the parts i have for sale--- 100's of them Coming out of the firewall on the Passenger siDE I have a black, a green and a purple wire coming out. I am almost 100% sure the green and black ent to the compressor. THe purple went to the fan. Last edited by JMac11; 05-21-2010 at 08:08 PM. Reason: Mistake

05-22-2010, 11:31 PM	#218
b&a72 Active Member Join Date: Oct 2006 Location: Mesa, AZ Posts: 682	Re: Made a list of all the parts i have for sale--- 100's of them Do you still have some column shift auto steering colums?



Register or Log In To remove these advertisements.

05-23-2010, 12:43 AM	#219
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them yes, tilt and non-tilt __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-23-2010, 01:36 AM	#220
b&a72 Active Member Join Date: Oct 2006 Location: Mesa, AZ Posts: 682	Re: Made a list of all the parts i have for sale--- 100's of them Is the tilt OEM 67-72 or a van tilt? Could you get some picks for me? I need one that is in good shape and does not need to be rebuilt. Thanks!

05-23-2010, 03:05 PM	#221
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them It's an OEM tilt. I will get better pictures but the tilt is tight with all the levers, indicator, and good uncut wiring. Turn signal cam seems good. Came out of a cheyenne super longbed that had every option in it (Wish i would have gotten ahold of the guy before he started parting it out- had already sold the cab but it hadn't been removed yet). __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-23-2010, 09:11 PM	#222
Franticjen Registered User Join Date: May 2010 Location: Warren ohio Posts: 1	Re: Made a list of all the parts i have for sale--- 100's of them Hi,would you have an upper alternator bracket for a 70 or 71 chevy with a big block swp,it mounts on the driver side.Thanks Fran

05-23-2010, 09:19 PM	#223
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: Made a list of all the parts i have for sale--- 100's of them Hey VA got any of those U bolts in the mail yet,, thanks!! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

Register or Log In To remove these advertisements.