|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-20-2015, 03:45 PM
|
#1 |
|
Registered User
Join Date: Jan 2008
Location: Hawthorne,CA
Posts: 114
|
1969 Gmc 3/4 ton pickup 8 lug rear end
Im in the process of swaping out the rear end. But was wondering if I could just make my life easier and instead of swaping out the entire rear end just change out the axles instead. with these
http://www.speedwaymotors.com/1965-1...Kit,46263.html Does any one know if this will work on a 3/4 ton or if the ECE axle conversions will work. |
|
|
|
09-20-2015, 05:40 PM
|
#2 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,714
|
Re: 1969 Gmc 3/4 ton pickup 8 lug rear end
No. You need a complete half ton axle housing assembly with the same attachement style as your truck. Coils and trailing arms or leafs depending on what you have.
The full-floater axles that were in the 3/4 ton trucks don't go together the same way as the half tonners.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
|
09-20-2015, 06:12 PM
|
#3 |
|
Registered User
Join Date: Oct 2008
Location: Marianna Arkansas
Posts: 7,257
|
Re: 1969 Gmc 3/4 ton pickup 8 lug rear end
Apples and oranges. The housing and everything related is different size. So if your cahnging to 5 lug you need a 5 lug rear. Jim
|
|
|
|
|
09-21-2015, 08:00 PM
|
#4 |
|
Registered User
Join Date: Jan 2008
Location: Hawthorne,CA
Posts: 114
|
Re: 1969 Gmc 3/4 ton pickup 8 lug rear end
Even if I have a 10 bolt rear end? Sorry for the newb questions. Just trying to convert it to 5 lug all the way around and looking for the quickest and most efficient route. I have a friend who had 8 lug in the back and these conversion axles worked for him.
|
|
|
|
|
| Bookmarks |
|
|
Linear Mode
