Found it....295/50-15. Quick response plese. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Slammed70 · 06-02-2008, 01:19 PM

For $120 a peice, BFGs. Im about to go throw some money at the tire store guy. And I just wanted to make sure these would fit on a 15x8 rim?

ksucatz · 06-02-2008, 01:32 PM

They will fit. I had them on once. I think they are a little short for a truck. If they were 60 series, they would fill the wheel well better.

Gulf Rat · 06-02-2008, 01:34 PM

Quote:

Originally Posted by Slammed70

For $120 a peice, BFGs. Im about to go throw some money at the tire store guy. And I just wanted to make sure these would fit on a 15x8 rim?

Why not go with 275/60-15 they will fit, also taller 28". 295/50-15 rim width 8-11 perfered 9.5 tire only 26.7" tall. You check out all tire sizes @ www.tirerack.com put the size in that you need then check specs. hope this helps.

Gulf Rat

piecesparts · 06-02-2008, 02:49 PM

I am running 295/50/15s on 9" and 8" rims without trouble. However a few months ago, you could not find a 295/50/15 BFG to save your life in Wichita or anywhere close. I did find Coopers at Bosley's but that was all. Which store has the BFGs for sale?

Jim_PA · 06-02-2008, 02:51 PM

Here's what they look like on a 15X8 -- a little short as already noted...

This one gives a little better perspecitve on the amount of 'buldge'

Orange · 06-02-2008, 02:53 PM

295 is a wide tire on an 8" IMO. The widest I would put on 8" is a 285. I run 255's on my 8", 275's on my 10's. Both are 60's. BFG's.

DLB

piecesparts · 06-02-2008, 03:07 PM

I have been running 295s on 8" rims for a long time. My show truck is 9" rims, but the DD and my son's truck are 8" rims and no issue what ever.

OrangeCrush1970 · 06-02-2008, 03:08 PM

Here are some 275/60's on a 15x10" rim. Im planning on going back to them after I rub off all the rubber on my 265/75's but need to drop it down a couple of inches.

OrangeCrush1970 · 06-02-2008, 03:11 PM

Quote:

Originally Posted by Orange

295 is a wide tire on an 8" IMO. The widest I would put on 8" is a 285. I run 275's on my 8", 285's on my 10's. Both are 60's. BFG's.

DLB

Can you still find 285's? If so can you point me in the right direction? I saw that Coker had some 285 ww's...but Im looking for the RWL's

Myself · 06-02-2008, 05:15 PM

I'd say 8" wheel at the least. I've had no luck with BFG's as far as wear, especially on front. I like Dunlop much better. I've had Dayton's that wore good also.

Orange · 06-02-2008, 05:53 PM

Quote:

Originally Posted by OrangeCrush1970

Can you still find 285's? If so can you point me in the right direction? I saw that Coker had some 285 ww's...but Im looking for the RWL's

I apologize - I thought about this after I was home and thought about this thread.

No, you can't get the 285's.

I edited my post to say what I am correctly running. I had a brain fart/tongue slip.

Just an FYI though - Coker does offer a blackwall version of that whitewall they sell - but it isn't the Radial T/A.

They have 2 brand new 285/70/15's that they are going to make a remake of the BFG Radial T/A from eventually though.

I still have my old ones as well. They are kind of like that Auto Meter 3-3/8" Fuel Gauge.

DLB

shortbed70 · 06-02-2008, 07:57 PM

I have that tire on a 10" rim.

Blue_71 · 06-02-2008, 08:07 PM

aaand just to throw it into the mix.. here are 275/60/15 rear and 255/60/15s front on my 69

67chevyguy · 06-02-2008, 08:35 PM

hey blue_71, what rim width are you running on the front? and backspacing if you don't mind.
thanks

Blue_71 · 06-02-2008, 09:51 PM

not real sure on backspacing, but they're 8" wheels... factory 73-80 4x4 rallys

06-02-2008, 01:32 PM	#2
ksucatz Suppose to be workin........ Join Date: Jul 2001 Location: Shawnee, KS USA Posts: 164	Re: Found it....295/50-15. Quick response plese. They will fit. I had them on once. I think they are a little short for a truck. If they were 60 series, they would fill the wheel well better. __________________ Brent '68 C10 '70 C10 '72 LeMans "03 Trailblazer "Stupidity is like a skill, some are born with it and some develop it over a period of time."" Author unknown

06-02-2008, 02:49 PM	#4
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Found it....295/50-15. Quick response plese. I am running 295/50/15s on 9" and 8" rims without trouble. However a few months ago, you could not find a 295/50/15 BFG to save your life in Wichita or anywhere close. I did find Coopers at Bosley's but that was all. Which store has the BFGs for sale? Last edited by piecesparts; 06-02-2008 at 02:49 PM.

06-02-2008, 02:51 PM	#5
Jim_PA Registered User Join Date: May 2005 Location: PA Posts: 2,696	Re: Found it....295/50-15. Quick response plese. Here's what they look like on a 15X8 -- a little short as already noted... This one gives a little better perspecitve on the amount of 'buldge' Last edited by Jim_PA; 06-02-2008 at 02:53 PM.

06-02-2008, 02:53 PM	#6
Orange Licensed to Thrill! Join Date: Apr 2006 Location: Northwest, GA Posts: 1,673	Re: Found it....295/50-15. Quick response plese. 295 is a wide tire on an 8" IMO. The widest I would put on 8" is a 285. I run 255's on my 8", 275's on my 10's. Both are 60's. BFG's. DLB __________________ 1971 GMC.Lowered. Overdrive. Orange. Krue's excellent FAQ Index. Last edited by Orange; 06-02-2008 at 05:54 PM.

06-02-2008, 03:07 PM	#7
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Found it....295/50-15. Quick response plese. I have been running 295s on 8" rims for a long time. My show truck is 9" rims, but the DD and my son's truck are 8" rims and no issue what ever. Attached Images

06-02-2008, 03:08 PM	#8
OrangeCrush1970 Registered User Join Date: Jun 2007 Location: Smyrna, GA Posts: 709	Re: Found it....295/50-15. Quick response plese. Here are some 275/60's on a 15x10" rim. Im planning on going back to them after I rub off all the rubber on my 265/75's but need to drop it down a couple of inches. Attached Images __________________ *Rottenwood Garage* 1970...71...72 C1500 aka Orange aka Sideshow Bob 540 BB Straub Roller Cam, AFR Magnums, XP 950, TKO 600 2 Tons of Fun

06-02-2008, 05:15 PM	#10
Myself Registered User Join Date: Oct 2005 Location: Northern Arkansas Posts: 1,127	Re: Found it....295/50-15. Quick response plese. I'd say 8" wheel at the least. I've had no luck with BFG's as far as wear, especially on front. I like Dunlop much better. I've had Dayton's that wore good also.

06-02-2008, 07:57 PM	#12
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Found it....295/50-15. Quick response plese. I have that tire on a 10" rim. Attached Images __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

06-02-2008, 08:35 PM	#14
67chevyguy Registered User Join Date: Aug 2005 Location: Surrey , BC, Canada Posts: 83	Re: Found it....295/50-15. Quick response plese. hey blue_71, what rim width are you running on the front? and backspacing if you don't mind. thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.