Project "Poison Ivy" 54 GMC - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

duallyjams · 11-28-2011, 08:28 PM

Lets see hmmmmm
67 truck ( check )
64 truck ( check )
AD truck ( check )
art deco truck ( maybe next )

Root2812 · 11-28-2011, 10:23 PM

Quote:

Originally Posted by c10addict

\I know there is a company that makes an actual light... Not sure who though..

I believe that classic parts makes the actual lights that fit in the ends of the bed rails. They are kind of expencive though.

Edit... Found them http://www.classicparts.com/1941-87-...ctinfo/16-141/

solidaxel · 11-28-2011, 11:00 PM

I think I got mine from ProsPic

c10addict · 11-29-2011, 09:06 AM

Quote:

Originally Posted by duallyjams

Lets see hmmmmm
67 truck ( check )
64 truck ( check )
AD truck ( check )
art deco truck ( maybe next )

The 64 is smashing bugs in Germany... I miss the s*it outta that truck.. It was like my best friend there for a while..

My next project might not be a chevy... Ive been looking at early 60's International Harvester crew cab short beds... I have some cool ideas for one..

c10addict · 11-29-2011, 09:08 AM

Quote:

Originally Posted by Root2812

I believe that classic parts makes the actual lights that fit in the ends of the bed rails. They are kind of expencive though.

Edit... Found them http://www.classicparts.com/1941-87-...ctinfo/16-141/

Those are cool... Might look in to a set since my taillights are so close to the ground these are a great idea for safety reasons..

65Pickup · 11-29-2011, 03:26 PM

Quote:

Originally Posted by c10addict

The 64 is smashing bugs in Germany... I miss the s*it outta that truck.. It was like my best friend there for a while..

My next project might not be a chevy... Ive been looking at early 60's International Harvester crew cab short beds... I have some cool ideas for one..

A Cornbinder??? keep us in the loop on that build...you build cool stuff.

65Pickup · 11-29-2011, 03:27 PM

Quote:

Originally Posted by c10addict

Those are cool... Might look in to a set since my taillights are so close to the ground these are a great idea for safety reasons..

Any idea what your lights are from, as usual they are vintage cool.

reaper71 · 11-29-2011, 11:36 PM

That thing is cool!! awesome job
here is a quick pic of mine "orangepeel"

c10addict · 11-30-2011, 09:33 AM

Quote:

Originally Posted by reaper71

That thing is cool!! awesome job
here is a quick pic of mine "orangepeel"

Two thumbs up!!! Thats bad a$$

c10addict · 11-30-2011, 09:34 AM

Quote:

Originally Posted by 65Pickup

Any idea what your lights are from, as usual they are vintage cool.

The tail lights are 32 Ford... Thanks for the compliment!

reaper71 · 11-30-2011, 09:53 AM

Quote:

Originally Posted by c10addict

Two thumbs up!!! Thats bad a$$

A visor would totally set that thing off!!!

Mark

Daze57 · 11-30-2011, 01:58 PM

''orangepeel '' what a great looker ! great stance -like many others on this forum - yours is right up there with them !

c10addict - you said a possible ''cornbinder '' project -- v v v cool - after my 57 project i am lookin @ a 40-41 studebaker truck - may sound a bit weird but these fat boys look quite interesting ''dumped'' and widened .

c10addict · 11-30-2011, 02:43 PM

Quote:

Originally Posted by reaper71

A visor would totally set that thing off!!!

Mark

I thought about it but I am on the fence.. They are not cheap to not like! Looks good on yours!

c10addict · 12-01-2011, 09:26 AM

PICS PICS PICS!!! Front and back bumpers are on, I need to make a filler for between the rear bumper and the bed and the front bumper guards are still at the powder coat, (they are my favorite part of the front end!) exhaust is done, shocks are on the rear... Bed floor will be back in and mounted tonight.. Now on to finishing the trans tunnel, then time for the interior and audio system.. I have some great ideas for the fabrics and design.. The rear license plate location is kicking my a$$ a little but I might cut a box in to the rear bumper... Its gotta look like it belongs in my world.. Then its time to pull of some cool little detail items I have floating around in my head

