Post Your Straight Six Pics! - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Gokart Mozart · 02-18-2012, 12:14 AM

http://67-72chevytrucks.com/vboard/s...d.php?t=406441

Quote:

Originally Posted by raycow

235/261 covers 54-62 had the script on them. I have never seen a later six with the script, but there is no reason why yours couldn't be the first. Have a laser cutting outfit cut the script out of brass sheet. Buff it so the top corners are rounded and solder it onto your cover. After painting, it should like it grew there.

Ray

Quote:

Originally Posted by '68OrangeSunshine

Early models of the L-22 series L6s had the raised script valve covers. '63 to '65 or '66. When GM started painting the sixes in Orange, the covers got plainer.

shawno72 · 02-18-2012, 01:42 AM

My 68 with the original 292 has a script valve cover. And about two weeks ago I picked up a chrome script valve cover from the junk yard.
Posted via Mobile Device

**'68OrangeSunshine** · 02-19-2012, 07:53 AM

Quote:

Originally Posted by shawno72

My 68 with the original 292 has a script valve cover. And about two weeks ago I picked up a chrome script valve cover from the junk yard.
Posted via Mobile Device

Could be an early '68 production, or a truck not originally made in California.
I know my original engine had a plain valve cover, and the only one who messed with it since 1973 was me. My truck was a Fremont build in late '68.
In this pic, I painted the valve cover cast iron grey to get the look of a cast aluminum Clifford or Offy cover [which I can't afford, even if I did find one.]

camrycurt · 02-23-2012, 03:28 PM

Here's my 230. It's amazing to me how tough this little engine is - I've had the truck about two years now and basically everything I've touched on the engine in that time has been broken, but the thing has run the whole time.

Of course, whenever I fix something it runs a whole lot better, and each time I think to myself, "How in the world was this thing running without that working?"

RAS C-10 · 02-23-2012, 08:51 PM

Well, finally got some pics into this thread, been meaning to do it but better late than never!

68 IRON · 02-23-2012, 09:53 PM

Mine looks like this
Name: HansTruck 016.jpg
Views: 1873
Size: 50.2 KB

...but imagine PS, PB, and 3 speed OD. I hope I have the chance to do this soon! Oh ya, the Chevrolet valve cover (the cherry on top). I pulled the valve cover off of a 64 with a 292

68 IRON · 02-23-2012, 09:58 PM

Mine looks like this
Attachment 878314
...but imagine PS, PB, and 3 speed OD. I hope I have the chance to do this soon! Oh ya, the Chevrolet valve cover (the cherry on top). I pulled the valve cover off of a 64 with a 292

*Achevytruck* · 02-18-2012, 02:34 AM

pritch good to and great your being honest about it and thank you did not see that intell you said somthing and most like it would be found in some other state , Gokart Mozart thank you for the info so i know now a 235/261. shawno72 that is really good to know your 292 had it , most likey some have keep there eyes open for

**'68OrangeSunshine** · 03-15-2012, 07:22 AM

Carretera, who did your lump porting?

carretera · 03-15-2012, 11:42 AM

Quote:

Originally Posted by '68OrangeSunshine

Carretera, who did your lump porting?

Neil, a friend and master mechanic that put the engine together for me. The lumps I bought from Mike, mrhotrod6@bellsouth.net.

**'68OrangeSunshine** · 03-16-2012, 08:07 AM

Quote:

Originally Posted by carretera

Neil, a friend and master mechanic that put the engine together for me. The lumps I bought from Mike, mrhotrod6@bellsouth.net.

OK, fine. I thought it might have been Larry Page, "Twisted6" on www.inliners.org. He is [or was] the president of I/I Orlando chapter. I know he was making lump port pieces a while ago.
I picked up an assembly- resto manual for the triple nickle Chevys at a used book store. What surprised me was the LX circuit design and even color code was very close to my '68 C/10 pick-up.

jchav62 · 03-15-2012, 10:34 AM

Here's the recently resurrected 250 in my '67. My buddy Abe gave me this engine when I bought the project. It had been sitting in his garage for years! It needed a little help from some trans fluid to fire up but now she runs great! Fires right up everytime...

