And so it begins................ - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMC406 · 05-25-2009, 06:03 PM

Where did you get the carpet you put in? If you mentioned I didnt see, was gonna order mine from LMC, it will be awile. Just want to see if LMC's carpet is any good. Have used them for plenty before so I have no reason to dout them. When your trottle sticks, do you still have pedal or is the pedal bottomed out?

*TheSebring* · 05-25-2009, 08:12 PM

The pedal bottoms out I believe... And high, I think about it now and see what you mean. I didn't realize until now that it didn't cut out at the higher rpms. Might be getting lucky.

*highperf4x4* · 05-25-2009, 08:36 PM

Quote:

Originally Posted by GMC406

Where did you get the carpet you put in? If you mentioned I didnt see, was gonna order mine from LMC, it will be awile. Just want to see if LMC's carpet is any good. Have used them for plenty before so I have no reason to dout them. When your trottle sticks, do you still have pedal or is the pedal bottomed out?

I ordered the carpet from www.classicparts.com and it came with the jute backing and fit pretty good without having to lay it in the sun.

No, the throttle doesn't have to bottom out when it hangs. It will do it sometimes at 3/4.

*highperf4x4* · 05-25-2009, 08:40 PM

Quote:

Originally Posted by TheSebring

I won't knock the chances. I washed my car and the carburetor quit working

.

Yeah and that was a gas cap situation, go figure.............

JohnC · 05-26-2009, 09:34 AM

Hell and I thought I was the only one that had that kind of luck!

*highperf4x4* · 05-26-2009, 10:33 AM

Quote:

Originally Posted by JohnC

Hell and I thought I was the only one that had that kind of luck!

Nope, it happens to the best of us too!

joe231 · 05-26-2009, 10:46 AM

and the worst of us

JohnC · 05-26-2009, 12:31 PM

*TheSebring* · 05-26-2009, 08:21 PM

Especially the worst of us... Try to take out the fuel vent cannister to check if it's working properly and break the condenser. I looked like the hulk after that piece broke off. P*ssed, tearing my shirt off, and solid green

.

*highperf4x4* · 05-26-2009, 10:18 PM

Quote:

Originally Posted by TheSebring

Especially the worst of us... Try to take out the fuel vent cannister to check if it's working properly and break the condenser. I looked like the hulk after that piece broke off. P*ssed, tearing my shirt off, and solid green

.

Did that charcoal inside the canister look good because it cost you about 300.00 to look at it?

scotts62 · 05-26-2009, 10:49 PM

Any updates?? where are the new pics

JohnC · 05-27-2009, 08:45 AM

Quote:

Originally Posted by highperf4x4

Did that charcoal inside the canister look good because it cost you about 300.00 to look at it?

Oh man that was just wrong. Kicking a guy while he's down! Funny, but wrong!

Hell I'm just yanking my canister out, and not worrying about it!

*highperf4x4* · 05-27-2009, 09:14 AM

Yeah they are pretty much worthless unless you're an enviromental advocate.

However, everything under the hood of that car was still factory until I gave it to jr. Now he is going to change it all!

*highperf4x4* · 05-27-2009, 09:16 AM

My fuel pump is trying to kick the bucket now. It's shooting gas all over the engine mount. It's making the gas fumes inside the cab alot worse!

JohnC · 05-27-2009, 09:27 AM

That's the important part to fix is the fumes inside the cab!

Don't wanna have to smell that going down the road.

'72customdeluxe · 05-27-2009, 04:41 PM

Quote:

Originally Posted by highperf4x4

Yeah they are pretty much worthless unless you're an enviromental advocate.

However, everything under the hood of that car was still factory until I gave it to jr. Now he is going to change it all!

Mine was factory when I got it but the air pump sounded like a spun bearing/rod knock all of a sudden and had me scared chiteless for the life of the motor. Took it off and everything's peachy. Then the egr became a vacuum leak a few days after I disconnected it. So I just as well finish it off with the charcoal canister. Plus the flap in the snorkel of the air cleaner froze shut, so basically it all sucks

*highperf4x4* · 05-27-2009, 11:14 PM

Quote:

Originally Posted by '72customdeluxe

Mine was factory when I got it but the air pump sounded like a spun bearing/rod knock all of a sudden and had me scared chiteless for the life of the motor. Took it off and everything's peachy. Then the egr became a vacuum leak a few days after I disconnected it. So I just as well finish it off with the charcoal canister. Plus the flap in the snorkel of the air cleaner froze shut, so basically it all sucks

man that sounds all too familiar! Everything always worked so flippin good on that Satellite though that I hated to touch any of it. However, it's time to jerk it out now. A cool can would work great in the place of that charcoal canister.

joe231 · 05-27-2009, 11:18 PM

Mmmm, smores
Sooo good....

New fuel pump tonight???

*highperf4x4* · 05-27-2009, 11:23 PM

yup, just a sec and I'll toss ya a pic!

*highperf4x4* · 05-27-2009, 11:37 PM

It took a couple hours and a couple flashlights but I finally got it. The big blocks don't leave much room to navigate!

*highperf4x4* · 05-27-2009, 11:48 PM

And John, I put those rallys you sold me on the old mans truck today. They look alot "beefier" than the factory rallys. This first pic is his old wheels.