...

c10addict · 12-01-2011, 09:48 AM

Quote:

Originally Posted by duallyjams

Lets see hmmmmm
67 truck ( check )
64 truck ( check )
AD truck ( check )
art deco truck ( maybe next )

Dude your dually in your avatar looks a lot like our old shop truck!!!!

hooliganshotrods · 12-01-2011, 09:58 AM

This truck is sick

Had a question for you, I'm in the process of doing the same swap, a 48 chevy on a 91 s10, I'm also bagging this truck and am using ekstensive's rear kick. I was wondering on there drawing they say to center the kick 32" from the front bed mount to the rear. This seems short when I lay it out on my frame. Was this a shortbox s10 measurement? I see you also used the ekstensive kit so thought I would ask if you can recall what the measurement was where you placed yours??

Cheers

daverod · 12-01-2011, 10:34 AM

Very cool love the truck. Can't wait to see what else you do. Have any pictures of what you did for front shock mounts. I have the stuff they sent me with the kit but no idea of how it goes.

duallyjams · 12-01-2011, 11:12 AM

That rear bumper is tucked up tight.
Hang the tag off the side of the bed like a old farm truck . just put one bolt in it so it hangs crooked

Daze57 · 12-01-2011, 02:22 PM

hang the license plate from an old thin rusted chain ... at a angle of course --
great lookin truck!

65Pickup · 12-01-2011, 02:40 PM

Quote:

Originally Posted by duallyjams

That rear bumper is tucked up tight.
Hang the tag off the side of the bed like a old farm truck . just put one bolt in it so it hangs crooked

I agree with this, like a plate on a chopper, straight up and down off the box structure. Just make it quick disconnect for shows, the truck looks great.

c10addict · 12-01-2011, 03:54 PM

Quote:

Originally Posted by hooliganshotrods

This truck is sick

Had a question for you, I'm in the process of doing the same swap, a 48 chevy on a 91 s10, I'm also bagging this truck and am using ekstensive's rear kick. I was wondering on there drawing they say to center the kick 32" from the front bed mount to the rear. This seems short when I lay it out on my frame. Was this a shortbox s10 measurement? I see you also used the ekstensive kit so thought I would ask if you can recall what the measurement was where you placed yours??

Cheers

The kit I used the two link kit that bolted right to the front leaf spring hanger... Then I placed the notch where I wanted it and welded it in.. There were no measurements needed... Not sure what set up you have.. Can you post a picture?

c10addict · 12-01-2011, 03:56 PM

Quote:

Originally Posted by daverod

Very cool love the truck. Can't wait to see what else you do. Have any pictures of what you did for front shock mounts. I have the stuff they sent me with the kit but no idea of how it goes.

My front shock mounts are still laying on shelf... I have not tackled them yet... The right side looked easy... the drivers side not so much.. I might make my own... I will keep you "posted"

duallyjams · 12-01-2011, 05:10 PM

Quote:

Originally Posted by c10addict

Dude your dually in your avatar looks a lot like our old shop truck!!!!

ordered Dec2001-delivered April 2002-bagged May 2002

Name: IMG_0339.jpg
Views: 1707
Size: 87.1 KB

daverod · 12-01-2011, 05:31 PM

Quote:

Originally Posted by c10addict

My front shock mounts are still laying on shelf... I have not tackled them yet... The right side looked easy... the drivers side not so much.. I might make my own... I will keep you "posted"

I'll be waiting. I was going to phone them to see if they could explain it but I do better with pictures,

c10addict · 12-07-2011, 10:02 AM

Bed floor is in, Wheel tubs are in, made a sheet metal piece for around the fuel filler neck and made a gas cap out of the original horn button... Worked on the trans tunnel too, it will be completed tonight and the floors will be ready for Dynamat.. Couple of pics for you all with "Ivy" hanging out with some friends in the shop..

