Pontiac "C-10" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

marcsRX · 09-01-2013, 10:44 PM

What the heck am I looking at here? Saw this the other day while out to dinner. Can not find any info on it. Did this guy just make his C10 look like a Pontiac?

mmiddle · 09-01-2013, 10:48 PM

Probably had a wiped out T/A sitting in his back yard and thought..... what the heck, it'll be different

slow-1 · 09-01-2013, 10:49 PM

Interesting...looks well done.

68gmsee · 09-01-2013, 10:53 PM

No, Pontiac didn't make c10's. Nice truck and neat gimmick -I guess.

rcrahn · 09-01-2013, 11:26 PM

I'm digging it....NICE!

mmiddle · 09-01-2013, 11:34 PM

The more I look at the pictures..... I kinda like it! He did it up classy. At least he omitted the Bird on the hood.

It's not for me, but I like it. I would have left off the grill inserts and just put an Arrow Head in the center.

**Stocker** · 09-01-2013, 11:36 PM

Hmmm, what engine do ya suppose he has under that scoop?

67_C-30 · 09-02-2013, 12:01 AM

Quote:

Originally Posted by Stocker

Hmmm, what engine do ya suppose he has under that scoop?

Ram Air IV or 455 SD, perhaps? I'm a Pontiac guy, but I'm not sure if I like the Poncho treatment on a C-10 - but hey - it could have a chopped top or a 88-98 bed on it, so it could definitely be worse!

dakattack7 · 09-02-2013, 12:28 AM

I like it and I'm a purist, tasteful and relatively subtle but distinctive

In The Ten Ring · 09-02-2013, 02:26 AM

*Newbie cop, young guy, first time out on the road.

"Control, this is unit 141, need you to run the plates on a gold Pontiac pickup truck." "Affirmative, I said Pontiac..."

LOL

MikeyMan · 09-02-2013, 03:29 AM

Pre curser to the Escalade

Poor, Old, ......

dbstepside · 09-02-2013, 06:47 AM

I kind of like it. It looks ok and alot better than some trucks. To each thier own and i bet he gets alot of questions about it.

Steve Hafner · 09-02-2013, 07:21 AM

. . . .

I thought it might be a "Canadian" version, but I can't find any information about them.

There were some "different looking" cars made by Holden in Australia too.

This 1966 Canadian "Nova" Acadian Canso of which only 83 were ever made, is a good example of models made in different countries.

. . . .

**special-K** · 09-02-2013, 07:40 AM

Pretty cool. I like everything about it except,personally,the crossed up years don't fit my taste. I actually have a similar idea I've considered for my '67 GMC project,but more mechanical than appearance and more era-correct. It all started with the M22 I have for it from a '65 GTO. I figure the GMCs and Pontiacs were sold together,for the most part. Since almost all '67s had 6s,the vibe would be a truck done by a Pontiac wrench who would have a good connection to deals on cast-off Pontiac (warrantied) mechanicals,the ability to easily rebuild,and easy access to parts with a healthy discount. I did work for a guy that I could get a '65 389/3spd Bonnie from for the taking. See where I'm going? My budget is tight these days and I already have a built 327 ready for it,so I dunno. But,I do have a '65 GTO steering wheel,bucket seats,vacuum gauge in pod,and hubcaps!!

In Canada the GMCs had few differences,but the only cosmetic thing was the fender badges. Here's the only Pontiac pickup I know of,other than Utes:

FL71C10 · 09-02-2013, 07:42 AM

I was wondering if Pontiac sold trucks in Canada too, and was going to google it.
Posted via Mobile Device

DGulliver · 09-02-2013, 08:54 AM

Since we also have 7 of the 2nd gen, Trans Ams, I like it. Somebody took their engine swap VERY seriously. I thought it was pretty nicely done, sort of a "what if" truck. Plus, it combines 2 of my favorite vehicles.

Now I'm getting ideas about all these extra C10 and Trans Am parts I have around....

TobyArnot · 09-02-2013, 08:57 AM

Met this guy while I was living in So-Cal. He was a regular at the Fuddruckers Cruise-in on El Toro in Lake Forest, Ca. That's my old '62 Bel-Air next to it.

68Stepbed · 09-02-2013, 08:58 AM

I bet he calls it a P10.

Eddie H. · 09-02-2013, 09:12 AM

I kinda like it. It would be better if it was a GMC, since GMC has always had a close association with Pontiac. They used Pontiac V8 engine in their trucks from 1955 to 1959.

**special-K** · 09-02-2013, 11:09 AM

Quote:

Originally Posted by TobyArnot

Met this guy while I was living in So-Cal. He was a regular at the Fuddruckers Cruise-in on El Toro in Lake Forest, Ca. That's my old '62 Bel-Air next to it.

