Bracket identification... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

EARNHARDT#3 · 03-28-2015, 09:41 PM

Can anyone identify any of these brackets?

EARNHARDT#3 · 03-29-2015, 02:14 PM

Anyone?

teeitup · 03-29-2015, 05:16 PM

the one in middle top row looks like a 6 cyl alt bracket

Wizo · 03-29-2015, 07:32 PM

I believe The bottom left one is Mounted to the back of the engine And is meant to be used for taking the engine out of the vehicle.

EARNHARDT#3 · 03-30-2015, 10:27 AM

Thanks guys! If anyone knows what the others are I'd appreciate the info.

**michael bustamante** · 03-30-2015, 10:34 AM

could that first one on the top row be the cradle for the p steer pump on a 250?

cigar- · 03-30-2015, 03:45 PM

The bottom one I have seen a number of times. It's always bolted on to a V8 motor that comes from GM. The factory uses them for lifting purposes.

Go to any GM dealer that sells crate motors. There will be one (or two) bolted on the upper side of the motor (even on motors that are crated....not just skidded).

EARNHARDT#3 · 04-01-2015, 02:31 PM

Thanks guys....

03-28-2015, 09:41 PM	#1
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Bracket identification... Can anyone identify any of these brackets? Attached Images __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

03-29-2015, 02:14 PM	#2
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: Bracket identification... Anyone? __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

03-29-2015, 07:32 PM	#4
Wizo Registered User Join Date: Dec 2012 Location: Tacoma WA Posts: 274	Re: Bracket identification... I believe The bottom left one is Mounted to the back of the engine And is meant to be used for taking the engine out of the vehicle. __________________ 1970 3/4 ton long box GMC !968 C10 short stepside (Papa's Old Lorry) 2006 2500 HD Silverado Duramax/Alison

03-30-2015, 10:27 AM	#5
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: Bracket identification... Thanks guys! If anyone knows what the others are I'd appreciate the info. __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP

03-30-2015, 10:34 AM	#6
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: Bracket identification... could that first one on the top row be the cradle for the p steer pump on a 250? __________________ 1967custom

03-29-2015, 05:16 PM	#3
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Bracket identification... the one in middle top row looks like a 6 cyl alt bracket __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-30-2015, 03:45 PM	#7
cigar- Registered User Join Date: Aug 2013 Location: simi valley, ca Posts: 106	Re: Bracket identification... The bottom one I have seen a number of times. It's always bolted on to a V8 motor that comes from GM. The factory uses them for lifting purposes. Go to any GM dealer that sells crate motors. There will be one (or two) bolted on the upper side of the motor (even on motors that are crated....not just skidded).

04-01-2015, 02:31 PM	#8
EARNHARDT#3 Registered User Join Date: May 2014 Location: PA Posts: 1,417	Re: Bracket identification... Thanks guys.... __________________ 1967 C10, LWB, 250, Powerglide, PS, PB, 3/4 STATIC DROP



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.