Daverods project 66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

neto · 04-20-2009, 06:01 PM

I sanded a little and my son came over to help with some filler work. Slick sand sands real nice even with 150. Yes the biggest tip was a 1.8. As for the rust bucket my truck was that till I cut and replaced all kinds of areas. The doors I think are shot so I'm going to find better ones.

daverod · 04-20-2009, 07:10 PM

Quote:

Originally Posted by neto

I sanded a little and my son came over to help with some filler work. Slick sand sands real nice even with 150. Yes the biggest tip was a 1.8. As for the rust bucket my truck was that till I cut and replaced all kinds of areas. The doors I think are shot so I'm going to find better ones.

Here I thought your truck was one of those few that are rust free. You did a good job. I had to put $500 in metal in mine, plus another $100 for the door bottoms. Oh and I still need two front fenders $400 more. Next time I'm going to Arizona to buy a truck. Might cost alittle in gas but I'm sure I'd be money ahead. Later

daverod · 04-23-2009, 07:55 PM

Parts fairy stopped by. Brought one of my door bottoms, I ordered two. They said the other one was back ordered. I see they still charged me for both. Been working on putting filler on and then sanding it off. It's surprising how many little dents you find. Kinda makes me wonder why I even primed it. Almost used a whole can just on the cab.

Hope to get my cab ready off some slick sand by Monday. Still waiting on my "How build a chevy short block book". Get my steering column on the 27th. Been on the look out for some 6 lug 20". I don't know why everyone switches to 5 lugs

there's lots of good 6 lug rims?

Strodder · 04-23-2009, 08:22 PM

Wish I was ready to start my body work. Need to make it run first.

Looken good Dave

daverod · 04-26-2009, 05:50 PM

Thought about drilling some holes in my crossmember. Thats about as far as that got. Fixed my door bottom and hung both doors. Still need to fix the bottom of the one. Cleaned off my transmission, pulled out my rear end, sanded on some stuff.

daverod · 04-26-2009, 05:57 PM

When to work on my truck got sidetracked and built some more storage areas. Now I can work on the truck. Got to go get me a rockstar first.

Alan's Classic · 04-26-2009, 08:08 PM

It's so easy to get sidetracked. It happens to me all of the time. Nice work your making some great progress.

04-20-2009, 06:01 PM	#1
neto Registered User Join Date: Jan 2007 Location: Madera, California Posts: 291	Re: Daverods project 66 I sanded a little and my son came over to help with some filler work. Slick sand sands real nice even with 150. Yes the biggest tip was a 1.8. As for the rust bucket my truck was that till I cut and replaced all kinds of areas. The doors I think are shot so I'm going to find better ones.

04-23-2009, 07:55 PM	#3
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Parts fairy stopped by. Brought one of my door bottoms, I ordered two. They said the other one was back ordered. I see they still charged me for both. Been working on putting filler on and then sanding it off. It's surprising how many little dents you find. Kinda makes me wonder why I even primed it. Almost used a whole can just on the cab. Hope to get my cab ready off some slick sand by Monday. Still waiting on my "How build a chevy short block book". Get my steering column on the 27th. Been on the look out for some 6 lug 20". I don't know why everyone switches to 5 lugs there's lots of good 6 lug rims? Attached Images

04-23-2009, 08:22 PM	#4
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: Daverods project 66 Wish I was ready to start my body work. Need to make it run first. Looken good Dave __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

04-26-2009, 05:50 PM	#5
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 Thought about drilling some holes in my crossmember. Thats about as far as that got. Fixed my door bottom and hung both doors. Still need to fix the bottom of the one. Cleaned off my transmission, pulled out my rear end, sanded on some stuff. Attached Images

04-26-2009, 05:57 PM	#6
daverod SSN 706 Join Date: Mar 2009 Location: Pocatello Idaho Posts: 3,821	Re: Daverods project 66 When to work on my truck got sidetracked and built some more storage areas. Now I can work on the truck. Got to go get me a rockstar first. Attached Images

04-26-2009, 08:08 PM	#7
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: Daverods project 66 It's so easy to get sidetracked. It happens to me all of the time. Nice work your making some great progress. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.