I grabbed pictures of his El Cabra years ago off of www.socalcarculture.com and always loved that thing. That's cool you saw it up close and talked to the guy.

Quote:

Originally Posted by 68Stepbed

I bet he calls it a P10.

How about C-body Pontiac?

Quote:

Originally Posted by Eddie H.

I kinda like it. It would be better if it was a GMC, since GMC has always had a close association with Pontiac. They used Pontiac V8 engine in their trucks from 1955 to 1959.

That's how I feel. I'm thinking the GMC grille has the divide,same as Pontiac and with the dual headlights the Firebird grille inserts might have fit or could have been made to fit. The Pontiac arrowhead could have been in the center bar and if they used a 71/72 the black accents (or whole grille) could be painted body color

Here's another nice custom-built El Cabra:

67_C-30 · 09-02-2013, 11:14 AM

Quote:

Originally Posted by special-K

Pretty cool. I like everything about it except,personally,the crossed up years don't fit my taste. I actually have a similar idea I've considered for my '67 GMC project,but more mechanical than appearance and more era-correct. It all started with the M22 I have for it from a '65 GTO. I figure the GMCs and Pontiacs were sold together,for the most part. Since almost all '67s had 6s,the vibe would be a truck done by a Pontiac wrench who would have a good connection to deals on cast-off Pontiac (warrantied) mechanicals,the ability to easily rebuild,and easy access to parts with a healthy discount. I did work for a guy that I could get a '65 389/3spd Bonnie from for the taking. See where I'm going? My budget is tight these days and I already have a built 327 ready for it,so I dunno. But,I do have a '65 GTO steering wheel,bucket seats,vacuum gauge in pod,and hubcaps!!

In Canada the GMCs had few differences,but the only cosmetic thing was the fender badges. Here's the only Pontiac pickup I know of,other than Utes:

That would be really cool, Tim! I've always connected GMC and Pontiac as well. If you lived closer, I'd give you a great deal on a Pontiac 400 with '65 #76 heads and factory 4 barrel AFB intake, if you wanted it, to make the swap even closer. GMC's came with Pontiac V8's until the V6's were introduced in 1960, and Pontiac engines are excellent truck engines with their insane torque. You could run some pontiac twin exhaust splitters to add a little more Poncho to it.

The Pontiac poverty caps are some of the best looking dog dishes there are out there, and would look awesome on a set of 8" steelies with a 4/6 drop. I'm riding around with a set of those on my '67 GTO right while I'm working on it.

**special-K** · 09-02-2013, 11:26 AM

Yep,the tailpipes would be the icing on the cake,run like stacks,right?

Oh no,now you went and planted that seed. Alabama ain't that far! I was thinking on running down and buying Josh's '67 bed he was selling a couple weeks ago,then decided to stay with my woodfloor deal I already have (& have powder coated BBC heat shields I just bought). I have red powder coated 8" 5-lugs the caps will look great on. Considering a set of chrome reverse. The reflection on the rim would look awesome. If I had a car it would be a Pontiac. I had a burgundy w/black vinyl top '65 GTO once upon a time. This truck has a long way to go,so never can tell.

67_C-30 · 09-02-2013, 11:45 AM

Quote:

Originally Posted by special-K

Yep,the tailpipes would be the icing on the cake,run like stacks,right?

Oh no,now you went and planted that seed. Alabama ain't that far! I was thinking on running down and buying Josh's '67 bed he was selling a couple weeks ago,then decided to stay with my woodfloor deal I already have (& have powder coated BBC heat shields I just bought). I have red powder coated 8" 5-lugs the caps will look great on. Considering a set of chrome reverse. The reflection on the rim would look awesome. If I had a car it would be a Pontiac. I had a burgundy w/black vinyl top '65 GTO once upon a time. This truck has a long way to go,so never can tell.

67_C-30 · 09-02-2013, 11:49 AM

Quote:

Originally Posted by special-K

Yep,the tailpipes would be the icing on the cake,run like stacks,right?

Oh no,now you went and planted that seed. Alabama ain't that far! I was thinking on running down and buying Josh's '67 bed he was selling a couple weeks ago,then decided to stay with my woodfloor deal I already have (& have powder coated BBC heat shields I just bought). I have red powder coated 8" 5-lugs the caps will look great on. Considering a set of chrome reverse. The reflection on the rim would look awesome. If I had a car it would be a Pontiac. I had a burgundy w/black vinyl top '65 GTO once upon a time. This truck has a long way to go,so never can tell.

I wonder how a body colored GMC grill would look. It may give it an endura nose look, if you had a GMC grille that was painted or had bad chrome.

