The LS1 swap headers are done!!!! - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

brossow · 07-22-2009, 12:27 AM

Just a quick note for anyone else looking for a dipstick. There's a typo in the first post in the thread. The correct part number for the Lokar dipstick is ED-5008 and not ED-5800 as listed. Hope this helps someone!

brossow · 07-23-2009, 02:20 PM

Ordering update: Just got off the phone with Nick @ Thorley and he's no longer offering the discounted price mentioned in the first post, but one of their distributors (BJ's Off-Road) is. Just finished placing my order. Here's the contact info:

Phone: 253-265-6678, ask for Brent (no, not me!)
URL: bjsoffroad.com (these aren't on their site, however)

My price was $525 plus $30 shipping to Minnesota. Nick @ Thorley sent an IM to Brent @ BJ's and Brent called me back within a couple minutes of my hanging up with Nick. Friendly, painless transaction.

It should go without saying, but just in case ... I have no connection whatsoever with this business except having placed an order with them. Posting this info to help save someone a phone call.

Brent

'72customdeluxe · 07-23-2009, 03:42 PM

Hey, do your tri-y headers for the original style small block in a C10 hang below the frame?

boostat4500 · 07-23-2009, 07:58 PM

Still wondering if these will work in a 4x4? Anybody? Thanks.

BigShoe24 · 07-23-2009, 10:16 PM

These look pretty quality. Anyone think they'd fit a 5.7 with a 4l80e mounted to a Porterbuilt Dropmember. This is all stuffed in a 67 btw. Thanks in advance.

shrtbx · 07-29-2009, 01:22 AM

are your 73-87 ls1 headers carb approved? making a swap in a few months and was curious

Shon · 07-29-2009, 09:44 AM

if somoene will answer their PM I will become a sponsor here and offer these headers at a GOOD price!

green68 · 07-29-2009, 09:58 PM

this may help with anyone using doug thorley headers with 383.
Name: HECK, MOTOR IPHONE 4-25-09 011.jpg
Views: 2802
Size: 50.8 KB

Name: HECK, MOTOR IPHONE 4-25-09 012.jpg
Views: 2359
Size: 75.0 KB

Name: HECK, MOTOR IPHONE 4-25-09 013.jpg
Views: 2211
Size: 68.1 KB

Name: HECK, MOTOR IPHONE 4-25-09 016.jpg
Views: 2120
Size: 33.6 KB

Name: HECK, MOTOR IPHONE 4-25-09 020.jpg
Views: 2172
Size: 69.0 KB

Shon · 07-30-2009, 08:31 AM

I am now a site vendor!!
These headers I will ship out to you for $535.

I will get them added to the website soon, but until then please PM me and I will get payment information set up for you!

THANKS!!

BigShoe24 · 07-31-2009, 10:43 AM

Quote:

Originally Posted by BigShoe24

These look pretty quality. Anyone think they'd fit a 5.7 with a 4l80e mounted to a Porterbuilt Dropmember. This is all stuffed in a 67 btw. Thanks in advance.

Anyone care to chime in.

70 CST 4X4 · 07-31-2009, 08:56 PM

What is up with the right side collector? is it angled down?

Quote:

Originally Posted by green68

this may help with anyone using doug thorley
headers with 383.
Attachment 483125

Attachment 483126

Attachment 483127

Attachment 483128

Attachment 483129

green68 · 08-01-2009, 10:36 AM

Quote:

Originally Posted by 70 CST 4X4

What is up with the right side collector? is it angled down?

oh, is that a problem? they told me not to look under my truck. do you think i got screwed?

brossow · 08-01-2009, 11:46 AM

Quote:

Originally Posted by green68

oh, is that a problem? they told me not to look under my truck. do you think i got screwed?

Prathbun · 08-01-2009, 02:04 PM

Here are my pics. This is a '69 frame with a 5.3 / 4lL60.

Will the exhaust man be able to make a slight bent in my exhaust pipe (just out of the header) to make it up and over the OEM cross member??

Also, I need more information on the plug wires I need to use. I would like to find some that are already cut to the proper length. Any ideas??

If you look close, I had already cut my frame before I bought these.

Very pleased with these headers!!!

Shon · 08-01-2009, 02:09 PM

Quote:

Originally Posted by Prathbun

Here are my pics. This is a '69 frame with a 5.3 / 4lL60.

Will the exhaust man be able to make a slight bent in my exhaust pipe (just out of the header) to make it up and over the OEM cross member??

Also, I need more information on the plug wires I need to use. I would like to find some that are already cut to the proper length. Any ideas??