11-28-2011, 08:28 PM	#151
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Project "Poison Ivy" 54 GMC Lets see hmmmmm 67 truck ( check ) 64 truck ( check ) AD truck ( check ) art deco truck ( maybe next ) __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

11-28-2011, 11:00 PM	#153
solidaxel Registered User Join Date: Dec 2002 Location: Cactus Patch So. Az Posts: 4,749	Re: Project "Poison Ivy" 54 GMC I think I got mine from ProsPic __________________ 53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42

11-29-2011, 11:36 PM	#158
reaper71 Registered User Join Date: Nov 2011 Location: West Plains Missouri Posts: 2,088	Re: Project "Poison Ivy" 54 GMC That thing is cool!! awesome job here is a quick pic of mine "orangepeel" Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=645774 Project Orangepeel 52 A.D. http://67-72chevytrucks.com/vboard/s...d.php?t=653337 John's LS 49 dodge http://67-72chevytrucks.com/vboard/s...d.php?t=655780 Blake's 67 GMC LS stepside http://67-72chevytrucks.com/vboard/s...d.php?t=690527 Reed 78 FJ40 Rebuild http://67-72chevytrucks.com/vboard/s...d.php?t=733259 Barger's 78 FJ40

11-30-2011, 01:58 PM	#162
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: Project "Poison Ivy" 54 GMC ''orangepeel '' what a great looker ! great stance -like many others on this forum - yours is right up there with them ! c10addict - you said a possible ''cornbinder '' project -- v v v cool - after my 57 project i am lookin @ a 40-41 studebaker truck - may sound a bit weird but these fat boys look quite interesting ''dumped'' and widened .

12-01-2011, 09:26 AM	#164
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Project "Poison Ivy" 54 GMC PICS PICS PICS!!! Front and back bumpers are on, I need to make a filler for between the rear bumper and the bed and the front bumper guards are still at the powder coat, (they are my favorite part of the front end!) exhaust is done, shocks are on the rear... Bed floor will be back in and mounted tonight.. Now on to finishing the trans tunnel, then time for the interior and audio system.. I have some great ideas for the fabrics and design.. The rear license plate location is kicking my a$$ a little but I might cut a box in to the rear bumper... Its gotta look like it belongs in my world.. Then its time to pull of some cool little detail items I have floating around in my head ... __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile Last edited by c10addict; 12-01-2011 at 09:38 AM.

12-01-2011, 09:58 AM	#166
hooliganshotrods Registered User Join Date: Nov 2011 Location: Calgary, AB Canada Posts: 34	Re: Project "Poison Ivy" 54 GMC This truck is sick Had a question for you, I'm in the process of doing the same swap, a 48 chevy on a 91 s10, I'm also bagging this truck and am using ekstensive's rear kick. I was wondering on there drawing they say to center the kick 32" from the front bed mount to the rear. This seems short when I lay it out on my frame. Was this a shortbox s10 measurement? I see you also used the ekstensive kit so thought I would ask if you can recall what the measurement was where you placed yours?? Cheers

12-01-2011, 10:34 AM	#167
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Project "Poison Ivy" 54 GMC Very cool love the truck. Can't wait to see what else you do. Have any pictures of what you did for front shock mounts. I have the stuff they sent me with the kit but no idea of how it goes. __________________ Daverods 64 C10 Daily driver 292 3 speed "Driver" Daverods 66 Build C10 Bags 350/350(On Hold) Daverods 52 Build 3100 S10 chassis,Bags, 350/700r4 "Click it"

12-01-2011, 11:12 AM	#168
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Project "Poison Ivy" 54 GMC That rear bumper is tucked up tight. Hang the tag off the side of the bed like a old farm truck . just put one bolt in it so it hangs crooked __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

12-01-2011, 02:22 PM	#169
Daze57 Registered User Join Date: Jul 2011 Location: Las Vegas - Nev. aka Sin City Posts: 1,835	Re: Project "Poison Ivy" 54 GMC hang the license plate from an old thin rusted chain ... at a angle of course -- great lookin truck!

12-07-2011, 10:02 AM	#175
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Project "Poison Ivy" 54 GMC Bed floor is in, Wheel tubs are in, made a sheet metal piece for around the fuel filler neck and made a gas cap out of the original horn button... Worked on the trans tunnel too, it will be completed tonight and the floors will be ready for Dynamat.. Couple of pics for you all with "Ivy" hanging out with some friends in the shop.. __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.