67_C-30 · 09-02-2013, 11:55 AM

If you wanted 17's later, the US Mags Bandit wheels that I going to run on my GTO would look awesome on a truck too!

(I'm sorry for the bad influencing Tim, I just love Pontiacs!

)

09-01-2013, 10:44 PM	#1
marcsRX 68 C10 SWB Join Date: Nov 2009 Location: Chicago Posts: 216	Pontiac "C-10" What the heck am I looking at here? Saw this the other day while out to dinner. Can not find any info on it. Did this guy just make his C10 look like a Pontiac? __________________ "How much physical pain do you go through on a daily basis that you can directly attribute to your lack of intelligence?" -R0bman

09-01-2013, 10:48 PM	#2
mmiddle Registered User Join Date: Jul 2013 Location: Forestburg, Texas Posts: 659	Re: Pontiac "C-10" Probably had a wiped out T/A sitting in his back yard and thought..... what the heck, it'll be different __________________ Mark Jesus is the Way! 2003 2500HD CCLB Duramax/Ali (Clifford) 2014 2SS/RS black on black Camaro (Betty) 2006 Pontiac SOLSTICE silver/black (Lula-Bell) 1970 C/10 Short Wide (Peggy) 1964 C/10 Short Step (Hambone) RIP Jimmy Hamilton Thank you for the trucks

09-01-2013, 10:49 PM	#3
slow-1 Registered User Join Date: May 2013 Location: Central NC Posts: 830	Re: Pontiac "C-10" Interesting...looks well done. __________________ 1972 Cheyene C-10 "Ole Green" My Grandfathers truck (early 70's to 1983) My first vehicle (1983) Original 350 (3 rebuilds) 700R4 from Bowtie Overdrives

09-01-2013, 10:53 PM	#4
68gmsee Active Member Join Date: Jul 2007 Location: Centrally located between Houston, Austin and Waco. BCS area. Posts: 7,947	Re: Pontiac "C-10" No, Pontiac didn't make c10's. Nice truck and neat gimmick -I guess. __________________ 68 GMC 250/3 speed Saginaw p/b p/s 69 Chevy 350/350 currently in pieces still lookin for a cab 06 Trailblazer I just want a vehicle that I can work on, that won't talk to me, leave error msgs or keep track of how I drive...

09-01-2013, 11:26 PM	#5
rcrahn Registered User Join Date: Jun 2007 Location: The West Posts: 767	Re: Pontiac "C-10" I'm digging it....NICE!

09-01-2013, 11:34 PM	#6
mmiddle Registered User Join Date: Jul 2013 Location: Forestburg, Texas Posts: 659	Re: Pontiac "C-10" The more I look at the pictures..... I kinda like it! He did it up classy. At least he omitted the Bird on the hood. It's not for me, but I like it. I would have left off the grill inserts and just put an Arrow Head in the center. __________________ Mark Jesus is the Way! 2003 2500HD CCLB Duramax/Ali (Clifford) 2014 2SS/RS black on black Camaro (Betty) 2006 Pontiac SOLSTICE silver/black (Lula-Bell) 1970 C/10 Short Wide (Peggy) 1964 C/10 Short Step (Hambone) RIP Jimmy Hamilton Thank you for the trucks

09-01-2013, 11:36 PM	#7
Stocker 20' Daredevil (Ret) Join Date: May 2003 Location: Jefferson State Posts: 13,497	Re: Pontiac "C-10" Hmmm, what engine do ya suppose he has under that scoop? __________________ - Mike - 1972 K20 LWB 350/350/205 RIP El Jay

09-02-2013, 12:28 AM	#9
dakattack7 Registered User Join Date: Feb 2013 Location: az Posts: 177	Re: Pontiac "C-10" I like it and I'm a purist, tasteful and relatively subtle but distinctive

09-02-2013, 02:26 AM	#10
In The Ten Ring Registered User Join Date: Jun 2013 Location: West Virginia Posts: 6,421	Re: Pontiac "C-10" *Newbie cop, young guy, first time out on the road. "Control, this is unit 141, need you to run the plates on a gold Pontiac pickup truck." "Affirmative, I said Pontiac..." LOL

09-02-2013, 03:29 AM	#11
MikeyMan Registered User Join Date: May 2008 Location: S.W. Chicago, IL. Posts: 317	Re: Pontiac "C-10" Pre curser to the Escalade Poor, Old, ......

09-02-2013, 06:47 AM	#12
dbstepside Registered User Join Date: Dec 2010 Location: murray ky Posts: 351	Re: Pontiac "C-10" I kind of like it. It looks ok and alot better than some trucks. To each thier own and i bet he gets alot of questions about it.

