|
02-10-2013, 11:02 PM
|
#1 |
|
Registered User
 
Join Date: Aug 2012
Location: 704 NC
Posts: 35
|
That Kid's Build
calling this project "Crunch Time" as it's one of my biggest priorities to have this thing done asap.
EDIT Noticed the pictures are enormous mods is there anyway i can fix this? To start off I've had this truck since last august but just now have the space an time to get it done. Since we don't have a shop that doesn't have something in it in the beginning of January my dad was kind enough to buy my grandpa's old bodyshop and since then we've been rennovating it. Just last Saturday i got the truck in and most of the parts and got to work on the spindles. I've learned alot from the forum already and hopefully I'll have more to contribute when its all done. Anyway heres some photos of the shop, still in progress; and the truck. The shop    Lines for Le Toilete  And the truck: 1970 CST C10 SWB W/ ECE 4/6      Some work from tonight on the spindles    still have to do one more coat and the tie rods Plans for the truck are Fast-Burn 350/ T56 or TH400 20x8.5 and 20x10 Black Boss 338s A very loud audio system and much more. also undecided on paint These are a few of the colors I'm into right now 1. Satin Black  2. Black/ White two tone, courtesy of big al 3. Blue/ White two tone, more period correct. youtube vid 4. Red/ White two tone Sorry for the long post but I'm full throttle on this right now some opinions would be appreciated. And one question to run my 4/6 would I need a notch in the frame like this one from cpp? 
__________________
17 with a milling machine. 02 Sierra SLT Z71 ECSB lots of aftermarket 70 C-10 CST ECE 4/6 (building) Last edited by No ID; 02-12-2013 at 11:25 PM. |
|
|
|
02-11-2013, 01:56 AM
|
#2 |
|
Registered User
Join Date: Apr 2011
Location: Mustang, Oklahoma
Posts: 2,807
|
Re: That Kid's Build
Great looking project, I like the white/blue/white/blue. Like the red and white one but blue where the red is if that makes any sense. That is a great shop you have there, I wish I had a shop like that to work in! I will be watching.
I usually resize my pics to 640x480, but yours looks fine on my screen. PS- Can I borrow some tools, and maybe a chain and a jack?? 
__________________
Dan <---(my name) 67 SWB C10 project "GEORGIA"-59 Brookwood 2dr wag...Next project-03 Tahoe 4x4 5.3 family ride-07 Hondur Accord, commuter car |
|
|
|
|
02-12-2013, 07:30 PM
|
#3 |
|
Registered User
Join Date: Aug 2012
Location: 704 NC
Posts: 35
|
Re: That Kid's Build
Yea i'm really partial to the blue and i'm pretty sure it will be in my paint no matter what scheme i have. My grandpa wrote that on the wall after someone was late with returning some tools, and more specifically with the end part my uncle with a jack and chains for his weekend warrior I still find it funny though.
__________________
17 with a milling machine. 02 Sierra SLT Z71 ECSB lots of aftermarket 70 C-10 CST ECE 4/6 (building) |
|
|
|
|
02-12-2013, 11:09 PM
|
#4 |
|
more ideas than money
Join Date: Dec 2008
Location: spring grove, pa
Posts: 1,068
|
Re: That Kid's Build
Ahh..... I remember when my shop was that clean and room was plentiful!
My opinion on color is also the blue/white two tone. You have a nice truck to start with and a good area to work in, I look forward to seeing the rest of your build.
__________________
 Randy1948 Chevy 3100 5 window 1966 Chevy C30 Dually 1967 Chevy K10 1972 Chevy K20 1972 Chevy C10 1972 Chevy K5 Blazer 1987 Chevy V10 2003 Chevy Suburban |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
