NM WTB OEM Radiator/Heater Hose Tower Clamps - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dirt's72 · 07-14-2020, 08:33 PM

Looking for a few original radiator and heater hose tower clamps. Thanks,
Derrick

**Ironhorse** · 07-14-2020, 09:30 PM

Quote:

Originally Posted by Dirt's72

Looking for a few original radiator and heater hose tower clamps. Thanks,
Derrick

Let me dig thru my stash of odds and ends. May have a few tower clamps, just not sure what they originally came from tho. Do you have an approximate size you need? Possibly have a pic of the type or style your looking for?

Dirt's72 · 07-14-2020, 11:17 PM

Thanks Ironhorse. I need one for the lower radiator hose on my inline 6 cylinder which is the very largest one. The upper radiator hose is smaller but I should be good there but i'd take one for it if you found one. I could use one each for the heater hoses to the water pump housing which is smaller and one larger one from the heater hose to the water pump. Thanks for checking.
Derrick

**Ironhorse** · 07-15-2020, 03:04 PM

Sorry but not finding any tower clamps after looking thru my bucket of clamps. A lot of the normal thumb screw and straight slot styled ban clamps but no tower clamps at all. Sorry could not help.

Dirt's72 · 07-18-2020, 09:36 AM

Thanks for checking Ironhorse.

**randy.powell** · 07-18-2020, 12:44 PM

carandtruckshop.com has them as well as classicindustries. com
You may regret the decision though, I ended up switching back to conventional worm clamps.
Randy

07-14-2020, 08:33 PM	#1
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,104	WTB OEM Radiator/Heater Hose Tower Clamps Looking for a few original radiator and heater hose tower clamps. Thanks, Derrick

07-14-2020, 11:17 PM	#3
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,104	Re: WTB OEM Radiator/Heater Hose Tower Clamps Thanks Ironhorse. I need one for the lower radiator hose on my inline 6 cylinder which is the very largest one. The upper radiator hose is smaller but I should be good there but i'd take one for it if you found one. I could use one each for the heater hoses to the water pump housing which is smaller and one larger one from the heater hose to the water pump. Thanks for checking. Derrick

07-15-2020, 03:04 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,063	Re: WTB OEM Radiator/Heater Hose Tower Clamps Sorry but not finding any tower clamps after looking thru my bucket of clamps. A lot of the normal thumb screw and straight slot styled ban clamps but no tower clamps at all. Sorry could not help. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

07-18-2020, 09:36 AM	#5
Dirt's72 Registered User Join Date: May 2013 Location: Albuquerque, NM Posts: 1,104	Re: WTB OEM Radiator/Heater Hose Tower Clamps Thanks for checking Ironhorse.

07-18-2020, 12:44 PM	#6
randy.powell Senior Member Join Date: Jun 2014 Location: Bushwood, MD Posts: 510	Re: WTB OEM Radiator/Heater Hose Tower Clamps carandtruckshop.com has them as well as classicindustries. com You may regret the decision though, I ended up switching back to conventional worm clamps. Randy



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.