The 60-66 "PAYING IT FORWARD" thread! - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

loosenutz · 07-08-2020, 08:37 PM

These items have been claimed - no longer available

aggie91 · 07-10-2020, 10:25 AM

Quote:

Originally Posted by loosenutz

Free for pickup only in San Diego

1966 column shift automatic column

Filler pieces from around the radiator

Manual steering box

I'll give it a couple weeks before throwing them out

I am really interested in all these parts. Do you have a Fastenal store near you? I know that parts can be shipped through them if you are willing to box them up.

I wonder what shipping would cost for all that in one box long enough to hold the column?

loosenutz · 07-27-2020, 12:56 PM

Your inbox is full. Can't message you

Quote:

Originally Posted by aggie91

I am really interested in all these parts. Do you have a Fastenal store near you? I know that parts can be shipped through them if you are willing to box them up.

I wonder what shipping would cost for all that in one box long enough to hold the column?

aggie91 · 07-28-2020, 10:40 AM

Quote:

Originally Posted by loosenutz

These items have been claimed - no longer available

Quote:

Originally Posted by loosenutz

Your inbox is full. Can't message you

Fixed my inbox.

**sofilofi** · 09-25-2020, 07:36 PM

Anybody want a 63-66 aftermarket front bumper? Pick-up only in Whittier CA.
Bumper is gone.

studeclunker · 07-10-2020, 02:50 PM

Quote:

Originally Posted by loosenutz

Free for pickup only in San Diego

1966 column shift automatic column

Filler pieces from around the radiator

Manual steering box

I'll give it a couple weeks before throwing them out

What Part of town are you in or are you in one of the outlying 'burbs?

loosenutz · 07-10-2020, 03:13 PM

Quote:

Originally Posted by studeclunker

What Part of town are you in or are you in one of the outlying 'burbs?

I'm in Mira Mesa

**72cs20** · 07-26-2020, 01:40 PM

Hello all, I have some items here that I'd to go to a new home. Must be picked up in person, here in Los Gatos, CA. No shipping.

1. Five 8 lug 17.5, 4 clip tubeless wheels with 4 hub caps. These came off my 62 C20.

2. One 8 lug 16 inch split rim. Came off my 66 K20.

3. Big custom Barden type rear bumper. Came off the 62 C20.

4. Bench seat out of the 66 K20. Needs a refurb, but useable as is.

For pics of the 17.5 wheels, caps and bumper when they were still on the 62 C20, go here - http://67-72chevytrucks.com/vboard/s...d.php?t=703157

oem4me · 07-26-2020, 03:31 PM

Quote:

Originally Posted by 72cs20

Hello all, I have some items here that I'd to go to a new home. Must be picked up in person, here in Los Gatos, CA. No shipping.

1. Five 8 lug 17.5, 4 clip tubeless wheels with 4 hub caps. These came off my 62 C20.

4. Bench seat out of the 66 K20. Needs a refurb, but useable as is.

For pics of the 17.5 wheels, caps and bumper when they were still on the 62 C20, go here - http://67-72chevytrucks.com/vboard/s...d.php?t=703157

I'd love to have those 17.5 wheels for my own 62 C20. I need to figure a way to have them picked up from you. Are the old tires still mounted?

goatless · 10-07-2021, 02:26 PM

Time to get rid of some items taking space.

All of these are for a 1964 C10:

* Two new front brake drums - Napa 440-1071
* New Brake shoes - Napa TS-280
* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar

1966burb · 10-14-2021, 11:13 AM

PM sent on brake drums.

goatless · 10-14-2021, 05:25 PM

@1966burb: Could not figure out how to attach an image in a message reply, so they are here:
Name: IMG_8142.jpg
Views: 666
Size: 55.8 KB

Name: IMG_8141.jpg
Views: 682
Size: 66.9 KB

1966burb · 10-15-2021, 06:12 PM

Thanks for the pics. Sent another PM. J

Pick121 · 10-19-2021, 12:55 PM

Quote:

Originally Posted by goatless

Time to get rid of some items taking space.

All of these are for a 1964 C10:

* Two new front brake drums - Napa 440-1071
* New Brake shoes - Napa TS-280
* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar

Sent PM for brake shoes & drums

goatless · 10-30-2021, 01:36 AM

Time to get rid of some items taking space.

These either came of a 1964 C10, or were used on one:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Used manual steering box. Worked when removed.
* Highly massaged, cheap BBC hugger headers. Many, many dents. If you positively, absolutely need BBC hugger headers to tide you over until something better is off-loaded off of a container ship in SoCal, that's what these are.

ACK · 10-30-2021, 11:50 AM

Quote:

Originally Posted by goatless

Time to get rid of some items taking space.

These either came of a 1964 C10, or were used on one:

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Used manual steering box. Worked when removed.
* Highly massaged, cheap BBC hugger headers. Many, many dents. If you positively, absolutely need BBC hugger headers to tide you over until something better is off-loaded off of a container ship in SoCal, that's what these are.

