where can i get a rear disk kit for a 72 1/2ton - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ucmydust68 · 08-06-2003, 10:10 AM

?????

rin68 · 08-06-2003, 10:27 AM

i'll post some pics of the setup i'm using....it uses camaro front caliper--don't need a parking brake, caddy rotors, and a bracket i picked up on ebay. if you want/need an e-brake, rear calipers from a camaro or a caddy can be used. i'll get some pics tonight after work

ucmydust68 · 08-06-2003, 12:10 PM

sweet thanks, i would need a parking break im running a six speed so i need that to stay still

slam33 · 08-06-2003, 10:01 PM

rin68 I would like to see that too. I have the 77 Caddy Seville rear set up but the hats will not fit the axles unless I turn the hub down.

rin68 · 08-08-2003, 04:01 PM

slam--I had to turn my axles to get the Caddy rotors to fit, the setup goes together well. hopefully performs well too. here are the pics.

chiphayes · 08-08-2003, 11:56 PM

keep us posted,im curious to see if you have to changfe the proportioning valve,i want to do the same thing

**GMCPaul** · 08-09-2003, 02:35 AM

We carry the rear disc kits, you'll find them here
http://www.gmcpauls.com/Brakes&Steering.htm
GMCPaul

chiphayes · 08-09-2003, 07:00 AM

paul i your the man, and the price looks good,i have power brakes,but will i need to change prop valve?and do you keep the disc kits in stock? if so i will come down and check them out

slam33 · 08-09-2003, 09:18 AM

Are those the 10" or 12" disks and what disc application are you using ?

rin68 · 08-10-2003, 12:12 PM

They're 12" discs, from a 77 Cadillac Sedan deVille. I'm using Classic Performance Products master cylinder/booster/prop valve setup, it's supposedly set up for 4whl discs already but i might have to add an adjustable valve. hopefully in the next 3 wks i'll be able to get all the parts on the truck i'll post results/performance when its up and running

slam33 · 08-12-2003, 10:44 AM

Try the car and truck shop, they have a 4whl disc prop valve

**GMCPaul** · 08-15-2003, 08:18 AM

Our rear disc kit comes with the 12" rotors in either 5bolt on 5" pattern or 6bolt on 5 1/2" pattern, and they use the Cadillac style calipers so you can connect the emergency brake and keep it functional, they also include all mounting brackets, hardware & hoses. Chip we try to always keep everything in stock, but it always pays to call in advance as our inventory is always going in and out the door. The prop valve should be changed to a disc/disc valve or a adju7stable prop valve should be added inline to adjust braking bias.
GMCPaul

slam33 · 08-15-2003, 11:22 PM

The trick is to find the mounts by them selfs. the backing plates I have need to be redrilled to fit my axle housings.
GMC Paul, do your hats fit a standard hub or do I need to turn down the hub ?

rin68 · 08-18-2003, 03:36 PM

the backing plates/brackets i used came from Steeltech Solutions in Marion, IL; i don't remeber the phone number but could probably dig it out if anyone is interested

slam33 · 08-19-2003, 10:00 AM

Found this page on steel tech
http://www.oldcarguy.com/new_page_76.htm

08-06-2003, 10:10 AM	#1
ucmydust68 fuel Join Date: Jul 2003 Location: belton mo Posts: 371	where can i get a rear disk kit for a 72 1/2ton ?????

