1/2" Parker Air Valves for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

fastbagged68 · 03-27-2003, 12:01 PM

Sorry guys it's in the rwrong section but thought this would get more looks here. I have 4 Parker 1/2" Valves with a 1/2" Orfice. They are rated over 300psi. Still in the boxes, never used. I will let them go for $200 for a set. Check out what they retail for at www.excentrixauto.com These valves are very fast. I dont know the flow rates on them. A friend has got the same valves on his truck and I could show movies of how fast the system is.

orange72 · 03-27-2003, 03:41 PM

i aint trying to push my luck or anything but if you dont get a buyer will you take 150?

fastbagged68 · 03-27-2003, 03:49 PM

No - I wont sell them for less then 200. I'll just keep if no one wants to pay for them. They retail for 79-89 bucks apiece. I feel 200 if fair.

orange72 · 03-27-2003, 03:52 PM

oh i know its a fair price but it was worth a shot

orange72 · 03-27-2003, 05:38 PM

fastbagged you wouldnt know anyone who has some bags for sell for a resonable price would you?

fastbagged68 · 03-27-2003, 06:04 PM

Orange what kind of bags you looking for. I just got done bagging a 52 chevy that allready had bags but the mounts were wrong. They are small I believe they are 2500#. I also have Airlift 2b7 Ext that retail for 135 a piece I would sell them for 100 bucks each 400 hundred for the set. I'll check to se what else i have.

orange72 · 03-27-2003, 07:53 PM

how much would you take for the used 2500#si think they would be allright for the rear of my truck.

orange72 · 03-27-2003, 07:54 PM

or are they used?

XXL · 03-27-2003, 08:14 PM

Quote:

Originally posted by fastbagged68
www.excentrixauto.com

I surfed over to this place and saw their switch boxes... they don't have any real descriptions of any of their stuff. If anyone knows... does the 5-switch box do 4 corners independently plus a master up/down? What about the 7 and 9-switch units? What's on the other end of their logic circuit (I'm ASSuming they're using some kind of logic circuit and not just a bunch of messy relays and diodes)? Bare wires that run to the solenoids? Anyone ever used one of these controllers? It might be a solution to my dash dilemma... I could just toss the controller under the seat or something.

Kenneth

orange72 · 03-27-2003, 09:53 PM

oh and on those bags, what size ports do they have? i was in a hurry earlier and forgot to ask.

70 Jimmy · 03-27-2003, 11:37 PM

Phat customs quoted me $131 to the door for a pair of #2600 bags. That's $262 for 4. Maybe there is a difference in brand. Not trying to be a jerk, just curious as to why you want $400 for these?

chevy2racr · 03-28-2003, 01:02 AM

fast- could ya PM me home much it'd cost to get them to zip code 50162?

fastbagged68 · 03-28-2003, 01:54 PM

400 For the easystreet bags. NOT Firestone. The bags that retail for 135 are 1/2 port. Check them out on www.airliftcompany.com. I too could do about the same price on firestone bags.

Chevy Wrench · 03-30-2003, 04:55 PM

Did you sell those valves? Sent PM a couple of days ago. If not, lets talk biz.

*Shane* · 03-30-2003, 11:21 PM

Are the valves still for sale??

fastbagged68 · 03-31-2003, 12:06 PM

I still have them. I also have some 1/2" Blitzluft Valves to. Those I will sell for 55 apiece.

fastbagged68 · 03-31-2003, 02:30 PM

TTT

fastbagged68 · 03-31-2003, 08:09 PM

TTT

03-27-2003, 12:01 PM	#1
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	1/2" Parker Air Valves for sale Sorry guys it's in the rwrong section but thought this would get more looks here. I have 4 Parker 1/2" Valves with a 1/2" Orfice. They are rated over 300psi. Still in the boxes, never used. I will let them go for $200 for a set. Check out what they retail for at www.excentrixauto.com These valves are very fast. I dont know the flow rates on them. A friend has got the same valves on his truck and I could show movies of how fast the system is.

03-27-2003, 03:52 PM	#4
orange72 Registered User Join Date: Sep 2000 Location: huntington,texas,united states Posts: 399	oh i know its a fair price but it was worth a shot __________________ 1972 chevy long bed. Currently under construction!! Bagged, 383/700r4.