Other than the trans fluid, all I did was clean it, paint it and drop in and HEI.

usaf1nate · 04-18-2012, 09:20 AM

here is my 250 going in a 67 GMC long backed by a s10 T5 got the offy valve cover and side plates but waiting till I'm ready to put it in

Shaky · 04-18-2012, 03:39 PM

Quote:

Originally Posted by usaf1nate

here is my 250 going in a 67 GMC long backed by a s10 T5 got the offy valve cover and side plates but waiting till I'm ready to put it in

That thing looks excellent - but must see BIGGER PICS!

redmonster · 04-18-2012, 10:20 PM

What is an s10 t 5
Posted via Mobile Device

**Tmend** · 04-18-2012, 11:02 PM

Quote:

Originally Posted by redmonster

What is an s10 t 5
Posted via Mobile Device

It's a mid to late 80's and early 90's 5 speed aluminum trans.. I'm running the same set up.
Posted via Mobile Device

longbed67 · 04-18-2012, 11:09 PM

How have I missed this!

usaf1nate · 04-19-2012, 02:09 AM

Bigger pic

Shaky · 04-19-2012, 05:49 AM

Quote:

Originally Posted by usaf1nate

Bigger pic

Sweet. Are those Sanderson headers? Are you gonna run duals all the way back or "Y" it together?

usaf1nate · 04-19-2012, 06:15 AM

Quote:

Originally Posted by Shaky

Sweet. Are those Sanderson headers? Are you gonna run duals all the way back or "Y" it together?

No they are Langdon headers most likely will be running duals with porter mufflers

longbed67 · 04-19-2012, 07:26 AM

Might as well throw up mine...

Jimbabwe · 04-23-2012, 09:33 PM

Quote:

Originally Posted by usaf1nate

Bigger pic

I like that a lot. Very sharp.

50bomb · 04-19-2012, 11:39 AM

This post is the reason why I am not completing my sbc350. Gonna sell it and buy me a INLINE 6.

VWNate1 · 04-19-2012, 05:05 PM

DRAT !

I just tried to download some pix and my ipod thingie died....

I'll give it a go to - morrow , I even got some nice pix of my folding back bench seat with pockets....

I've been a 6 Banger lover since long before these trucks were made , L6's just keep on going , and going , and going..........

No V-ate ever made has the longevity of an InLiner .

carretera · 04-20-2012, 06:29 PM

Finally got the 292 running, excellent power!

Yes, I know it's not a truck but it is a truck engine!

02-18-2012, 01:42 AM	#2
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Post Your Straight Six Pics! My 68 with the original 292 has a script valve cover. And about two weeks ago I picked up a chrome script valve cover from the junk yard. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-23-2012, 03:28 PM	#4
camrycurt Registered User Join Date: Jul 2010 Location: Leesburg, VA Posts: 420	Re: Post Your Straight Six Pics! Here's my 230. It's amazing to me how tough this little engine is - I've had the truck about two years now and basically everything I've touched on the engine in that time has been broken, but the thing has run the whole time. Of course, whenever I fix something it runs a whole lot better, and each time I think to myself, "How in the world was this thing running without that working?" Attached Images __________________ Curt 1970 C/10, 250 L6 with Rochester BV carb, SM465 4 speed, 3.73 open rear

02-23-2012, 08:51 PM	#5
RAS C-10 Registered User Join Date: Aug 2011 Location: Anderson, SC Posts: 36	Re: Post Your Straight Six Pics! Well, finally got some pics into this thread, been meaning to do it but better late than never! Attached Images __________________ If you think nobody cares if you're alive, try missing a couple of payments.