My stock exhaust ran UNDER that crossmember, that is how i plan on running it this time (duals).
there are MSD or Taylor wires that can be used. MSD comes in Red or Black; Taylors are red, black, and blue. $75 shipped for MSDs and $65 for Taylors.
*today I have also tried to get my plugs and wires installed and realized the stockers were not going to work so I will be using the Taylors.

boostat4500 · 08-01-2009, 03:58 PM

Quick heads up on the wires. Spend the extra for the MSD wires. I've used both the MSD and Taylor wires. The Taylor were crap. The first time I had to remove them, 4 of the 8 came apart and were trash. And they were only on the truck less than 1k miles. I've had the MSD's on and of multiple times on many different vehicles and never had a problem. Just my .02

Prathbun · 08-01-2009, 05:52 PM

Quote:

Originally Posted by boostat4500

Quick heads up on the wires. Spend the extra for the MSD wires. I've used both the MSD and Taylor wires. The Taylor were crap.

All I need is a part number for the MDS's (or a description that I can look up) so I can place an order. I would like to get the right wires right off the bat.

Thanks for the input!!! I was almost sold on the Taylor wires.

Shon · 08-01-2009, 07:21 PM

Quote:

Originally Posted by Prathbun

All I need is a part number for the MDS's (or a description that I can look up) so I can place an order. I would like to get the right wires right off the bat.

PM'd you.

here are some pix from today.
blue wires are stock GM unit from the motor I got and the red ones are the F-body ones that I will be replacing with black ones.

pcmcobra · 08-01-2009, 09:05 PM

on the msd wires...
pm me and I can give you info on best price anywhere.

gregbr · 08-01-2009, 09:11 PM

Makes me want another project, GREAT work!

brossow · 08-01-2009, 09:41 PM

Quote:

Originally Posted by Prathbun

All I need is a part number for the MDS's (or a description that I can look up) so I can place an order. I would like to get the right wires right off the bat.

Thanks for the input!!! I was almost sold on the Taylor wires.

I just ordered two sets from this guy. Best price anywhere and you can add a set of NGK plugs for only $10.

http://estore.websitepros.com/212053...ark+Plug+Wires

atp · 08-08-2009, 01:32 PM

Jamie sent you a PM but it said you box was full.

Hey Jamie - I ordered a set of the LS swap headers and I am trying to run them with Porterbuilt's dropmember-c4 but I am having some clearance issues. I was curious if you guys have any experience with his dropmember? I guess it sets the motor back a bit and causes the headers to hit the firewall. I wanted to check with you to see if you had any advice before getting another type of header.

BigShoe24 · 08-20-2009, 12:44 AM

Any word on the clearance issue with the Porterbuilt DM? I was planning on ordering a set of these, but sounds like they won't work. ATP, have you fond any alternatives? Thanks

PBFAB.COM · 08-20-2009, 01:00 AM

Hoping to figure something out.... maybe some Porterbuilt Headers will surface in the near future?

BigShoe24 · 08-21-2009, 08:14 AM

Quote:

Originally Posted by porterbuilt

Hoping to figure something out.... maybe some Porterbuilt Headers will surface in the near future?

I like the sounds of that. Go ahead and send me out a pair!

07-22-2009, 12:27 AM	#101
brossow Amateur Rust Fighter Join Date: Sep 2007 Location: Mankato, MN Posts: 1,087	Re: The LS1 swap headers are done!!!! Just a quick note for anyone else looking for a dipstick. There's a typo in the first post in the thread. The correct part number for the Lokar dipstick is ED-5008 and not ED-5800 as listed. Hope this helps someone! __________________ Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...)

07-23-2009, 02:20 PM	#102
brossow Amateur Rust Fighter Join Date: Sep 2007 Location: Mankato, MN Posts: 1,087	Re: The LS1 swap headers are done!!!! Ordering update: Just got off the phone with Nick @ Thorley and he's no longer offering the discounted price mentioned in the first post, but one of their distributors (BJ's Off-Road) is. Just finished placing my order. Here's the contact info: Phone: 253-265-6678, ask for Brent (no, not me!) URL: bjsoffroad.com (these aren't on their site, however) My price was $525 plus $30 shipping to Minnesota. Nick @ Thorley sent an IM to Brent @ BJ's and Brent called me back within a couple minutes of my hanging up with Nick. Friendly, painless transaction. It should go without saying, but just in case ... I have no connection whatsoever with this business except having placed an order with them. Posting this info to help save someone a phone call. Brent __________________ Brent '72 Chevy SWB stepside - [ Build Thread ] '79 ChevMC SWB fleetside - [ Build Thread ] '64 Chevy SWB fleetside & '66 Chevy SWB stepside (waiting in the wings...) Last edited by brossow; 07-23-2009 at 02:27 PM.

07-23-2009, 03:42 PM	#103
'72customdeluxe Registered User Join Date: Jan 2008 Location: Tejas Posts: 691	Re: The LS1 swap headers are done!!!! Hey, do your tri-y headers for the original style small block in a C10 hang below the frame? __________________ '72 cheyenne super step, '05 long bed gmc

07-23-2009, 07:58 PM	#104
boostat4500 Registered User Join Date: Aug 2006 Location: Reno, NV Posts: 346	Re: The LS1 swap headers are done!!!! Still wondering if these will work in a 4x4? Anybody? Thanks. __________________ 1971 Suburban 4x4, LQ4 6.0L, 4L80E, etc.

