How Do You Guys Do It? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**'70_402** · 01-03-2005, 03:36 PM

How do you guys get a 12 volt source? do you put a blade type connector on the wire and push it inbetween the fuse and the holder? (i know it is kindof rigged up) basically what i am asking is, what is your method??

**CPNE** · 01-03-2005, 03:37 PM

If I understand the question, I use cig or ignition unfused spades on the fuseblock, depending upon the application.

Longhorn Man · 01-03-2005, 08:56 PM

I just finished wiring up a relay that is turned on my the IGNITION UNFUSED terminal. This way I can run noumerouse things off this one terminal yet not over work the original harness.

incoma · 01-04-2005, 12:42 AM

I think this is a good question. What if you want to hook up the lighter light or glove box light, and want it to come on with the rest of your interior lights? Then you'd have to connect this to the "pnl lts" fuse, but what's the best way to do this?

I've seen special curved connectors that you can just slide inbetween the fuse and holder, but this doesn't look that clean to me. Any other preferred manner of doing this?

Longhorn Man · 01-04-2005, 06:04 AM

incoma, look on the pic above, under the CL of the word cluster feed.... that terminal is hooked to the dash lights. What ever you plug in there will dim or brightern with the rheostat with the dash lights.

incoma · 01-04-2005, 09:37 AM

Great. Thanks for pointing that out. I've looked at my fusebox and this picture several times and glossed over that little detail each time.

**Zonaman** · 01-04-2005, 12:06 PM

Quote:

Originally Posted by CPNE

If I understand the question, I use cig or ignition unfused spades on the fuseblock, depending upon the application.

OK, but what'da do if all these are taken up?

**CPNE** · 01-04-2005, 12:13 PM

Quote:

Originally Posted by Zonaman

OK, but what'da do if all these are taken up?

Absolutely no clue. My trucks are all stock with no added frills (or any frills for that matter). I subscribe to the KISS principal. I never have a question that isn't addressed by the factory GM manuals

I'm sure someone else can help ya though

01-03-2005, 03:36 PM	#1
'70_402 Senior Member Join Date: Dec 2003 Location: Pampa, Texas Posts: 1,554	How Do You Guys Do It? How do you guys get a 12 volt source? do you put a blade type connector on the wire and push it inbetween the fuse and the holder? (i know it is kindof rigged up) basically what i am asking is, what is your method?? __________________ https://www.ebay.com/itm/295742064443

01-03-2005, 03:37 PM	#2
CPNE Resident Curmudgeon Join Date: Dec 1999 Location: NH Posts: 6,664	If I understand the question, I use cig or ignition unfused spades on the fuseblock, depending upon the application. Attached Images __________________ Currently on or near the homestead: 67 Chevy SWB 2WD stepside 350/3 on tree (Pat's) 67 GMC SWB 2WD Fleet 402/auto (Brian's under construction) 67 Chevy 3/4 ton 2WD 402/auto (Business Hauler) 67 Chevy 1 ton dually 2WD 396/4 speed (Former business hauler, Needs TLC) 68 Chevy 1/2 ton Suburban 2WD 250 six/3 on tree (Brian's Needs TLC) 70 Chevy 3/4 ton 4WD 350/4 speed (Pat's - Disguised as a 68 GMC) 71 Chevy SWB stepside (Crushed by tree - parts donor) 72 Chevy 3/4 ton 4WD (Parts donor) 72 Chevy 3/4 ton 4WD Suburban (Parts Donor) 72 GMC 3/4 ton 4WD 292 six/4 speed (Mine - Disguised as a 67 GMC) 81 GMC 4WD Dually Dump Body 350/4 speed (Business Hauler) 82 Camaro Z/28 355/Super T-10 (Pat's toy) 93 Caprice 9C1 (Brian's Cop Car) 02 Toyota Camry (Reliable but a souless steel and plastic hulk) 2011 2SS RS Camaro M6 Factory Hurst Shifter Maybe I need to sell some of this crap Yet another Bozo with a sawz-all Last edited by CPNE; 01-03-2005 at 03:41 PM.

01-03-2005, 08:56 PM	#3
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	I just finished wiring up a relay that is turned on my the IGNITION UNFUSED terminal. This way I can run noumerouse things off this one terminal yet not over work the original harness.

01-04-2005, 12:42 AM	#4
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	I think this is a good question. What if you want to hook up the lighter light or glove box light, and want it to come on with the rest of your interior lights? Then you'd have to connect this to the "pnl lts" fuse, but what's the best way to do this? I've seen special curved connectors that you can just slide inbetween the fuse and holder, but this doesn't look that clean to me. Any other preferred manner of doing this?

01-04-2005, 06:04 AM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	incoma, look on the pic above, under the CL of the word cluster feed.... that terminal is hooked to the dash lights. What ever you plug in there will dim or brightern with the rheostat with the dash lights.

01-04-2005, 09:37 AM	#6
incoma Registered User Join Date: Mar 2004 Location: Lexington, KY Posts: 865	Great. Thanks for pointing that out. I've looked at my fusebox and this picture several times and glossed over that little detail each time.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.