03-27-2003, 05:38 PM	#5
orange72 Registered User Join Date: Sep 2000 Location: huntington,texas,united states Posts: 399	fastbagged you wouldnt know anyone who has some bags for sell for a resonable price would you? __________________ 1972 chevy long bed. Currently under construction!! Bagged, 383/700r4.

03-27-2003, 07:53 PM	#7
orange72 Registered User Join Date: Sep 2000 Location: huntington,texas,united states Posts: 399	how much would you take for the used 2500#si think they would be allright for the rear of my truck. __________________ 1972 chevy long bed. Currently under construction!! Bagged, 383/700r4.

03-27-2003, 07:54 PM	#8
orange72 Registered User Join Date: Sep 2000 Location: huntington,texas,united states Posts: 399	or are they used? __________________ 1972 chevy long bed. Currently under construction!! Bagged, 383/700r4.

03-27-2003, 03:41 PM	#2
orange72 Registered User Join Date: Sep 2000 Location: huntington,texas,united states Posts: 399	i aint trying to push my luck or anything but if you dont get a buyer will you take 150? __________________ 1972 chevy long bed. Currently under construction!! Bagged, 383/700r4.

03-27-2003, 03:49 PM	#3
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	No - I wont sell them for less then 200. I'll just keep if no one wants to pay for them. They retail for 79-89 bucks apiece. I feel 200 if fair.

03-27-2003, 06:04 PM	#6
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	Orange what kind of bags you looking for. I just got done bagging a 52 chevy that allready had bags but the mounts were wrong. They are small I believe they are 2500#. I also have Airlift 2b7 Ext that retail for 135 a piece I would sell them for 100 bucks each 400 hundred for the set. I'll check to se what else i have.

03-27-2003, 09:53 PM	#10
orange72 Registered User Join Date: Sep 2000 Location: huntington,texas,united states Posts: 399	oh and on those bags, what size ports do they have? i was in a hurry earlier and forgot to ask. __________________ 1972 chevy long bed. Currently under construction!! Bagged, 383/700r4.

03-27-2003, 11:37 PM	#11
70 Jimmy aka Crusher, Crushergmc Join Date: Mar 2000 Location: Oregon Posts: 1,834	Phat customs quoted me $131 to the door for a pair of #2600 bags. That's $262 for 4. Maybe there is a difference in brand. Not trying to be a jerk, just curious as to why you want $400 for these? __________________ "KEEP IT DOWN!" 70 Jimmy 454 2wd 56 GMC Big Window "It's funny till someone gets hurt, then it's freakin' hilarious"

03-28-2003, 01:02 AM	#12
chevy2racr So Many Ideas, So Little Money Join Date: Sep 2001 Location: Marshalltown, IA Posts: 1,610	fast- could ya PM me home much it'd cost to get them to zip code 50162? __________________ 72 Blazer 3/4 ton running gear 4.10s NP205/TH350 350 4in lift half doors 71 C10 with 454 99 S-10 5.1L SBC 700R4 09 Malibu Marshalltown, Iowa

03-28-2003, 01:54 PM	#13
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	400 For the easystreet bags. NOT Firestone. The bags that retail for 135 are 1/2 port. Check them out on www.airliftcompany.com. I too could do about the same price on firestone bags.

03-30-2003, 04:55 PM	#14
Chevy Wrench former desert rat Join Date: Feb 2003 Location: salt lake city, utah Home of the 3 M's Mormons, methlabs and minivans Posts: 320	Did you sell those valves? Sent PM a couple of days ago. If not, lets talk biz. __________________ 94 Chevy Silverado Ext cab 4/6 drop w/ 18's and 2500watt system (work truck). 67 Chevy swb under const. frame off custom, 20's, bagged and a large rat under the hood,and a 1940 Chevy truck under const.

03-30-2003, 11:21 PM	#15
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Are the valves still for sale??

03-31-2003, 12:06 PM	#16
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	I still have them. I also have some 1/2" Blitzluft Valves to. Those I will sell for 55 apiece.



Register or Log In To remove these advertisements.

03-31-2003, 02:30 PM	#17
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	TTT

03-31-2003, 08:09 PM	#18
fastbagged68 Registered User Join Date: Jun 2002 Location: Tri Valley California Posts: 792	TTT

Register or Log In To remove these advertisements.