07-23-2009, 10:16 PM	#105
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: The LS1 swap headers are done!!!! These look pretty quality. Anyone think they'd fit a 5.7 with a 4l80e mounted to a Porterbuilt Dropmember. This is all stuffed in a 67 btw. Thanks in advance. __________________ RCC

07-29-2009, 01:22 AM	#106
shrtbx Registered User Join Date: Feb 2007 Location: los angeles Posts: 202	Re: The LS1 swap headers are done!!!! are your 73-87 ls1 headers carb approved? making a swap in a few months and was curious

07-29-2009, 09:44 AM	#107
Shon Registered User Join Date: Sep 2005 Location: sc Posts: 1,203	Re: The LS1 swap headers are done!!!! if somoene will answer their PM I will become a sponsor here and offer these headers at a GOOD price! __________________ 71 Cheyenne C10 LWB cam'd 6.0/T56 Swap

07-29-2009, 09:58 PM	#108
green68 Registered User Join Date: May 2009 Location: cajun Posts: 42	Re: The LS1 swap headers are done!!!! this may help with anyone using doug thorley headers with 383.

07-30-2009, 08:31 AM	#109
Shon Registered User Join Date: Sep 2005 Location: sc Posts: 1,203	Re: The LS1 swap headers are done!!!! I am now a site vendor!! These headers I will ship out to you for $535. I will get them added to the website soon, but until then please PM me and I will get payment information set up for you! THANKS!! __________________ 71 Cheyenne C10 LWB cam'd 6.0/T56 Swap

08-01-2009, 02:04 PM	#114
Prathbun Registered User Join Date: Jul 2007 Location: Poplar Bluff, MO 63901 Posts: 293	Re: The LS1 swap headers are done!!!! Here are my pics. This is a '69 frame with a 5.3 / 4lL60. Will the exhaust man be able to make a slight bent in my exhaust pipe (just out of the header) to make it up and over the OEM cross member?? Also, I need more information on the plug wires I need to use. I would like to find some that are already cut to the proper length. Any ideas?? If you look close, I had already cut my frame before I bought these. Very pleased with these headers!!! Attached Images __________________ It's Not Rust, It's Patina!! 1967 C 20 Large Window, 700R4, 283, Tilt, PS, PB.....A Rusty But Trusty Gas Hog 2008 Silverado LTZ 1500 4x4

08-01-2009, 03:58 PM	#116
boostat4500 Registered User Join Date: Aug 2006 Location: Reno, NV Posts: 346	Re: The LS1 swap headers are done!!!! Quick heads up on the wires. Spend the extra for the MSD wires. I've used both the MSD and Taylor wires. The Taylor were crap. The first time I had to remove them, 4 of the 8 came apart and were trash. And they were only on the truck less than 1k miles. I've had the MSD's on and of multiple times on many different vehicles and never had a problem. Just my .02 __________________ 1971 Suburban 4x4, LQ4 6.0L, 4L80E, etc. Last edited by boostat4500; 08-01-2009 at 03:58 PM.

08-01-2009, 09:05 PM	#119
pcmcobra Registered User Join Date: Aug 2006 Location: Florida Posts: 1,684	Re: The LS1 swap headers are done!!!! on the msd wires... pm me and I can give you info on best price anywhere. __________________ 1986 C10 SWB 6.0/6l90e Miami...Flee it like a native

08-01-2009, 09:11 PM	#120
gregbr Senoir Member Join Date: Mar 2002 Location: Rock Hill, SC USA Posts: 1,214	Re: The LS1 swap headers are done!!!! Makes me want another project, GREAT work! __________________ 67 Chevy, Small back glass, Factory 4WD, Factory Shortbed, Factory V8, Lifted 4" 70 GMC Sierra Grande, Factory Shortbed, Factory 402/400 turbo, Super Custom Interior. Numbers matching with SPID & Build Sheet. 68K Original Miles. Restored 2010 70 GMC Restoration Pictures http://67-72chevytrucks.com/gallery/...00&ppuser=4424

08-08-2009, 01:32 PM	#122
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: The LS1 swap headers are done!!!! Jamie sent you a PM but it said you box was full. Hey Jamie - I ordered a set of the LS swap headers and I am trying to run them with Porterbuilt's dropmember-c4 but I am having some clearance issues. I was curious if you guys have any experience with his dropmember? I guess it sets the motor back a bit and causes the headers to hit the firewall. I wanted to check with you to see if you had any advice before getting another type of header.

08-20-2009, 12:44 AM	#123
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: The LS1 swap headers are done!!!! Any word on the clearance issue with the Porterbuilt DM? I was planning on ordering a set of these, but sounds like they won't work. ATP, have you fond any alternatives? Thanks __________________ RCC



Register or Log In To remove these advertisements.

08-20-2009, 01:00 AM	#124
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: The LS1 swap headers are done!!!! Hoping to figure something out.... maybe some Porterbuilt Headers will surface in the near future? __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.