fbody fuel pump and tank gauge question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1970 C10 MJW · 02-06-2013, 02:43 PM

I am working on putting my fbody fuel pump in my truck, and i would like to figure out a way to hook up my fuel gauge, I would really like to keep the factory gauge.. but if i have to i suppose i could get a new one.... anyways any suggestions guys?

ls1nova71 · 02-06-2013, 11:16 PM

What year of f body? The newer ones use a completely different ohm range, like 33 to 230 or something like that, where as the truck uses a . To 90 ohm sender. I don't think it will work.
Posted via Mobile Device

1970 C10 MJW · 02-07-2013, 09:16 AM

i think its a 99 or 00.. but not %100 i bought it on ebay.. I may just have to be careful... lol!!!

whitels1 · 02-07-2013, 09:39 AM

I installed a newer style pump in my K5, if I had to do it over I would have kept the old sender and then mounted my assy in another location on the tank. My new pump assy is for an 03 Silverado, it is ohms 240 full 33 empty but once keyed up or running its voltage 257 full 57 empty.

1970 C10 MJW · 02-08-2013, 02:15 PM

i wish i could, but i have the factory tank inside the 0cab and there is no way i could keep the sender if I go to a under bed tank

02-06-2013, 02:43 PM	#1
1970 C10 MJW Registered User Join Date: Aug 2012 Location: Indiana Posts: 470	fbody fuel pump and tank gauge question I am working on putting my fbody fuel pump in my truck, and i would like to figure out a way to hook up my fuel gauge, I would really like to keep the factory gauge.. but if i have to i suppose i could get a new one.... anyways any suggestions guys? __________________ 70 C10 working on a LSx swap 4.8L MS3 edelbrock pro flo intake, pacesetter long tubes, 4l60e 2500 stall hoping the tranny holds up lol

02-06-2013, 11:16 PM	#2
ls1nova71 Registered User Join Date: Dec 2009 Location: Independence Mo Posts: 4,118	Re: fbody fuel pump and tank gauge question What year of f body? The newer ones use a completely different ohm range, like 33 to 230 or something like that, where as the truck uses a . To 90 ohm sender. I don't think it will work. Posted via Mobile Device __________________ My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html

02-07-2013, 09:16 AM	#3
1970 C10 MJW Registered User Join Date: Aug 2012 Location: Indiana Posts: 470	Re: fbody fuel pump and tank gauge question i think its a 99 or 00.. but not %100 i bought it on ebay.. I may just have to be careful... lol!!! __________________ 70 C10 working on a LSx swap 4.8L MS3 edelbrock pro flo intake, pacesetter long tubes, 4l60e 2500 stall hoping the tranny holds up lol

02-07-2013, 09:39 AM	#4
whitels1 Registered User Join Date: Apr 2012 Location: Vegas Posts: 617	Re: fbody fuel pump and tank gauge question I installed a newer style pump in my K5, if I had to do it over I would have kept the old sender and then mounted my assy in another location on the tank. My new pump assy is for an 03 Silverado, it is ohms 240 full 33 empty but once keyed up or running its voltage 257 full 57 empty. __________________ GoldyLS1 K20 Build My K10 Rock Crawler -Dave

02-08-2013, 02:15 PM	#5
1970 C10 MJW Registered User Join Date: Aug 2012 Location: Indiana Posts: 470	Re: fbody fuel pump and tank gauge question i wish i could, but i have the factory tank inside the 0cab and there is no way i could keep the sender if I go to a under bed tank __________________ 70 C10 working on a LSx swap 4.8L MS3 edelbrock pro flo intake, pacesetter long tubes, 4l60e 2500 stall hoping the tranny holds up lol



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.