The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 08-19-2019, 12:52 AM   #1
74chevylvr
Registered User
 
Join Date: Apr 2019
Location: San Diego, CA
Posts: 19
What is the correct oil sending unit?

I updated my 74 with the harness out of 78. The oil sender plug looks like it has two prongs vs the oil sender which only has one. What oil sending unit would be correct for me to use with a two prongs connection?
74chevylvr is offline   Reply With Quote
Old 08-19-2019, 08:07 AM   #2
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,575
Re: What is the correct oil sending unit?

The one for the gauge has a single tab on it, BUT make sure you get one for the gauge and not the idiot lite version, both have a single tab. The dual tab one is used to transfer 12V to the electric choke when there is oil pressure and also causes the choke light to come on when there is low oil pressure.

This is mine on a 6 cylinder, but it is the same on a V8. I don't have any from my old truck with V8 because we eliminated the 2-prong one and ran our own 12V for the Carb choke.
Attached Images
 
__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is offline   Reply With Quote
Old 08-19-2019, 08:27 AM   #3
74chevylvr
Registered User
 
Join Date: Apr 2019
Location: San Diego, CA
Posts: 19
Re: What is the correct oil sending unit?

So what should I do with the two prong.connection on the harness? Do I simply cut it off and put on a spade connection? Or is there a specific prong hole I should use? My 74 still has a manual choke
74chevylvr is offline   Reply With Quote
Old 08-19-2019, 03:32 PM   #4
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,575
Re: What is the correct oil sending unit?

There should be a tan wire for the oil pressure sensor, if your harness came from one for a gauge. A dark blue and pinkish wire is probably going to that 2 prong one, which neither are for the gauge. I have not had a truck with warning lights only panel, so I don't know if the tan wire is in all harnesses or not.
Attached Images
 
__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is offline   Reply With Quote
Old 08-19-2019, 03:33 PM   #5
74chevylvr
Registered User
 
Join Date: Apr 2019
Location: San Diego, CA
Posts: 19
Re: What is the correct oil sending unit?

Yup I have a tan wire. So just clip that one and put the correct end on?
74chevylvr is offline   Reply With Quote
Old 08-19-2019, 04:01 PM   #6
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,575
Re: What is the correct oil sending unit?

Yep
__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 03:54 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com