02-23-2012, 09:53 PM	#6
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: Post Your Straight Six Pics! Mine looks like this ...but imagine PS, PB, and 3 speed OD. I hope I have the chance to do this soon! Oh ya, the Chevrolet valve cover (the cherry on top). I pulled the valve cover off of a 64 with a 292

02-23-2012, 09:58 PM	#7
68 IRON Registered User Join Date: Sep 2010 Location: Olympia, WA Posts: 736	Re: Post Your Straight Six Pics! Mine looks like this Attachment 878314 ...but imagine PS, PB, and 3 speed OD. I hope I have the chance to do this soon! Oh ya, the Chevrolet valve cover (the cherry on top). I pulled the valve cover off of a 64 with a 292

02-18-2012, 02:34 AM	#8
Achevytruck Account Suspended Join Date: Feb 2012 Location: Alva FL Posts: 197	Re: Post Your Straight Six Pics! pritch good to and great your being honest about it and thank you did not see that intell you said somthing and most like it would be found in some other state , Gokart Mozart thank you for the info so i know now a 235/261. shawno72 that is really good to know your 292 had it , most likey some have keep there eyes open for

03-15-2012, 07:22 AM	#9
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,077	Re: Post Your Straight Six Pics! Carretera, who did your lump porting? __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

03-15-2012, 10:34 AM	#12
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Post Your Straight Six Pics! Here's the recently resurrected 250 in my '67. My buddy Abe gave me this engine when I bought the project. It had been sitting in his garage for years! It needed a little help from some trans fluid to fire up but now she runs great! Fires right up everytime... Other than the trans fluid, all I did was clean it, paint it and drop in and HEI. Attached Images __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

04-18-2012, 09:20 AM	#13
usaf1nate Registered User Join Date: Feb 2010 Location: Minot, ND Posts: 8	Re: Post Your Straight Six Pics! here is my 250 going in a 67 GMC long backed by a s10 T5 got the offy valve cover and side plates but waiting till I'm ready to put it in Attached Images

04-18-2012, 10:20 PM	#15
redmonster Registered User Join Date: Dec 2008 Location: EL PASO,TEJAS Posts: 212	Re: Post Your Straight Six Pics! What is an s10 t 5 Posted via Mobile Device __________________ WITNESS Dont be like me be better than me

04-18-2012, 11:09 PM	#17
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Post Your Straight Six Pics! How have I missed this! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

04-19-2012, 02:09 AM	#18
usaf1nate Registered User Join Date: Feb 2010 Location: Minot, ND Posts: 8	Re: Post Your Straight Six Pics! Bigger pic Attached Images

04-19-2012, 07:26 AM	#21
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: Post Your Straight Six Pics! Might as well throw up mine... Attached Images __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

04-19-2012, 11:39 AM	#23
50bomb Registered User Join Date: Jul 2010 Location: Hemet,Ca Posts: 1,502	Re: Post Your Straight Six Pics! This post is the reason why I am not completing my sbc350. Gonna sell it and buy me a INLINE 6.

04-19-2012, 05:05 PM	#24
VWNate1 Registered User Join Date: Feb 2012 Location: So. Cali. Posts: 2,610	Re : Straight Six Pix ! DRAT ! I just tried to download some pix and my ipod thingie died.... I'll give it a go to - morrow , I even got some nice pix of my folding back bench seat with pockets.... I've been a 6 Banger lover since long before these trucks were made , L6's just keep on going , and going , and going.......... No V-ate ever made has the longevity of an InLiner . __________________ -Nate Geezer '49 3100 235 W/ Muncie SM420 SOLD '69 C/10 shortbed sidemount survivor 250 L6 W/ 350TH



Register or Log In To remove these advertisements.

04-20-2012, 06:29 PM	#25
carretera Registered User Join Date: Mar 2012 Location: Hialeah Posts: 6	Re: Post Your Straight Six Pics! Finally got the 292 running, excellent power! Yes, I know it's not a truck but it is a truck engine! Attached Images

Register or Log In To remove these advertisements.