Thanks for paying it forward! I'm interested in the steering box if you're okay with shipping and if shipping isn't crazy (crazy being more than $30), would ship to 19053 in PA. If all items are pick up only, not a problem.

goatless · 10-31-2021, 10:00 PM

Quote:

Originally Posted by ACK

Thanks for paying it forward! I'm interested in the steering box if you're okay with shipping and if shipping isn't crazy (crazy being more than $30), would ship to 19053 in PA. If all items are pick up only, not a problem.

Sorry, I'd rather not have to ship anything. Hopefully, there is a manual steering box a little closer to you.

**The Rocknrod** · 11-29-2021, 03:41 PM

Sold!

blacknwhitedog · 12-04-2021, 10:39 AM

283 block, heads, crank, rods and pistons, along with a bare th350 case. Block is standard bore and has been chemically cleaned. Used for chassis setup, no longer needed. No shipping. Come and get it. Valve covers not included.

**1971 GMC SHORTY** · 12-04-2021, 12:40 PM

Quote:

Originally Posted by blacknwhitedog

283 block, heads, crank, rods and pistons, along with a bare th350 case. Block is standard bore and has been chemically cleaned. Used for chassis setup, no longer needed. No shipping. Come and get it. Valve covers not included.

We’re Are You located Thanks
Posted via Mobile Device

blacknwhitedog · 12-04-2021, 02:15 PM

Quote:

Originally Posted by 1971 GMC SHORTY

We’re Are You located Thanks
Posted via Mobile Device

I'm in Sonoma around 50 miles north of San Francisco.

goatless · 12-09-2021, 05:43 PM

* Used master cylinder - Single reservoir original type
* Approximately 2 year old used master cylinder - Single reservoir original type
* Used OEM track bar
* Used manual steering box. Worked when removed. - Gone
* Highly massaged, cheap BBC hugger headers. Many, many dents. If you positively, absolutely need BBC hugger headers to tide you over until something better is off-loaded off of a container ship in SoCal, that's what these are.
* Like-new 1960 Shop truck manual - Gone

Local pickups, only.

“Gone” means picked-up and saved from a landfill.

60short · 12-09-2021, 07:27 PM

Id like the shop manual, and the steering box if still available.

I have a job interview in Palo Alto on Friday afternoon, but would be headed down south through Mountain View if I could pick up on Saturday AM.

Thanks,
Keith

goatless · 12-09-2021, 08:47 PM

Quote:

Originally Posted by 60short

Id like the shop manual, and the steering box if still available.

I have a job interview in Palo Alto on Friday afternoon, but would be headed down south through Mountain View if I could pick up on Saturday AM.

Thanks,
Keith

PM sent.
Posted via Mobile Device

**72cs20** · 01-13-2022, 11:53 PM

I have two good original wire harnesses that need new homes. One from a 66 K20 and one from a 62 C20. The wires and connectors are in good condition. They both have the dash and engine portions. Neither one has a complete harness to the rear.

The 66 had gauges and hazard light switch. The 62 had idiot lights.

07-08-2020, 08:37 PM	#1
loosenutz Registered User Join Date: Jul 2019 Location: San Diego Posts: 73	Re: The 60-66 "PAYING IT FORWARD" thread! These items have been claimed - no longer available Attached Images __________________ 1966 C10 SWB BBW LM4 4L60E Build 1966 Pro Touring Chevy II Build Last edited by loosenutz; 07-13-2020 at 07:55 PM.

09-25-2020, 07:36 PM	#5
sofilofi Junior Member Join Date: Dec 2011 Location: Whittier CA Posts: 78	Re: The 60-66 "PAYING IT FORWARD" thread! Anybody want a 63-66 aftermarket front bumper? Pick-up only in Whittier CA. Bumper is gone. Attached Images Last edited by sofilofi; 09-28-2020 at 10:47 PM. Reason: Gave away.

07-26-2020, 01:40 PM	#8
72cs20 Senior Member Join Date: Jul 2014 Location: Los Gatos, Ca. Posts: 407	Re: The 60-66 "PAYING IT FORWARD" thread! Hello all, I have some items here that I'd to go to a new home. Must be picked up in person, here in Los Gatos, CA. No shipping. 1. Five 8 lug 17.5, 4 clip tubeless wheels with 4 hub caps. These came off my 62 C20. 2. One 8 lug 16 inch split rim. Came off my 66 K20. 3. Big custom Barden type rear bumper. Came off the 62 C20. 4. Bench seat out of the 66 K20. Needs a refurb, but useable as is. For pics of the 17.5 wheels, caps and bumper when they were still on the 62 C20, go here - http://67-72chevytrucks.com/vboard/s...d.php?t=703157 Attached Images __________________ 1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583

10-07-2021, 02:26 PM	#10
goatless Registered User Join Date: Oct 2015 Location: Mountain View Posts: 121	Re: The 60-66 "PAYING IT FORWARD" thread! Time to get rid of some items taking space. All of these are for a 1964 C10: * Two new front brake drums - Napa 440-1071 * New Brake shoes - Napa TS-280 * Used master cylinder - Single reservoir original type * Approximately 2 year old used master cylinder - Single reservoir original type * Used OEM track bar Attached Images __________________ 1964 C10 LWB->SWB, 283->454, SM420->200-4R MECHANIC: "ME" Last edited by goatless; 10-07-2021 at 02:27 PM. Reason: Added pics

10-14-2021, 11:13 AM	#11
1966burb Registered User Join Date: Jul 2013 Location: Maltby WA Posts: 435	Re: The 60-66 "PAYING IT FORWARD" thread! PM sent on brake drums.

