Billet Specialties true trac , with supercharger? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Painter D · 07-29-2009, 10:14 PM

Just doin a little research.

Does anybody know if the true trac serpentine setup for a small block Chevy will work with a Weiand 142 supercharger. Or if one of the March setups will work? I'm sure that a GM performance parts serpentine setup would work with a blower ,but I was just curious if any other setups would.

Anybody got any pics?

mclairmo · 07-30-2009, 12:19 AM

I would think that Weiand, March or Tru Trac would know.

**SactoJim** · 07-30-2009, 01:06 PM

I used Concept One with a "long water pump" blower. the hitch you may run into (I did) was fitting the lower blower pulley into the serp pulley. They (Concept) machined a lower blower pulley for a very reasonable cost. If I remember correctly, I have a little more than a grand in my pulley setup (came with water pump, 100A alt, and compressor)

That said, I sure to like the others (like Billet Sp & Vintage) that are more compact and only use one belt......they are alot more coin though.

Painter D · 07-30-2009, 10:58 PM

Only a grand! I figured you spent alot more than that on your setup. I may look into Concept one ,for that price. Thanks for the info.

Anybody else?

noskiki6 · 01-25-2017, 02:44 AM

I Have a couple questions. I have a nova with a 383 and on top a weiand 142 but I have trouble with temperature. I Can't drive it for more then 10 minutes without getting the temperature to 200. I Have a aluminum radiator my distributor doesn't have advance no msd retardant It has a msd6al. It has a 350 trans and a 4.11 rear diff and a regular stall I have used electrical fan and a regular also what do you guy think? Any help is welcome. Thanks.

Quote:

Originally Posted by SactoJim

I used Concept One with a "long water pump" blower. the hitch you may run into (I did) was fitting the lower blower pulley into the serp pulley. They (Concept) machined a lower blower pulley for a very reasonable cost. If I remember correctly, I have a little more than a grand in my pulley setup (came with water pump, 100A alt, and compressor)

That said, I sure to like the others (like Billet Sp & Vintage) that are more compact and only use one belt......they are alot more coin though.

07-29-2009, 10:14 PM	#1
Painter D Registered User Join Date: Jun 2007 Location: DFW (Forney) Posts: 1,529	Billet Specialties true trac , with supercharger? Just doin a little research. Does anybody know if the true trac serpentine setup for a small block Chevy will work with a Weiand 142 supercharger. Or if one of the March setups will work? I'm sure that a GM performance parts serpentine setup would work with a blower ,but I was just curious if any other setups would. Anybody got any pics? __________________ '58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5

07-30-2009, 12:19 AM	#2
mclairmo Registered User Join Date: Jan 2006 Location: Take Off Posts: 1,908	Re: Billet Specialties true trac , with supercharger? I would think that Weiand, March or Tru Trac would know.

07-30-2009, 01:06 PM	#3
SactoJim Registered User Join Date: Oct 2005 Location: Sacramento, CA Posts: 1,970	Re: Billet Specialties true trac , with supercharger? I used Concept One with a "long water pump" blower. the hitch you may run into (I did) was fitting the lower blower pulley into the serp pulley. They (Concept) machined a lower blower pulley for a very reasonable cost. If I remember correctly, I have a little more than a grand in my pulley setup (came with water pump, 100A alt, and compressor) That said, I sure to like the others (like Billet Sp & Vintage) that are more compact and only use one belt......they are alot more coin though. Attached Images __________________ 72 Cheyenne SWB Fleet Nut & bolt frame off in progress...99.9999% - supercharged 383 - 4 wheel discs - relocated fuel tank - My Build Thread

07-30-2009, 10:58 PM	#4
Painter D Registered User Join Date: Jun 2007 Location: DFW (Forney) Posts: 1,529	Re: Billet Specialties true trac , with supercharger? Only a grand! I figured you spent alot more than that on your setup. I may look into Concept one ,for that price. Thanks for the info. Anybody else? __________________ '58 SWB Fleetside...Front & Rear Porterbuilt Dropmember, 6.0 LS /4L60E. Accuair E-level, 20 Billet Specialties (Vintecs) '63 Buick Riviera ... AccuAir E-level, 20" Billet Specialties (Vintecs) http://67-72chevytrucks.com/vboard/s...=528853&page=5



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.