09-02-2013, 07:21 AM	#13
Steve Hafner Registered User Join Date: Sep 2010 Location: Northport, Alabama Posts: 1,353	Re: Pontiac "C-10" . . . . I thought it might be a "Canadian" version, but I can't find any information about them. There were some "different looking" cars made by Holden in Australia too. This 1966 Canadian "Nova" Acadian Canso of which only 83 were ever made, is a good example of models made in different countries. . . . . Attached Images Last edited by Steve Hafner; 09-02-2013 at 07:27 AM.

09-02-2013, 07:40 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Pontiac "C-10" Pretty cool. I like everything about it except,personally,the crossed up years don't fit my taste. I actually have a similar idea I've considered for my '67 GMC project,but more mechanical than appearance and more era-correct. It all started with the M22 I have for it from a '65 GTO. I figure the GMCs and Pontiacs were sold together,for the most part. Since almost all '67s had 6s,the vibe would be a truck done by a Pontiac wrench who would have a good connection to deals on cast-off Pontiac (warrantied) mechanicals,the ability to easily rebuild,and easy access to parts with a healthy discount. I did work for a guy that I could get a '65 389/3spd Bonnie from for the taking. See where I'm going? My budget is tight these days and I already have a built 327 ready for it,so I dunno. But,I do have a '65 GTO steering wheel,bucket seats,vacuum gauge in pod,and hubcaps!! In Canada the GMCs had few differences,but the only cosmetic thing was the fender badges. Here's the only Pontiac pickup I know of,other than Utes: Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 09-02-2013 at 07:57 AM.

09-02-2013, 07:42 AM	#15
FL71C10 Registered User Join Date: Jun 2010 Location: Orlando, Florida Posts: 2,506	Re: Pontiac "C-10" I was wondering if Pontiac sold trucks in Canada too, and was going to google it. Posted via Mobile Device __________________ 71 Chevy C10 Shortbed Stepside. LT1 with 4l60E. Just got back from painter, in assembly now.

09-02-2013, 08:54 AM	#16
DGulliver Registered User Join Date: Jul 2009 Location: Southern TN Posts: 227	Re: Pontiac "C-10" Since we also have 7 of the 2nd gen, Trans Ams, I like it. Somebody took their engine swap VERY seriously. I thought it was pretty nicely done, sort of a "what if" truck. Plus, it combines 2 of my favorite vehicles. Now I'm getting ideas about all these extra C10 and Trans Am parts I have around.... __________________ '72 Chevrolet Step Side 350/TH350, '63 C10 Step V8 '74 Trans Am 400, '80 Trans Am Indy Pace Car Mercedes AMG S55, SLK230 Kompressor, GL450 '96 Dodge Indy Ram Official Indy Truck '99 Porsche 911 Carrera



Register or Log In To remove these advertisements.

09-02-2013, 08:57 AM	#17
TobyArnot Quit if it's not FUN!!! Join Date: Jul 2010 Location: Indian Trail, N.C, Posts: 864	Re: Pontiac "C-10" Met this guy while I was living in So-Cal. He was a regular at the Fuddruckers Cruise-in on El Toro in Lake Forest, Ca. That's my old '62 Bel-Air next to it. Attached Images

09-02-2013, 08:58 AM	#18
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: Pontiac "C-10" I bet he calls it a P10. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

09-02-2013, 09:12 AM	#19
Eddie H. Registered User Join Date: Mar 2001 Location: Paradise TX USA Posts: 1,200	Re: Pontiac "C-10" I kinda like it. It would be better if it was a GMC, since GMC has always had a close association with Pontiac. They used Pontiac V8 engine in their trucks from 1955 to 1959. __________________ "Negative people always seem to have a problem for every solution"

09-02-2013, 11:26 AM	#22
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Pontiac "C-10" Yep,the tailpipes would be the icing on the cake,run like stacks,right? Oh no,now you went and planted that seed. Alabama ain't that far! I was thinking on running down and buying Josh's '67 bed he was selling a couple weeks ago,then decided to stay with my woodfloor deal I already have (& have powder coated BBC heat shields I just bought). I have red powder coated 8" 5-lugs the caps will look great on. Considering a set of chrome reverse. The reflection on the rim would look awesome. If I had a car it would be a Pontiac. I had a burgundy w/black vinyl top '65 GTO once upon a time. This truck has a long way to go,so never can tell. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-02-2013, 11:55 AM	#25
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: Pontiac "C-10" If you wanted 17's later, the US Mags Bandit wheels that I going to run on my GTO would look awesome on a truck too! (I'm sorry for the bad influencing Tim, I just love Pontiacs! ) __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

Register or Log In To remove these advertisements.