|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-01-2011, 02:47 AM
|
#1 |
|
Registered User
 
Join Date: Jul 2009
Location: Santa Maria, CA
Posts: 56
|
Turn signals not canceling
Left turn signal stays on after completing turn. Right turn signal cancels like it should after turn. All bulbs are good. I have never had the steering wheel off, Is there a spring in there that broke that is causing this? Its a 72 Blazer Thanks Jim
|
|
|
|
07-01-2011, 02:51 AM
|
#2 |
|
~Rest In Peace~
Join Date: May 2005
Location: CALIFORNIA NOR CAL
Posts: 9,707
|
Re: Turn signals not canceling
possible the plastic clip broke off on the cancell switch inside of the steering hub .easy fix
is it a tilt wheel those are a little tricky to work on
__________________
is it fast ? it has a lighting bolt donut? B___H please, I can remove 90% of your so called "beauty" with a kleenex |
|
|
|
|
07-01-2011, 03:59 AM
|
#3 |
|
Registered User
Join Date: Jul 2009
Location: Santa Maria, CA
Posts: 56
|
Re: Turn signals not canceling
No tilt column
|
|
|
|
|
07-01-2011, 10:21 AM
|
#4 |
|
20' Daredevil (Ret)
Join Date: May 2003
Location: Jefferson State
Posts: 13,498
|
Re: Turn signals not canceling
There are little wire springs that cancel the turn signals, and when they break (the bent ends will snap off), the signals won't cancel. Left spring is a mirror image of the right spring. Hardest part is pulling off the steering wheel -- the springs are easy to replace. My local NAPA carries them, and I suppose any parts house does also.
EDIT: found a pic: 
__________________
- Mike - 1972 K20 LWB 350/350/205 RIP El Jay Last edited by Stocker; 07-01-2011 at 10:24 AM. |
|
|
|
|
07-01-2011, 12:41 PM
|
#5 |
|
member #16
 
Join Date: Dec 1999
Location: Yuba City Ca.
Posts: 3,618
|
Re: Turn signals not canceling
Heres a pic of them installed.
__________________
john http://67-72chevytrucks.com/vboard/showgroups.php board vendors  http://www.flickr.com/photos/1745471...7602865984234/ |
|
|
|
|
07-02-2011, 03:36 AM
|
#6 |
|
Registered User
Join Date: Jul 2009
Location: Santa Maria, CA
Posts: 56
|
Re: Turn signals not canceling
You guys are great with the pictures.... Thank you
|
|
|
|
|
07-02-2011, 01:39 PM
|
#7 |
|
Old Skool Club
Join Date: Jun 2001
Location: Benton, AR "The Heart of Arkansas"
Posts: 10,880
|
Re: Turn signals not canceling
Some people will accidently break the cam by holding the turn signal lever while turning the wheel....
__________________
Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was. |
|
|
|
|
07-02-2011, 08:22 PM
|
#8 |
|
Registered User
Join Date: Sep 2008
Location: Mobile, Al.
Posts: 687
|
Re: Turn signals not canceling
My turn signal switch did the same thing, I sprayed a 1/8th can of silicone lube in the turn switch and after a little use mine started working.
|
|
|
|
|
07-04-2011, 04:05 AM
|
#9 |
|
toys'r'us
Join Date: Nov 2010
Location: Penticton, BC, Canada
Posts: 347
|
Re: Turn signals not canceling
on day in the quiet down town i put on my right turn signal and the spring broke and completed the horn circuit!!! sooo embarassing
__________________
71 jimmy bone stock 350 sm465 33x12.5 rallies 79 caprice landau full load crate350 th350 lowered 20"wires 00 f150 reg cab sb 4x4 5.4L |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