*TheSebring* · 05-28-2009, 12:25 AM

Did that lug wrench out of the Satellite do the trick for the spare key? I figured it would work, but did you find his old one? And yeah it does look a lot beefier. I need that same size in Mickey Thompson Bajas on my truck

.

*highperf4x4* · 05-28-2009, 01:29 AM

He decided not to pull the spare yet. He can mount the 5th rim later.

scotts62 · 05-28-2009, 07:45 AM

Cool!

JohnC · 05-28-2009, 07:56 AM

They look sweet man! That custom paint job on those wheels really go well with the truck!

Now I need to paint the ones that are on my truck now the way I did those.

05-25-2009, 06:03 PM	#176
GMC406 Professional Grade Join Date: May 2009 Location: Hill City KS Posts: 366	Re: And so it begins................ Where did you get the carpet you put in? If you mentioned I didnt see, was gonna order mine from LMC, it will be awile. Just want to see if LMC's carpet is any good. Have used them for plenty before so I have no reason to dout them. When your trottle sticks, do you still have pedal or is the pedal bottomed out? __________________ 61 GMC 9' Step Someday it will be a build http://67-72chevytrucks.com/vboard/s...=1#post3356828 67 C-30 Red Dale motorhome http://67-72chevytrucks.com/vboard/s...31#post3845531 71 GMC Street performer in the works Waiting for warm weather http://67-72chevytrucks.com/vboard/s...d.php?t=341946 1990 GMC Sierra GT-sold 1983 chevy 4x4-project on hold maybe sell 1969 Triuph GT 6- sold 1996 Ford I-6 5 Speed 4x4 2004 Dodge Intrepid- milage maker 1959 Ford Fairlaine, factory a/c 292Yblock- sold 1982 Honda XL500R Always lookin for other old trucks!

05-25-2009, 08:12 PM	#177
TheSebring Account Suspended Join Date: May 2009 Location: Noble,Ok Posts: 576	Re: And so it begins................ The pedal bottoms out I believe... And high, I think about it now and see what you mean. I didn't realize until now that it didn't cut out at the higher rpms. Might be getting lucky.

05-26-2009, 09:34 AM	#180
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: And so it begins................ Hell and I thought I was the only one that had that kind of luck!

05-26-2009, 10:46 AM	#182
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: And so it begins................ and the worst of us __________________ *CHEVY ONLY*

05-26-2009, 12:31 PM	#183
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: And so it begins................

05-26-2009, 08:21 PM	#184
TheSebring Account Suspended Join Date: May 2009 Location: Noble,Ok Posts: 576	Re: And so it begins................ Especially the worst of us... Try to take out the fuel vent cannister to check if it's working properly and break the condenser. I looked like the hulk after that piece broke off. P*ssed, tearing my shirt off, and solid green .

05-26-2009, 10:49 PM	#186
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: And so it begins................ Any updates?? where are the new pics __________________ Scott 93 crew cab build Project 62

05-27-2009, 09:14 AM	#188
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ Yeah they are pretty much worthless unless you're an enviromental advocate. However, everything under the hood of that car was still factory until I gave it to jr. Now he is going to change it all! Last edited by highperf4x4; 05-27-2009 at 09:14 AM.

05-27-2009, 09:16 AM	#189
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ My fuel pump is trying to kick the bucket now. It's shooting gas all over the engine mount. It's making the gas fumes inside the cab alot worse!

05-27-2009, 09:27 AM	#190
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: And so it begins................ That's the important part to fix is the fumes inside the cab! Don't wanna have to smell that going down the road.

05-27-2009, 11:18 PM	#193
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: And so it begins................ Mmmm, smores Sooo good.... New fuel pump tonight??? __________________ *CHEVY ONLY*

05-27-2009, 11:23 PM	#194
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ yup, just a sec and I'll toss ya a pic! Last edited by highperf4x4; 05-27-2009 at 11:23 PM.

05-27-2009, 11:37 PM	#195
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ It took a couple hours and a couple flashlights but I finally got it. The big blocks don't leave much room to navigate!

05-27-2009, 11:48 PM	#196
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ And John, I put those rallys you sold me on the old mans truck today. They look alot "beefier" than the factory rallys. This first pic is his old wheels.

05-28-2009, 12:25 AM	#197
TheSebring Account Suspended Join Date: May 2009 Location: Noble,Ok Posts: 576	Re: And so it begins................ Did that lug wrench out of the Satellite do the trick for the spare key? I figured it would work, but did you find his old one? And yeah it does look a lot beefier. I need that same size in Mickey Thompson Bajas on my truck .



Register or Log In To remove these advertisements.

05-28-2009, 01:29 AM	#198
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: And so it begins................ He decided not to pull the spare yet. He can mount the 5th rim later.

05-28-2009, 07:45 AM	#199
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: And so it begins................ Cool! __________________ Scott 93 crew cab build Project 62

05-28-2009, 07:56 AM	#200
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: And so it begins................ They look sweet man! That custom paint job on those wheels really go well with the truck! Now I need to paint the ones that are on my truck now the way I did those.

Register or Log In To remove these advertisements.