10-14-2021, 05:25 PM	#12
goatless Registered User Join Date: Oct 2015 Location: Mountain View Posts: 121	Re: The 60-66 "PAYING IT FORWARD" thread! @1966burb: Could not figure out how to attach an image in a message reply, so they are here: __________________ 1964 C10 LWB->SWB, 283->454, SM420->200-4R MECHANIC: "ME"

10-15-2021, 06:12 PM	#13
1966burb Registered User Join Date: Jul 2013 Location: Maltby WA Posts: 435	Re: The 60-66 "PAYING IT FORWARD" thread! Thanks for the pics. Sent another PM. J

10-30-2021, 01:36 AM	#15
goatless Registered User Join Date: Oct 2015 Location: Mountain View Posts: 121	Re: The 60-66 "PAYING IT FORWARD" thread! Time to get rid of some items taking space. These either came of a 1964 C10, or were used on one: * Used master cylinder - Single reservoir original type * Approximately 2 year old used master cylinder - Single reservoir original type * Used OEM track bar * Used manual steering box. Worked when removed. * Highly massaged, cheap BBC hugger headers. Many, many dents. If you positively, absolutely need BBC hugger headers to tide you over until something better is off-loaded off of a container ship in SoCal, that's what these are. __________________ 1964 C10 LWB->SWB, 283->454, SM420->200-4R MECHANIC: "ME"

11-29-2021, 03:41 PM	#18
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: The 60-66 "PAYING IT FORWARD" thread! Sold! Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 12-01-2021 at 11:17 AM.

12-04-2021, 10:39 AM	#19
blacknwhitedog Registered User Join Date: Mar 2012 Location: Sonoma CA Posts: 55	Re: The 60-66 "PAYING IT FORWARD" thread! 283 block, heads, crank, rods and pistons, along with a bare th350 case. Block is standard bore and has been chemically cleaned. Used for chassis setup, no longer needed. No shipping. Come and get it. Valve covers not included. Attached Images

12-09-2021, 05:43 PM	#22
goatless Registered User Join Date: Oct 2015 Location: Mountain View Posts: 121	Re: The 60-66 "PAYING IT FORWARD" thread! * Used master cylinder - Single reservoir original type * Approximately 2 year old used master cylinder - Single reservoir original type * Used OEM track bar * Used manual steering box. Worked when removed. - Gone * Highly massaged, cheap BBC hugger headers. Many, many dents. If you positively, absolutely need BBC hugger headers to tide you over until something better is off-loaded off of a container ship in SoCal, that's what these are. * Like-new 1960 Shop truck manual - Gone Local pickups, only. “Gone” means picked-up and saved from a landfill. Attached Images __________________ 1964 C10 LWB->SWB, 283->454, SM420->200-4R MECHANIC: "ME" Last edited by goatless; 12-11-2021 at 11:46 PM.

12-09-2021, 07:27 PM	#23
60short Registered User Join Date: Aug 2017 Location: Santa Barbara, CA Posts: 206	Re: The 60-66 "PAYING IT FORWARD" thread! Id like the shop manual, and the steering box if still available. I have a job interview in Palo Alto on Friday afternoon, but would be headed down south through Mountain View if I could pick up on Saturday AM. Thanks, Keith __________________ 1960 C-10 Apache- "Rusty the Redneck Reject" 1/2 Ton short bed step side. 350 crate motor, 3 speed manual (floor shifted) MKII - Buddy Buckets and Glass Packs 20+ year long term project in process Lots of Rust, more memories... Build Thread

01-13-2022, 11:53 PM	#25
72cs20 Senior Member Join Date: Jul 2014 Location: Los Gatos, Ca. Posts: 407	Re: The 60-66 "PAYING IT FORWARD" thread! I have two good original wire harnesses that need new homes. One from a 66 K20 and one from a 62 C20. The wires and connectors are in good condition. They both have the dash and engine portions. Neither one has a complete harness to the rear. The 66 had gauges and hazard light switch. The 62 had idiot lights. Attached Images __________________ 1966 K20 flatbed build thread - http://www.67-72chevytrucks.com/vboa...d.php?t=768827 62 C20 build thread - http://67-72chevytrucks.com/vboard/s...d.php?t=703583 Last edited by 72cs20; 01-14-2022 at 06:56 PM. Reason: Clarification



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.