08-06-2003, 10:27 AM	#2
rin68 Senior Member Join Date: Mar 2000 Location: East Peoria, IL Posts: 600	i'll post some pics of the setup i'm using....it uses camaro front caliper--don't need a parking brake, caddy rotors, and a bracket i picked up on ebay. if you want/need an e-brake, rear calipers from a camaro or a caddy can be used. i'll get some pics tonight after work __________________ 1968 C10 - 383, non-stop project 1969 Camaro - 327, bone stock family heirloom...soon to be LS/T56, Ridetech, all the goodies

08-06-2003, 10:01 PM	#4
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	rin68 I would like to see that too. I have the 77 Caddy Seville rear set up but the hats will not fit the axles unless I turn the hub down. __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

08-08-2003, 04:01 PM	#5
rin68 Senior Member Join Date: Mar 2000 Location: East Peoria, IL Posts: 600	slam--I had to turn my axles to get the Caddy rotors to fit, the setup goes together well. hopefully performs well too. here are the pics. __________________ 1968 C10 - 383, non-stop project 1969 Camaro - 327, bone stock family heirloom...soon to be LS/T56, Ridetech, all the goodies

08-09-2003, 02:35 AM	#7
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,718	We carry the rear disc kits, you'll find them here http://www.gmcpauls.com/Brakes&Steering.htm GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

08-06-2003, 12:10 PM	#3
ucmydust68 fuel Join Date: Jul 2003 Location: belton mo Posts: 371	sweet thanks, i would need a parking break im running a six speed so i need that to stay still

08-08-2003, 11:56 PM	#6
chiphayes Registered User Join Date: Jan 2003 Location: indiana Posts: 186	keep us posted,im curious to see if you have to changfe the proportioning valve,i want to do the same thing

08-09-2003, 07:00 AM	#8
chiphayes Registered User Join Date: Jan 2003 Location: indiana Posts: 186	paul i your the man, and the price looks good,i have power brakes,but will i need to change prop valve?and do you keep the disc kits in stock? if so i will come down and check them out

08-09-2003, 09:18 AM	#9
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Are those the 10" or 12" disks and what disc application are you using ? __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

08-10-2003, 12:12 PM	#10
rin68 Senior Member Join Date: Mar 2000 Location: East Peoria, IL Posts: 600	They're 12" discs, from a 77 Cadillac Sedan deVille. I'm using Classic Performance Products master cylinder/booster/prop valve setup, it's supposedly set up for 4whl discs already but i might have to add an adjustable valve. hopefully in the next 3 wks i'll be able to get all the parts on the truck i'll post results/performance when its up and running

08-12-2003, 10:44 AM	#11
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Try the car and truck shop, they have a 4whl disc prop valve __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

08-15-2003, 08:18 AM	#12
GMCPaul Senior Member Join Date: Mar 2000 Location: Rockville,In. USA Posts: 3,718	Our rear disc kit comes with the 12" rotors in either 5bolt on 5" pattern or 6bolt on 5 1/2" pattern, and they use the Cadillac style calipers so you can connect the emergency brake and keep it functional, they also include all mounting brackets, hardware & hoses. Chip we try to always keep everything in stock, but it always pays to call in advance as our inventory is always going in and out the door. The prop valve should be changed to a disc/disc valve or a adju7stable prop valve should be added inline to adjust braking bias. GMCPaul __________________ Secure Online Catalog for-GMCPauls Truck Parts Email- GMCPAULS@GMAIL.COM

08-15-2003, 11:22 PM	#13
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	The trick is to find the mounts by them selfs. the backing plates I have need to be redrilled to fit my axle housings. GMC Paul, do your hats fit a standard hub or do I need to turn down the hub ? __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>

08-18-2003, 03:36 PM	#14
rin68 Senior Member Join Date: Mar 2000 Location: East Peoria, IL Posts: 600	the backing plates/brackets i used came from Steeltech Solutions in Marion, IL; i don't remeber the phone number but could probably dig it out if anyone is interested

08-19-2003, 10:00 AM	#15
slam33 Registered User Join Date: Aug 2001 Location: Long Beach, Ca Posts: 1,432	Found this page on steel tech http://www.oldcarguy.com/new_page_76.htm __________________ 71 LWB 350/350still working on it but it's going tp be sweet. www.geocities.com/stevemau/slam33page.html " TARGET=_blank>http://www.geocities.com/stevemau/slam33page.html?1004806705410 </A>



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.