window glass - The 1947 - Present Chevrolet & GMC Truck Message Board Network

loblazer · 03-02-2004, 02:43 PM

Hi gang, I am a new member. Live just outside Toronto, Ontario. Have been reading this a lot and got a lot of good ideas and info so thought I better join. Maybe I too can help someone in the future.

I am building a 1980 2wd blazer with 1984 clip. Dopped 5" front and back with DJM coils, spindles flip kit and c-notch by me. Belltech drop shocks all around.

350/350/308 with 700r4 in the garage waiting to go in. Currently at my buddy's shop getting floor, new side panels and complete paint.

When my son shows me how to do it, I will put up pics of WIP and finished.

I was wondering, can anyone give me tips on how to safely change out the windshield and side glass? I have the glass and don't want to break it going in. Not worried about the old stuff coming out.

Thanks, Doug

03-02-2004, 02:43 PM	#1
loblazer Senior Member Join Date: Mar 2004 Location: Fergus, Ontario Posts: 481	window glass help needed Hi gang, I am a new member. Live just outside Toronto, Ontario. Have been reading this a lot and got a lot of good ideas and info so thought I better join. Maybe I too can help someone in the future. I am building a 1980 2wd blazer with 1984 clip. Dopped 5" front and back with DJM coils, spindles flip kit and c-notch by me. Belltech drop shocks all around. 350/350/308 with 700r4 in the garage waiting to go in. Currently at my buddy's shop getting floor, new side panels and complete paint. When my son shows me how to do it, I will put up pics of WIP and finished. I was wondering, can anyone give me tips on how to safely change out the windshield and side glass? I have the glass and don't want to break it going in. Not worried about the old stuff coming out. Thanks, Doug Last edited by loblazer; 03-02-2004 at 09:14 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.